I have just added a linear impulse function to move my object from left to right when the user moves their finger back and forward across the screen. The object is also falling by the worlds gravity.
After the object reaches a boundary i want to stop the linear impulse. I understand that i should add linear dampening however that then stops the gravity for applying its force.
Is there anyway i can stop the side to side impulse without effecting the gravity.
Thanks
Yes, simply set body.linearVelocity.x = 0;
Related
I have made a rigid body for the player and have been trying to get the rigid body moving along with the player's controls.
What I mean is that whenever I press forward I want the rigid body to move forward in the direction the player is facing, same with back, left, right. So far I'm able to use apply force to move the rigid body in static directions.
My straight question is how do I move the player's rigid body in the direction the player is facing.
Other Details:
I don't really want to use kinematic bodies if not necessary mostly because their very fiddly at the moment
I'm using glfw3 for input
This is quite amazing that you would not see how to do that after you actually managed to apply forces in static directions to something you configured over bullet.
Come on, you HAVE the skill to figure it out.
Here, just a push in the direction (hehe), hem. Just take the vector of the facing direction (which could be determined by camera, 1st or 3rd view, or even something else...).
Congrats, this vector is your force by a k factor.
You should also modulate this force according to speed, you don't need to accelerate to infinite speed, just accelerate lots at first and then regulate force to tend to desired walk speed.
Then, the side directions are obtained by rotating the facing vector by 90 degrees around the standing axis (most surely the vertical). You can obtain that by simply swapping components and multiplying by -1 one of them. x,y,z becomes y,-x,z
To go backward, its just -x, -y, -z on the facing vector.
So your up key is not bound to 0,1,0 but to facing_dir actually. This facing dir can change with mouse or some other view controls, like numeric keys 2,6,8,4 for example. Or you could drop up,left,right,down for movement and use w,a,s,d like everybody else, and use direction keys to rotate facing direction. (+mouse)
It is much more difficult to obtain the facing vector from mouse movement or direction keys than finding out how to apply the force, so if you already have the facing vector I'm puzzled that you even have a problem.
I'm working on a Little Mobile Game with Cocos2D-X and Box2D.
The Point where I got stuck is the movement of a box2d-body (the main actor) and the according Sprite. Now I want to :
move this Body with a constant velocity along the x-axis, no matter if it's rolling (it's a circleshape) upwards or downwards
keep the body nearly sticking to the ground on which it's rolling
keep the Body and the according Sprite in the Center of the Screen.
What I tried :
in the update()- method I used body->SetLinearVelocity(b2Vec2(x,y)) to higher/lower values, if the Body was passing a constant value for his velocity
I used to set very high y-Values in body->SetLinearVelocity(b2Vec2(x,y))
First tried to use CCFollow with my playerSprite, which was also Scrolling along the y-axis, as i only need to scroll along the x-axis, so I decided to move the whole layer which is containing the ambience (platforms etc.) to the left of my Screen and my Player Body & Player sprite to the right of the Screen, adjusting the speed values to Keep the Player in the Center of the Screen.
Well...
...didn't work as i wanted it to, because each time i set the velocity manually (I also tried to use body->applyLinearImpulse(...) when the Body is moving upwards just as playing around with the value of velocityIterations in world->Step(...)) there's a small delay, which pushes the player Body more or less further of the Center of the Screen.
... didn't also work as I expected it to, because I needed to adjust the x-Values, when the Body was moving upwards to Keep it not getting slowed down, this made my Body even less sticky to the ground....
... CCFollow did a good Job, except that I didn't want to scroll along the y-axis also and it Forces the overgiven sprite to start in the Center of the Screen. Moving the whole Layer even brought no good results, I have tried a Long time to adjust values of the movement Speed of the layer and the Body to Keep it negating each other, that the player stays nearly in the Center of the Screen....
So my question is :
Does anyone of you have any Kind of new Approach for me to solve this cohesive bunch of Problems ?
Cheers,
Seb
To make it easy to control the body, the main figure to which the force is applied should be round. This should be done because of the processing mechanism of collisions. More details in this article: Why does the character get stuck?.
