There seems to be conflicting information about batteries installation. I have tried several suggestions, but none have worked for me.
I first tried
ocamlfind batteries/ocaml
but that gave this error:
ocamlfind: Cannot find command: /username/godi/lib/ocaml/pkg-lib/batteries/ocaml
I then tried copying the ocamlinit file from the batteries directory to .ocamlinit in my home directory. This gave this error:
Cannot find file topfind.
File ".ocamlinit", line 38, characters 0-20:
Error: Unbound module Toploop
I am using ocaml 4.00.1.
Note: I apologize if this question is redundant with this one ocaml batteries compiling : Unbound module Toploop but the answer given was not explicit enough for me to actually try.
Like #rgrinberg said, try to install batteries with opam. For that, first download the quick installer:
$ wget http://www.ocamlpro.com/pub/opam_installer.sh
Then execute this script:
$ sh ./opam_installer.sh /usr/local/bin
It will install the latest "stable" opam (you can of course change the path /usr/local/bin) and the latest version of the OCaml compiler.
After that, you just need to run:
$ opam install batteries
and it should be ok.
You can also check ocaml.org install section (by package manager) or opam website.
Related
I'm trying to use the "Batteries" module, but... it doesnt work!
Here is an example:
open Batteries;;
print_endline (dump [5;4;2]);;
I'm compiling with: opam exec ocamlc main.ml the error message is:
File "main.ml", line 1, characters 5-14:
1 | open Batteries;;
^^^^^^^^^
Error: Unbound module Batteries
and the Batteries module seems installed:
$ opam install Batteries
[NOTE] Package batteries is already installed (current version is 3.0.0).
What am I missing?
Just installing a library is not enough, you have to tell the compiler that you want to link it (the compiler itself doesn't know anything about opam). There are many compilation and configuration tools available for OCaml, here's just one of the ways to build a binary that uses batteries
ocamlbuild -pkg batteries main.native
I'm using MinGW64 via an MSYS2 download and am currently trying to install the Solar Geometry 2 library (http://www.oie.mines-paristech.fr/Valorisation/Outils/Solar-Geometry/) for use. I'm following their install README, which states to navigate to the directory and "configure" (I've been typing "./configure". However, when I do so, I get the following message in my terminal:
$ ./configure
configure: loading site script /mingw64/etc/config.site
/mingw64/etc/config.site: line 13: config.site:13: default build_alias set to x6_64-w64-mingw32: command not found
/mingw64/etc/config.site: line 20: config.site:20: default prefix set to /mingw4: No such file or directory
configure: error: cannot find install-sh or install.sh in . ./.. ./../..
When I initially installed MSYS2 I set up the etc/fstab file as recommended. However, I'm quite new to MSYS so I'm assuming I botched something in my setup. I haven't edited anything in the config.site file mentioned in the errors, so I'm wondering if it's something in there.
Any help is greatly appreciated, thank you
No where in the directions for "Solar Geometry" do I see reference to MSys or MSys2.
I suggest you install the compiler toolchain and base development file. No idea if you editing /etc/fstab will cause problems. I do not normmaly edit it!
Install MinGW Package build packages. You might need more packages installed.
pacman -S --needed base-devel mingw-w64-x86_64-toolchain
I've installed opam, run opam init, run opam switch 4.06.0 which created a 4.06.0 directory inside ~/.opam, run "eval opam confing env" which exports $OCAML_TOPLEVEL_PATH as ~/.opam/4.06.0/lib/toplevel amongst other things, when launching ocaml I get the dreaded:
$ ocaml
OCaml version 4.06.0
Cannot find file topfind.
Unknown directive `camlp4o'.
#
I've looked at this and this neither of which address my issue and I'm at my wits' end (first time setting up OCaml). This is my ~/.ocamlinit:
(* Added by OPAM. *)
let () =
try Topdirs.dir_directory (Sys.getenv "OCAML_TOPLEVEL_PATH")
with Not_found -> ()
;;
#use "topfind"
#camlp4o
#thread
#require "core.top"
#require "core.syntax"
EDIT: Looks like I hadn't installed core, installing core resolved that but now amongst the slew of import diagnostics I get:
Exception:
Invalid_argument
"The ocamltoplevel.cma library from compiler-libs cannot be loaded inside the OCaml toplevel".
