I am trying to run a Swift app on my iPhone 4s. It works fine on the simulator, and my friend can successfully run it on his iPhone 4s. I have iOS 8 and the official release of Xcode 6.
I have tried
Restarting Xcode, iPhone, computer
Cleaning & rebuilding
Revoking and creating new certificate/provision profile
Runpath Search Paths is $(inherited) #executable_path/Frameworks
Embedded Content Contains Swift Code is 'Yes'
Code Signing Identity is developer
Below is the error in entirety
dyld: Library not loaded: #rpath/libswiftCore.dylib
Referenced from: /private/var/mobile/Containers/Bundle/Application/LONGSERIALNUMBER/AppName.app/AppName
Reason: no suitable image found. Did find:
/private/var/mobile/Containers/Bundle/Application/LONGSERIALNUMBER/AppName.app/Frameworks/libswiftCore.dylib: mmap() error 1 at
address=0x008A1000, size=0x001A4000 segment=__TEXT in Segment::map() mapping
/private/var/mobile/Containers/Bundle/Application/LONGSERIALNUMBER/APPLICATION_NAME/Frameworks/libswiftCore.dylib
For me none of the previous solutions worked. We discovered that there is an "Always Embed Swift Standard Libraries" flag in the Build Settings that needs to be set to YES. It was NO by default!
Build Settings > Always Embed Swift Standard Libraries
After setting this, clean the project before building again.
For keen readers some explanation
The most important part is:
set the Embedded Content Contains Swift Code (EMBEDDED_CONTENT_CONTAINS_SWIFT) build setting to YES in your app as shown in Figure 2. This build setting, which specifies whether a target's product has embedded content with Swift code, tells Xcode to embed Swift standard libraries in your app when set to YES.
The flag was formerly called Embedded Content Contains Swift Code
Surprisingly enough, all i did was "Clean" my project (shift+cmd+K) and it worked. Did seem to be related to the certificate though.
I started getting this error when I removed:
#executable_path/Frameworks
from Runpath Search Paths in my build settings. Replacing it fixed everything up again (thank goodness for source control!)
I don't know how it got there, but it appears to be needed for a binary to find its embedded Swift runtime.
For the device, you also need to add the dynamic framework to the Embedded binaries section in the General tab of the project.
In Xcode 8 the option for Embedded Content Contains Swift Code option is no longer available.
It has been renamed to "Always Embed Swift Standard Libraries = YES"
Xcode 13 here (13.1 with react-native).
Created a clean react-native project and saw /usr/lib/swift as an entry in Runpath Search Paths.
After adding that, my project finally ran without crashing!
Nothing helped from what was suggested before.
I think it's a bug when certificates are generated directly from Xcode. To resolve (at least in Xcode 6.1 / 6A1052d):
go to the Apple Developer website where certificates are managed: https://developer.apple.com/account/ios/certificate/certificateList.action
select your certificate(s) (which should show "Managed by Xcode" under "Status") and "Revoke" it
follow instructions here to manually generate a new certificate: https://developer.apple.com/library/ios/documentation/IDEs/Conceptual/AppDistributionGuide/MaintainingCertificates/MaintainingCertificates.html#//apple_ref/doc/uid/TP40012582-CH31-SW32
go to Xcode > Preferences > Accounts > [your Apple ID] > double-click your team name > hit refresh button to update certificates and provisioning profiles
I was having this issue with running my Swift tests (but not my app). It turns out that the test needed to have more than #executable_path/Frameworks in it's Runpath Search Paths build setting for the test target. Setting the Runpath Search Paths to the following worked a charm for me:
$(inherited)
#executable_path/Frameworks
#loader_path/Frameworks
OK, sharing here another cause of this error. It took me a few hours to sort this out.
In my case the trust policy of my certificate in Keychain Access was Always Trust, changing it back to defaults solved the problem.
In order to open the certificate settings window double click the certificate in the Keychain Access list of certificates.
