I want to make an interface that looks like this
So here is what the user can do
1- Connect people to each other
2- See some information about each person (the balloon)
3- Move these objects around without them loosing their connections
Then I want to save these connection information using ajax, so that I can see who is connected to who, I also need to redraw these diagrams next time the user sees the page.
It seems like jsPlumb, paperjs, and raphael can all do this and a lot more, my question is which one is suitable for this need.
inspect graphiti which is based on raphael.
http://www.draw2d.org/graphiti/jsdoc/#!/example
Greetings
Andreas
Related
I am new to Django and want to know deeper about the concept of signals.
I know how it works but really don't understand when should one really use it.
From the doc it says 'They’re especially useful when many pieces of code may be interested in the same events.'
What are some real applications that use signals for its advantage?
e.x. I'm trying to make a phone verification after user signup. Because it can be integrated inside the single app and the event that interested for the signal is only this 'verify' function, therefore I don't really need signal. I can just pass the information from one view to the other, rather than using pre_save signal from the registration.
I'm sorry if my question is kind of basic. But I really want to know some insight what is the real application, in which many codes interested in one particular event and what are some trade off in my application.
Thanks!!
Often signals is used when you need to do some database-specific low-level stuff. For example, if you use ElasticSearch for better searching documents on your site, you may want to automatically update search indexes, when new document is created or old one was edited.
Also you may have some complex logic of managing database objects. For example, you may need some specific logic of deleting object. For example, when user is deleted, you may want change all the links to his profile by some placeholder, or when new message is created or other action is performed by user, you want to update "last visited" field in user's profile and there's no direct relation between this action and updating the profile.
But when you're just implementing business-logic as in your example with verification, you don't need to use signals, because you don't need any universal logic related to deleting/creating/editing any object: you have a certain object with which you work and can do stuff directly.
I'm building a magento (1.9CE) store which needs to interface with another system and I could use some guidance.
Although not particularly relevant, I'm communicating with the 'other' system using web services (it's on another server) but what I need help with is finding the places where I need to put in code to do what I want.
There are three major functions that I need to implement:-
When a user clicks on the product detail page I need to make a call to check the stock levels on the other system, update the magento stock levels and THEN display the product detail page.
When a sale is completed, I need to send details of that sale to the other system.
When a new product is added I need to communicate with the other system. This may be a bit more complex because there are a few checks I need to do during the 'add product' process, for example, check the SKU is valid, that tghe product doesn't already exists, etc. I think until I start coding this I shan't realise the full extent of this functionality!
Any guidance gratefully received!
Even though this might (and probably will) dramatically slow down your store, if you want real-time information, I guess the easiest way would be with observers.
You can use catalog_controller_product_init_before: This will trigger when the product detail page is starting loading, so you should be able to upload the stock at this point, before the page has finished loading, so that if there is no stock it will not be buyable, which I guess that's what you want.
You can use sales_order_place_after: This will be triggered after a new order has been placed and saved in the database.
You can use catalog_product_new_action or catalog_product_save_after: Depending on how you create your products the first one might not be triggered. The second one will always be triggered once a product (new or existing) has been saved, so at this point you will need to check if the product is new or existing, and do your stuff depending on that.
For an example of how to create an extension and usage of observer events, check this out.
I hope it helps!
For school we are creating a roulette webapplication in Clojure with the webnoir framework. Everything seems realizable in Clojure, but the problem is: how do we define the board in our domain in Clojure? It must be possible to place corner bets etc.
And if we modelled this in our domain how do we send the information of the view to our domain/board?
Does anyone has ideas or suggestions?
Since there are infinite ways to define a board, many of them good, I'll avoid that question and primarily address the second: communicating between your board view and model.
One solution using webnoir is to have your board view contain form[s] to perform actions. Submitting that form updates your board model and redirects to the same route, resulting in an updated view. I'm sure you've been leafing through Chris Granger's excellent documentation.
