Ok so this is killing me at the moment cause its such a simple part of my program that just doesn't want to work. I'm reading data from a textfile to use in a GA.
The first getline() works perfectly, but the second one doesn't want to write any data into my string. When i cout the string it doesn't show anything.
Here is the code:
ifstream inFile;
inFile.open(fname.c_str());
char pop[20], mut[20];
inFile.getline(pop,20);
cout << pop;
inFile.getline(mut,20);
cout << mut; //this outputs nothing
Thanks for any help in advance.
A sample form my file:
there is no line between them mutation is the line straight after population
Population size: 30
Mutation: 20
Your file's first line is 20 characters long (19+new line) but pop[20] can only contain 19 (because the last one is reserved for the null terminator '\0').
When istream::getline stops because it has extracted 20-1 characters, it doesn't discard the new line delimiter (because it was never read). So the next getline just reads the end of the first line, discarding the new line.
That's why you get nothing in the second string.
Your problem is that the length of your input line exceeds the length of the buffer which must hold it.
The solution is to not use character arrays. This is C++, use std::string!
std::ifstream inFile;
inFile.open(fname.c_str());
std::string pop;
std::getline(inFile, pop);
cout << pop << "\n";
std::string mut;
std::getline(inFile, mut);
cout << mut << "\n";
I think you need to find out what the problem is. Add error checking code to your getline calls, refactor the (simple) code into a (simple) function, with a (simple) unittest. Possibly, your second line is longer than the assumed 20 characters (null-term included!).
For an idea of what I mean, take a look at this snippet.
try something like
while (getline(in,line,'\n')){
//do something with line
}
or try something like
string text;
string temp;
ifstream file;
file.open ("test_text.txt");
while (!file.eof())
{
getline (file, temp);
text.append (temp); // Added this line
}
Related
I am having set of data stored in a file which are basically names. My task is to get all the first letters from each name. Here is the file:
Jack fisher
goldi jones
Kane Williamson
Steaven Smith
I want to take out just first word from each line(ex. jack, goldi, kane, Steaven)
I wrote following code for it, just to take take out 2 names. Here it is:
string first,last;
ifstream Name_file("names.txt");
Name_file>>first;
Name_file>>endl;
Name_file>>last;
cout<<first<<" "<<last;
it is giving error. If I remove endl, it takes the first full name(Jack, fisher) whereas I want it should take (jack ,goldi). How to do it ? Any idea? Thanks in advance for help.
Name_file>>endl; is always wrong.
Even then, you can't use >> like that, it will stop on a space, which is why when you remove endl you see the problem that first and last contain only the first line.
Use std::getline to loop over your file instead and get the full names, then split the line on the first space to get the first name:
ifstream Name_file("names.txt");
std::string line;
while (std::getline(Name_file, line))
{
std::string firstName = line.substr(0, line.find(' '));
//do stuff with firstName..
}
Though I don't mind "Hatted Rooster"implementation I think it can be a little less efficient when the input suddenly contains a very long line.
I would use ignore() to remove the rest of the line:
int main()
{
std::ifstream nameFile("names.txt");
std::string firstName;
while (nameFile >> firstName)
{
// You got a first name.
// Now dump the remaing part of the line.
nameFile.ignore(std::numeric_limits<std::streamsize>::max(), '\n');
}
}
I hope this solves your query.
ifstream Name_file;
string line;
Name_file.open("names.txt");
if(Name_file.fail()){ cerr<<"Error opening file names.txt !!"<<endl;return;}
vector<string> v; // array to store file names;
while(Name_file >> line){
string word;
getline(Name_file, word);
v.push_back(line);
}
// printing the first names
for(int i = 0; i < v.size();i++){
cout<<v[i]<<endl;
}
Basically my issue is that I'm trying to read in data from a .txt file that's full of numbers and comments and store each line into a string vector, but my getline function stops reading at the first whitespace character so a comment like (* comment *) gets broken up into
str[0] = "(*";
str[1] = "comment";
str[2] = "*)";
This is what my codeblock for the getline function looks like:
int main() {
string line;
string fileName;
cout << "Enter the name of the file to be read: ";
cin >> fileName;
ifstream inFile{fileName};
istream_iterator<string> infile_begin {inFile};
istream_iterator<string> eof{};
vector<string> data {infile_begin, eof};
while (getline(inFile, line))
{
data.push_back(line);
}
And this is what the .txt file looks like:
101481
10974
1013
(* comment *) 0
28292
35040
35372
0000
7155
7284
96110
26175
I can't figure out why it's not reading the whole line.