This issue occurs again in Xcode 10.2. You must download and install the following package from Apple. It provides Swift 5 Runtime Support for Command Line Tools.
https://support.apple.com/kb/DL1998?locale=en_US
You have to set the Runpath Search Paths to #executable_path/Frameworks as showed in the following screenshot of Build Settings:
If you have any embedded frameworks made in Swift, than you can set to YES the Build Options Embedded Content Contains Swift Code.
I think Apple has already summarized it under Swift app crashes when trying to reference Swift library libswiftCore.dylib
Cited from Technical Q&A QA1886:
Swift app crashes when trying to reference Swift library
libswiftCore.dylib.
Q: What can I do about the libswiftCore.dylib loading error in my
device's console that happens when I try to run my Swift language app?
A: To correct this problem, you will need to sign your app using code
signing certificates with the Subject Organizational Unit (OU) set to
your Team ID. All Enterprise and standard iOS developer certificates
that are created after iOS 8 was released have the new Team ID field
in the proper place to allow Swift language apps to run.
Usually this error appears in the device's console log with a message
similar to one of the following:
[....] [deny-mmap] mapped file has no team identifier and is not a platform binary:
/private/var/mobile/Containers/Bundle/Application/5D8FB2F7-1083-4564-94B2-0CB7DC75C9D1/YourAppNameHere.app/Frameworks/libswiftCore.dylib
Dyld Error Message:
Library not loaded: #rpath/libswiftCore.dylib
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000001, 0x0000000120021088
Triggered by Thread: 0
Referenced from: /private/var/mobile/Containers/Bundle/Application/C3DCD586-2A40-4C7C-AA2B-64EDAE8339E2/TestApp.app/TestApp
Reason: no suitable image found. Did find:
/private/var/mobile/Containers/Bundle/Application/C3DCD586-2A40-4C7C-AA2B-64EDAE8339E2/TestApp.app/Frameworks/libswiftCore.dylib: mmap() error 1 at address=0x1001D8000, size=0x00194000 segment=__TEXT in Segment::map() mapping /private/var/mobile/Containers/Bundle/Application/C3DCD586-2A40-4C7C-AA2B-64EDAE8339E2/TestApp.app/Frameworks/libswiftCore.dylib
Dyld Version: 353.5
The new certificates are needed when building an archive and packaging
your app. Even if you have one of the new certificates, just resigning
an existing swift app archive won’t work. If it was built with a
pre-iOS 8 certificate, you will need to build another archive.
Important: Please use caution if you need to revoke and setup up a new
Enterprise Distribution certificate. If you are an in-house Enterprise
developer you will need to be careful that you do not revoke a
distribution certificate that was used to sign an app any one of your
Enterprise employees is still using as any apps that were signed with
that enterprise distribution certificate will stop working
immediately. The above only applies to Enterprise Distribution
certificates. Development certs are safe to revoke for
enterprise/standard iOS developers.
As the AirSign guys state the problem roots from the missing OU attribute in the subject field of the In-House certificate.
Subject: UID=269J2W3P2L, CN=iPhone Distribution: Company Name, OU=269J2W3P2L, O=Company Name, C=FR
I have an enterprise development certificate, creating a new one solved the issue.
Let's project P is importing custom library L, then you must add L into
P -> Build Phases -> Embed Frameworks -> +. That works for me.
This error message can also be caused when upgrading Xcode (and subsequently to a new version of Swift) and your project uses a framework built/compiled with an older/previous version of Swift.
In this case rebuilding the framework and re-adding it will fix the problem.
The most easy and easy to ignored way : clean and rebuild.
This solved the issue after tried the answers above and did not worked.
I was having the same problem after moving to a new mac, and after hours, trying all the suggested answers in the questions, none of this worked for me.
The solution for me was installing this missing certificate.
http://developer.apple.com/certificationauthority/AppleWWDRCA.cer
Found the answer here.
https://stackoverflow.com/a/14495100/976628
Change Copy Pods Resources for the target from:
"${SRCROOT}/Pods/Target Support Files/Pods-Wishlist/Pods-Wishlist-resources.sh"
to:
"${SRCROOT}/Pods/Target Support Files/Pods-Wishlist/Pods-Wishlist-frameworks.sh"
I solved by deleting the derived data and this time it worked correctly. Tried with Xcode 7.3.1GM
After having tried out everything, I finally found out, that the build seems not always include every detail again and again. Maybe for speeding up the process...