Another route, albeit one that might be outside the scope of your project, is to have client side code dynamically communicate with the model and update your view, the end result being a single page webapp. This could be done with ClojureScript. If you are considering this, take a look at Chris Granger's libraries formerly known as pinot. They provide a wonderful complement to webnoir.
I am blocking a huge number of bots, except the ones from search engines, and then only allowing 2seconds of session management.
However, spam bots are still able to by-pass these measure and create a huge number of requests which is 'killing' the server.
I have read other articles on this site but none seem to directly answer this issue.
A bot probably behaves faster than a human. You could time how long it takes them to fill out the form. Anything less than a second or two is a bot.
A bot probably doesn't have JavaScript turned on. You could use that to your advantage.
You could hide a link via css (or not give it any text) that takes the bot to a bot.cfm page, which could then set a session value.
There are some open source projects but I can't remember the names of them off the top of my head.
CF10 has a new validation function.
Ben Nadel has written some useful posts in his blog regarding spiders/bots.
http://www.bennadel.com/blog/1083-ColdFusion-Session-Management-And-Spiders-Bots.htm
http://www.bennadel.com/blog/154-ColdFusion-Session-Management-Revisited-User-vs-Spider-III.htm
For forms, I use <cfimage> to create a captcha image. I have found that stuffing the captcha phrase in a session variable can cause problems (I can't remember what the problems were though). So, I now use <cfencrypt> to include an encrypted phrase in the form itself. The action page decrypts the phrase and compares it to what the user put in the captcha form field.
I've found CFSPAMProtect to be very useful at blocking automated form fillers.
It bases its SPAM/HAM test on an aggregate score of a number metrics including time on page, mouse movement (via JS) as well as the classic hidden form fields that shouldn't be filled in (but are filled in by dumb robots).
You can assign your own weightings and monitor the SPAM catch via email to allow you to tailor things.
It can work on its own or link to some third party SPAM tools such as Akismet.
So far I've found that it's good enough on it's own.
It's a custom tag and easy to implement in existing forms too which is nice.
Give it a go...
I am running ColdFusion MX, so I don't have the possibility of using the built-in cfimage Captcha functionality in my application, before form submitting.
But the problem is without captcha the bots submit the forms.
What will be best way to prevent automatic submitting?
Captchas don't have to be images!
Try one of the following solutions:
Most bots don't understand CSS. Create two submit buttons, the first with a value that will be rejected by the server, the second with a value that will be accepted by the server. Hide the first one using CSS.
Ask the user to answer a simple math problem. This will require you to create the math problem and store the expected solution somewhere (like the user's session), then compare the user's submitted answer with the stored answer. For extra protection, you can create simple addition, subtraction and multiplication questions. Avoid division, remainders are a pain for some users.
Bots read the names of form elements, and tend to ignore text labels. Try creating a checkbox named "optout" (like a newsletter), checked by default. Next to the checkbox, ask the user to uncheck the checkbox if they are a human. The opposite technique also works (unchecked checkbox that you ask the user to check).
All of these solutions can be done without third party code or API calls.
That being said, reCAPTCHA is pretty good and easy to integrate into almost any environment.
Take a look at cfformprotect - it will work with CFMX 6 and all later engines.
It aims to be fully accessible - and invisible to most users - with an assortment of methods to stop bots and spammers.
Also you might want to look at a CF wrapper for reCaptcha, which is compatible with CFMX 7.
A technique I used with a different technology was to use image buttons. Your POST handler gets the x,y co-ordinates where the images were clicked. I found the bots (which are just generating post requests) were passing 0,0 and by dropping those requests on the floor I brought the spam posts down to less than the real ones. Sorry that I don't know how to do that in CF but I hope the technique is useful to you.
Its always a good idea to do data validation on the server side before processing no matter which solution you use.
This post may help: http://www.bennadel.com/blog/405-Fully-Accessible-Spam-Form-Submission-Blocking-Using-ColdFusion-And-X-HTML-Version-III-.htm
How about using calculation method? Just like 8 + 5 = ?
OR
how about using ColdFusion.Ajax.submitForm?