This is for the very simple reason that your code is not using std::getline to read the input file.
If you look at your code very carefully, you will see that before you even get to that point, your code constructs an istream_iterator<string> on the file, and by passing it, and the ending istream_iterator<string> value to the vector's constructor, this effectively swallows the entire file, one whitespace-delimited word at a time, into the vector.
And by the time things get around to the getline loop, the entire file has already been read, and the loop does absolutely nothing. Your getline isn't really doing anything, with the current state of affairs.
Get rid of that stuff that involves istream_iterators, completely, and simply let getline do the job it was intended for.
Using fstreams I have a file opened that contains numerous lines. Each contiguos set of 4 lines are such that: the first line is an int, the second and third are strings and fourth is a double. This sequence continues till EOF.
I'm attempting to load these lines into a struct array:
struct Library {
int id;
string title;
string artist;
double price;
};
and the code I'm trying to implement to load data into the struct is this:
const int LIMIT = 10
Library database[LIMIT];
ifstream file;
file.open("list.txt");
if(file) {
while(!(file.eof()) && counter < LIMIT) {
file >> database[counter].id;
getline(file, database[counter].title;
getline(file, database[counter].artist;
file >> database[counter].price;
}
} else {
...
}
// Using the following to debug output
for(int i = 0; i < counter; i++) {
cout << "ID: " << database[i].id << endl
<< "Title: " << database[i].title << endl
<< "Artist: " << database[i].artist << endl
<< "Price: " << database[i].price << endl
<< "-----------------------" << endl;
}
The file I'm trying to throw at this thing is
1234
Never Gonna Give You Up
Rick Astley
4.5
42
Thriller
Michael Jackson
32.1
The problem I'm having here is that between reading the id and title using file >> ... and getline(...) is that somewhere a newline bite is being introduced screwing up the output, which displays this monstrosity...
ID: 1234
Title:
Artist: Never Gonna Give You Up
Price: 0
--------------------
ID: 0
Title:
Artist:
Price: 0
--------------------
The solution is probably the most basic of solutions, but mainly because I can't figure out exactly what is going on with the newline bite I can't combobulate a phrase to shove into google and do my stuff there, and I'm at the stage where I've been looking at a problem so long, basic knowledge isn't working properly - such as how to handle basic input streams.
Any form of help would be much appreciated! Thanks in advance :)
This happens because the >> operator for the input stream only grabs part of a line, and does not always grab the newline character at the end of the line. When followed by a call to getline, the getline will grab the rest of the line previously parsed, not the line after it. There are a few ways to solve this: you can clear the buffer from the input stream after each read, or you can simply get all your input from getline and just parse the resulting strings into an integer or a double when you need to with calls to stoi or stod.
As a side note, you don't want to detect the end of your file the way you presently are. See why is eof considered wrong inside a loop condition?
You can solve this problem by adding:
fflush(file);
everytime before you use getline(file, ...). Basically this will clear the input buffer before you use the getline() function. And fflush() is declared in the cstdio library.
file >> database[counter].id;
will read, in this case, a whitespace separated sequence of characters that is interpreted as an int. The newline is considered whitespace. You should now be sitting on that newline character, thus the getline() will read nothing -- successfully -- and increment the file position just past that.
You may be better off using getline() for each line and then separately interpreting the lines from the reading. For example, the first line read could be interpreted with a subsequent std::stoi() to get the integer representation from the string.
C++ ifstream get line change getline output from char to string
I got a text file.. so i read it and i do something like
char data[50];
readFile.open(filename.c_str());
while(readFile.good())
{
readFile.getline(data,50,',');
cout << data << endl;
}
My question is instead of creating a char with size 50 by the variable name data, can i get the getline to a string instead something like
string myData;
readFile.getline(myData,',');
My text file is something like this
Line2D, [3,2]
Line3D, [7,2,3]
I tried and the compiler say..
no matching function for getline(std::string&,char)
so is it possible to still break by delimiter, assign value to a string instead of a char.