In order to ensure WHOLE packaging before running on a device, make a Clean first: Shift-Cmd-K.
Then build with: Cmd-B.
After that run it on your device.
Easy.
Kind regards to all you nice guys in that place!
In my case, it was just the name of my target :
I renamed it like this : MyApp.something and the same issue appeared.
But I saw in the build Settings window, my product module name has been changed like this MyApp-something.
So, I removed the dot in my target name (MyAppSomething) and the issue was gone.
For me, having tried everything with no success, what worked was to remove #executable_path/Frameworks from the Packaging section (don't know how it came to be in there in the first place)
We had a unity project that creates an xcode project that includes libraries that use swift.
We tried each and every reasonable suggestion on this thread.
Nothing worked. Code runs fine on new devices, and crashes on iOS<=12
It seems that swift is so smart, that even if you set it to "ALWAYS_EMBED_SWIFT_LIBRAIES"="YES" it does not include the swift libraries.
What actually solved the problem for us is to include a dummy swift file in the project.
The file must contain calls to dispatch, foundation libraries.
Apparently this hints mighty-xcode to force include the libraries, but this time for real.
Here is the dummy file we added that made it work:
import Dispatch
import Foundation
class ForceSwiftInclusion {
init() {
// Force dispatch library.
DispatchQueue.main.async {
print("something")
}
// Force foundation library.
let uuid = UUID().uuidString
print("\(uuid)")
}
}
For unity, also add project.AddBuildProperty(target, "SWIFT_VERSION", "Swift 5"); to your post processing for creating the xcode project.
What worked for me in Xcode 11 was going to General -> Frameworks, Libraries, and Embedded Content and changing the "Embed" option for the framework in question to "Embed & Sign"
None of the solutions worked for me. Restarting the phone fixed it. Strange but it worked.
none of these solutions seemed to work but when I changed the permission of the world Wide Developer cert to Use System defaults then it worked. I have included the steps and screenshots in the link below
I would encourage you to log the ticket in apple bug report as mentioned here as Apple really should solve this massive error:
https://stackoverflow.com/a/41401354/559760
I had the same issue for Xcode 13+ when I create a release build. Had to waste my time on troubleshooting this issue. Finally I was able to fix the issue with following step.
I added a new entry for Release in Runpath Search Paths in Build Settings -> Linking.
/usr/lib/swift
After adding that, I could run my app without crashing!
Xcode 7.2, iOS 9.2 on one device, 9.0 on other. Both had the error. No idea what changed that caused it, but the solutions above for the WWDR were correct for me. Install that cert and problem solved.
https://forums.developer.apple.com/message/43547
https://forums.developer.apple.com/message/84846
There are lot's of answers there but might be my answer will help some one.
I am having same issue, My app works fine on Simulator but on Device got crashed as I Lunches app and gives error as above. I have tried all answers and solutions . In My Case , My Project I am having multiple targets .I have created duplicate target B from target A. Target B works fine while target A got crashed. I am using different Image assets for each target. After searching and doing google I have found something which might help to someone.
App stop crashing when I change name of Launch images assets for both apps . e.g Target A Launch Image asset name LaunchImage A . Target B Lunch Image asset name LaunchImage B and assigned properly in General Tab of each target . My Apps works fine.
For me building a MacOS command line Swift app that depended on 3rd party Swift libs (e.g. SQLite) none of the above solutions seemed to work. What did work was directly adding the following path to my Runpath Search Paths in the Build Settings:
/Applications/Xcode.app/Contents//Developer/Toolchains/XcodeDefault.xctoolchain/usr/lib/swift/macosx/
Doing that did give a warning at runtime saying that Xcode had found 2 versions of libswiftCore - which makes sense. Except that not including that line resulted in Xcode not finding any versions of libswiftCore.