For processing collisions with the present contour of the body you can use the additional fixtures and sensors with an id or using category and mask bits. For of constant velocity is often better to use SetLinearVelocity, because even when using impulse velocity gets lost at sharp uphill or when jumping. If you want to use the implulse to change the position of the body, then you need to use the code for the type of this:
b2Vec2 vel = m_pB2Body->GetLinearVelocity();
float desiredVel = mMoveSpeed.x; //set there your speed x value
float velChange = desiredVel - vel.x;
float impulse = m_pB2Body->GetMass() * velChange;
m_pB2Body->ApplyLinearImpulse( b2Vec2(impulse, mMoveSpeed.y), m_pB2Body->GetWorldCenter());
This will allow maintain a constant speed most of the time. Do not forget that these functions must be called every time in your game loop. You can combine these forces, depending on the situation. For example, if the at the beginning you need to make a small acceleration, it is possible to use ApplyForce to the body, and when a desired speed is to use ApplyLinearImpulse or SetLinearVelocity. How correctly to use it is described here: Moving at constant speed
If you use world with the normal gravity(b2Vec2(0, -9.81)), then it should not be a problem.
I answer for this question here: Cocos2D-x - Issues when with using CCFollow. I use this code, it may be useful to you:
CCPoint position = ccpClamp(playerPosition, mLeftBounds, mRightBounds);
CCPoint diff = ccpSub(mWorldScrollBound, mGameNode->convertToWorldSpace(position));
CCPoint newGameNodePosition = ccpAdd(mGameNode->getPosition(), mGameNode->getParent()->convertToNodeSpace(diff));
mGameNode->setPosition(newGameNodePosition);
P.S. If you are new to box2d, it is advisable to read all the articles iforce2d(tuts), they are among the best in the network, as well as his Box2D Editor - RUBE. At one time they really helped me.
I do not know if this is possible but I have an idea:
Keep the circle at a fixed position and move the background relatively. For example, during the course of the game, if the circle has a velocity of 5 towards left then keep circle fixed and move screen with velocity 5 towards right. If circle has 5 velocity towards left and screen has 3 velocity towards right, then keep circle fixed and move screen with 8 velocity towards left and so on. This should allow you to fix the circle at the center of the screen.
Another method would be to translate the entire screen along with the ball. Make everything on the screen an object that can have a velocity. And the x-component of the velocity of the ball (circle) should be the velocity of all other objects. This way, whenever the circle moves, all the other objects will try and keep up with it.
In my game i am using LinearImpuls for jump player body and ApplyForce for movement left-right .But the problem is that when player jump at that time if movement occur then player speed so increases its just look like running on air.
So what to do to resolve this problem??
Thanks in advance
I think keeping a check by boolean variable in code that at one time only one action can be performed either jump or moving left and right will solve the problem until and unless it does not affect your required movement.
One of the powerups in my game is a vortex that attracts all coins. I know I have any cocos2d's moveto/bezierto methods available, but I don't know how to make them have tangential and radial speed.
The extra difficulty is that the vortex center can change in every step, so all movement has to be readjusted.
One way to achieve this without a physics engine is to use the rotation around point algorithm.
That covers the rotation around the vortex center. Once an object is rotation around the vortex, all you need to do is to reduce that object's distance from the center by a certain amount every frame. That way it will continue to move inwards.
The only tricky part then is to get the object from its initial position being "sucked into" the vortex. There's going to be a lot of tweaking needed. With a physics engine, that part would come natural from the physics itself and it would always look right.
This is not guaranteed for the manual solution and definitely not for actions, which aren't designed to track moving targets. For example, if you change a move action every frame by replacing the existing one with a new one, your object won't move at all. Every time you do that, there's a 1-frame delay before the new action does its work.
I am developing third-person shooting game using Bullet and Ogre. When the character model collides with an object in the world, such as a power-up, the collision applies a force to the character and causes them to spin. How can I prevent the collision applying a force to the character?
I have set a method for btDynamicsWorld::setInternalTickCallback and so I know which bodies are colliding and the btManifoldPoint.
Note that I applyTorque to the body in order to rotate them smoothly so I cannot simply prevent rotation.
Thanks for your help.
I am unfamiliar with the physics engines you mentioned, but I know a thing or two about real physics...
Basically if you draw a free body diagram and arrows that represent the forces, you can determine the net effect. Or if you know the desired net effect, you can figure out where you need to add forces or remove forces.
You could add an equal and opposite force/torque at the time of impact. This would make the net forces on your object zero.
Or you could take the elements that are causing the forces and make them massless. Force = mass * acceleration. If the mass is zero and your physics engine is based on real world physics, then it shouldn't cause any net forces on collision.
Hope that helps.