And then a bit further down:
Raised at file "pervasives.ml", line 33, characters 25-45
Called from file "toplevel/toploop.ml", line 468, characters 4-128
Called from file "toplevel/topdirs.ml", line 144, characters 10-51
Camlp4 Parsing version 4.06.0
You should run
eval `opam config env`
Note the backticks. They are usually located to the left of the key 1 on most modern keyboards. The command should not output anything, if you see any output it means that you're running it incorrectly. You have to run this command to activate the opam installation every time you start a new shell (unless you've put this command in your shell initialization scripts, like .bashrc)
If the problem persists, then make sure, that you have installed the ocamlfind package,
opam install ocamlfind
What seemed to work for me:
make sure core is installed (opam install core)
make sure camlp4 is installed (opam install camlp4)
Insert Topfind.don't_load ["compiler-libs.toplevel"];; in-between #use "topfind";; and #require "core.top";;, as per this. It is an issue that doesn't appear to be fixed in the latest version of core (0.9.2).
Preface: I am new to OCaml, OPAM, and OASIS.
tldr question: How do I properly set up a package with opam that is not already available in the repository (I can't just do opam install X)? More details follow:
I am trying to include ocaml-glpk in an OCaml project. I installed ocaml-glpk just by running make and make install as stated in the README, and the given example compiles and runs correctly. However, I am using OASIS to generate the build system of my project, and I am not sure how to set it up. I have the same example (renamed to glpkExample.ml in a src folder) and the following in my _oasis file:
Executable "glpkExample"
Path: src
MainIs: glpkExample.ml
CompiledObject: best
BuildDepends:
glpk
After running oasis setup -setup-update dynamic, I run make and get the following error:
ocaml setup.ml -build
Finished, 0 targets (0 cached) in 00:00:00.
+ /home/dimitrios/.opam/system/bin/ocamlfind ocamlopt -g -linkpkg -package glpk src/glpkExample.cmx -o src/glpkExample.native
File "_none_", line 1:
Error: Cannot find file /home/dimitrios/.opam/system/lib/glpk/glpk.cmxa
Command exited with code 2.
Compilation unsuccessful after building 4 targets (3 cached) in 00:00:00.
E: Failure("Command ''/usr/bin/ocamlbuild' src/glpkExample.native -tag debug' terminated with error code 10")
make: *** [build] Error 1
It seems the glpk library is missing a cmxa file needed to compile a native executable. I am not sure how to fix this. To compile glpkExample.ml correctly, my Makefile includes /home/dimitrios/.opam/system/lib/glpk and also uses the OCamlMakefile, which is extremely long and convoluted. Any help on setting this up with OASIS or how to get ocaml-glpk to work nicely with OASIS would be greatly appreciated.
Thanks!
This website is not appropriate for bug reports. You should really report it here.
The temporary solution is to use CompiledObject: byte to compile in bytecode.
If you're using opam then it is best to install application with it, not manually. Try to clean up your system and remove whatever you installed, and then do:
$ eval `opam config env`
$ opam install ocaml-glpk
Afterwards, if glpk is packaged in opam correctly, it should work with your setup, i.e., just with oasis's BuildDepends field and nothing more.
In my project I have a file that uses Core.Std stuff, so I have run
opam install core
and added
open Core.Std
in my file.
When I run
ocamlbuild myprogram.native
it says:
Error: Unbound module Core
pointing to line with the open statement above.
So, I try this:
ocamlbuild -use-ocamlfind -pkgs core.std myprogram.native
and get the following message:
ocamlfind: Package `core.std' not found
So I thought that maybe I needed to run opam install core.std as well, but apparently there is no such thing according to opam. I also tried "open Core.Std;;" in the ocaml repl, but that did not work either. Any ideas?
You can either use corebuild which is usually shipped with this library or, you can try this:
ocamlbuild -use-ocamlfind -pkg core
P.S. use ocamlfind list command to view the list of available packages.
P.P.S. In addition to corebuild they usually ship coretop, a script that allows you to run core-enabled top-level. It uses utop underneath the hood, so make sure that you have installed it with opam install utop (if you're using opam), before your experiments.
Remove .std from your ocamlbuild cmd?