Updates:
Using
while (std::getline(readFile, line))
{
std::cout << line << std::endl;
}
IT read line by line, but i wanna break the string into several delimiter, originally if using char i will specify the delimiter as the 3rd element which is
readFile.getline(data,50,',');
how do i do with string if i break /explode with delimiter comma , the one above. in line by line
Use std::getline():
std::string line;
while (std::getline(readFile, line, ','))
{
std::cout << line << std::endl;
}
Always check the result of read operations immediately otherwise the code will attempt to process the result of a failed read, as is the case with the posted code.
Though it is possible to specify a different delimiter in getline() it could mistakenly process two invalid lines as a single valid line. Recommend retrieving each line in full and then split the line. A useful utility for splitting lines is boost::split().
once again I ask for help. I haven't coded anything for sometime!
Now I have a text file filled with random gibberish. I already have a basic idea on how I will count the number of occurrences per word.
What really stumps me is how I will determine what line the word is in. Gut instinct tells me to look for the newline character at the end of each line. However I have to do this while going through the text file the first time right? Since if I do it afterwords it will do no good.
I already am getting the words via the following code:
vector<string> words;
string currentWord;
while(!inputFile.eof())
{
inputFile >> currentWord;
words.push_back(currentWord);
}
This is for a text file with no set structure. Using the above code gives me a nice little(big) vector of words, but it doesn't give me the line they occur in.
Would I have to get the entire line, then process it into words to make this possible?
Use a std::map<std::string, int> to count the word occurrences -- the int is the number of times it exists.
If you need like by line input, use std::getline(std::istream&, std::string&), like this:
std::vector<std::string> lines;
std::ifstream file(...) //Fill in accordingly.
std::string currentLine;
while(std::getline(file, currentLine))
lines.push_back(currentLine);
You can split a line apart by putting it into an std::istringstream first and then using operator>>. (Alternately, you could cobble up some sort of splitter using std::find and other algorithmic primitaves)
EDIT: This is the same thing as in #dash-tom-bang's answer, but modified to be correct with respect to error handing:
vector<string> words;
int currentLine = 1; // or 0, however you wish to count...
string line;
while (getline(inputFile, line))
{
istringstream inputString(line);
string word;
while (inputString >> word)
words.push_back(pair(word, currentLine));
}
Short and sweet.
vector< map< string, size_t > > line_word_counts;
string line, word;
while ( getline( cin, line ) ) {
line_word_counts.push_back();
map< string, size_t > &word_counts = line_word_counts.back();
istringstream line_is( line );
while ( is >> word ) ++ word_counts[ word ];
}
cout << "'Hello' appears on line 5 " << line_word_counts[5-1]["Hello"]
<< " times\n";
You're going to have to abandon reading into strings, because operator >>(istream&, string&) discards white space and the contents of the white space (== '\n' or != '\n', that is the question...) is what will give you line numbers.
This is where OOP can save the day. You need to write a class to act as a "front end" for reading from the file. Its job will be to buffer data from the file, and return words one at a time to the caller.
Internally, the class needs to read data from the file a block (say, 4096 bytes) at a time. Then a string GetWord() (yes, returning by value here is good) method will:
First, read any white space characters, taking care to increment the object's lineNumber member every time it hits a \n.
Then read non-whitespace characters, putting them into the string object you'll be returning.
If it runs out of stuff to read, read the next block and continue.
If the you hit the end of file, the string you have is the whole word (which may be empty) and should be returned.
If the function returns an empty string, that tells the caller that the end of file has been reached. (Files usually end with whitespace characters, so reading whitespace characters cannot imply that there will be a word later on.)
Then you can call this method at the same place in your code as your cin >> line and the rest of the code doesn't need to know the details of your block buffering.
An alternative approach is to read things a line at a time, but all the read functions that would work for you require you to create a fixed-size buffer to read into beforehand, and if the line is longer than that buffer, you have to deal with it somehow. It could get more complicated than the class I described.