Anyway, that'll do for me even if it doesn't seem right - my app is just a utility that I'm not intending to distribute and at least it runs now!
I have multiple version of Xcode installed at the same time. The framework was built with a newer version of Xcode. The app that I tried to compile was with an older version of Xcode. When I cleaned and compiled both the framework and the app with the same version of Xcode then things worked.
I am trying to install MinGW but it's always failing to install. See the picture for the error message.
Error
Welcome to StackOverflow! My name is Alex and I will try my best to fix this problem of yours.
First, do you have a firewall running? Try running it as an Administrator.
If those didn't work, then I believe it's to the sourgeforge or the network itself. This is probably temporary and will be fixed so I suggest you try it later.
Good luck!
Since I cannot comment, I suppose there is no other way than write an answer. I am having the same issue and it seems to be related to the automated installer, it appears to be broken. Try installing manually (download the zip and manually place in correct directories and set system paths).
I installed Visual Studio Code 1.1 with the C/C++ extension,
opened my C++ project and tried to use "Go to definition" in vain.
The "Go to definition" is not working at all.
Example, go to definition of a class member:
int i = m_myVar;
(I opened a simpler project with one file and it was working for this one)
In the end, what I want is good indexation of my big project, is there a way to install Intellisense?
I had a the same issue: F12 and Ctrl + Click and Right Click "Go To Definition" wasn't working.
The fix for me was:
Go to Extensions
Click "Disable All Installed Extensions"
Close and Reopen VS Code
Back to Extensions and "Enable All Extensions"
Essentially enable/disable all extensions fixed the issue.
I recently came across this same issue and after trying all of the suggested solutions I could find with no success, I found this article:
https://code.visualstudio.com/docs/setup/linux#_visual-studio-code-is-unable-to-watch-for-file-changes-in-this-large-workspace-error-enospc
Basically my project grew too large and VS code was no longer able to track all files, which messed up the "go to definition" functionality.
After following the steps on the link to increase the maximum number of files to be tracked, the issue was resolved.
The correction is pretty simple (tested on Ubuntu 18.04):
Add this line:
fs.inotify.max_user_watches=524288
to the end of the file /etc/sysctl.conf
After saving, run the following command:
sudo sysctl -p
Hopefully this will be useful to someone else, this has been bothering me for the last few days.
I had a similar problem except with Python and google searches for solutions kept bringing me back to this post so I figured I'd post my solution here in the hopes that it might help other people.
I was working on a remote cluster through VScode Remote and was getting similar errors to the original question(all 'go to ___' functionality was unavailable and was even getting a 'too large to track' error) and I thought I had to increase the number of watches, which didn't end up helping.
All I needed to do was install a python interpreter on the remote VScode server. This fixed my problem.
I believe vscode 1.1 (well, 1.1.1 actually) + the C++ extension (cpptools) is as much Intellisense as we can get for now.
You should load your big project with the "open folder" function to make vscode know about the other files.
https://blogs.msdn.microsoft.com/vcblog/2016/03/31/cc-extension-for-visual-studio-code/ warns about letting the indexing finish first (red icon in lower right corner during indexing) and mentions the current limitations on the source code parsing.
It wasn't working on my laptop as well after installing a few VSCode extensions. I decided to close and re-open VSCode with administrator permission and suddenly it sorted out.
I have been trying to fix this for a long time. In the end, what worked for me was simply reinstalling VSCode, then installing the latest C/C++ extension (v0.18.1). Then, in your .vscode/c_cpp_properties.json file, under includePath, add your include folder which has all your header files.
I tried the methods mentioned in this thread none of them seemed to work for me. A simple solution that worked for me is that I closed the current workspace and created a new workspace, added the folders which I required(same as the old workspace), and saved the new workspace. Waited for a couple of minutes to index and IntelliSense is able to find definitions now.
I am using VSCode 1.52.1 on Ubuntu 20.04.
In my case, for whatever reason,c_cpp_properties.json has become set to Disabled in ~/.config/Code/User/settings.json.
Manually changing it to Enabled solved the problem.
Fixed mine by UNCHECKING C_Cpp > Default > Limit Symbols To Included Headers
Your mileage may vary. Good luck!
Have you saved your workspace? Or did you just open a folder with File->Open Folder? This question already has many answers, but none of them address this case, which was my issue.
The question is not specific enough for me to know if you are having the exact same symptoms as my case.
If:
You have not saved your workspace. vscode doesn't say "(workspace)" at the top of the window.
None of the goto functions are working, but instead report: "No ___ found for ____"
The tag parser database icon in the bottom right is always there but only reports "Parsing open files", rather than telling you how many files have been parsed.
Then:
Try saving your workspace.
If you have multiple versions of a language on your PC, specify the exact language you are using in the VScode(in my case, I am using Python, so I must specify the version to the python Interpreter in VS Code)
If you could not do it whatsoever, then uninstall all the other versions that you don't use and then if you go to VS Code, it will ask the version to be used, and you would have only one version, so when you select the version, the "Go To Definition" will be activated.
I was having a similar issue with java on Ubuntu 20.04 using OpenJDK version 11 (openjdk-11-jdk in apt). At first I didn't have the JRE installed, so I installed it and it still didn't work.
Afterwards, I went to the CTRL + SHIFT + P menu and then to Java: Configure Java Runtime, there I saw in the Java Tooling Runtime tab that /usr/lib/jvm/java-11-openjdk-amd64 was selected, changed it to /usr/lib/jvm/java-1.11.0-openjdk-amd64 just to see if it would work, and after a restart it did. I'm not sure why this is, but I hope it may help somone else.
For python ensure your code analysis settings are correct. In my case the languageServer was accidentally set to 'None'. Reverting it to 'default' or 'pylance' did the trick.
Just to inform if none of above works then
In my case i was using Kite extension in my VS code, I just disabled it and it worked. I think kite extension is blocking this feature.
OS: Linux Ubuntu 22.04
if you encountered with following error:
"The .NET Core SDK cannot be located. .NET Core debugging will not be enabled. Make sure the .NET Core SDK is installed and is on the path."
Normally Vscode remains unable to locate .Net sdk. need to set path manually.
sudo ln -s /snap/dotnet-sdk/current/dotnet /usr/local/bin/dotnet
restart omnisharp & restart vscode
No need to do anything. Just close and re-open. It will work.
I also faced similar problem. In my mac os cmnd + 'click' is used to 'go to definition' then it suddenly stoped working. If that is the case then please follow these steps:
restart vs code
restart pc
uninstall all extensions and reinstall again followed by a pc restart.
I had a similar issue with the extension C/C++ installed. I solved it by downloading an older version of the extension and upgrading to the last version. Somehow it solved the problem...
I have been following the tutorial found here for a SpecFlow test report generator.
My issue is, when I run the tool, I receive the following message:
The attribute "Label" in element Target is unrecognized
I've found a few possible solutions, none of which have worked e.g. here
I am able to show that I am running version 4.x as when I run MSBuild using the Visual Studio 2012, command prompt I can see the following:
Microsoft (R) Build Engine version 4.0.30319.17929 [Microsoft .NET
Framework, version 4.0.30319.18052]
I have created a config file as suggested here
but unfortunately I am still getting the error. The project is running locally off git and this issue has been fixed in the past by using the config file, however since swapping to a VMware Virtual machine, it is now occurring again.
I have also right clicked > Properties which states that the file is using .NET 4.0, in addition created a Environment Variable linking directly to the MSBuild directory. I've spent a good while browsing the internet and cannot get this working. Please help!
Many thanks for any help you can provide,
Cheers!
Solved this with the internal devs. There was some problem with the Chromedriver update script which had been added by (I'm assuming NuGet)
Starting
<PropertyGroup Label="DownloadChromeDriverBuildTask">
and also:
<Target Name="DownloadChromeDriver" Label="DownloadChromeDriverBuildTask">
It was a small script that was installing ChromeDriver if it was not already available. Removing this seems to have resolved it. Hope this provides help to anyone with a similar issue.