G'day
Is there a way to force the mail spooler to run, rather than wait for the delay period set in CFAdmin?
I had a look through the admin API and could not see anything, so I suspect the answer might be "no", but I thought perhaps someone knows how to call the underlying process?
The reason for wanting to do this is a bit of an edge case. On our testing server we've got the spooler set to run every 15sec, which - for most things - is fine. However we have an increasing number of unit tests (which run on this same test server) which inspect the content of email messages that have been sent for various elements we need to verify the integrity of. Currently the tests check the Undelivr dir and if the relevant mail message is not found, waits 2sec and tries again, waiting for a total of 20sec before deciding the test needs to be aborted (20sec is an arbitrary amount; 15sec between spool intervals, and some "wriggle room"). This works fine, but it means the unit test suite ends up running slower than it really needs to be, because these email-checking tests have this "up to 20sec" pause in them.
It's not the end of the world, but it's something I'd like to deal with if poss.
I guess one approach I could take is to check the spool dir instead, but I'd rather wait until the email message is "parked" in the Undelivr dir if poss. I'm slightly hesitant to mess with stuff in the spool dir (for no informed reason, granted).
Anyway, all my waffle aside, the short version of the question is "is there any way to force mail spool to run via code?".
Cheers.
<cfobject action="CREATE"
type="JAVA"
class="coldfusion.server.ServiceFactory"
name="factory">
<cfset MailSpoolService = factory.getMailSpoolService()>
<cfset MailSpoolService.restart()>
OK, I've got the official line from one of the Adobe engineers on this: basically what I'm trying to do can't be done, as it currently stands.
There's a method to re-run the email spool, but it's private to the mail spool service.
Oh well.
Cheers to everyone who looked into this for me & offered suggestions.
There's a method to re-run the email spool, but it's private to the
mail spool service.
As I mentioned in the comments, you can invoke a private method by setting its accessibility to true. Not something you want to do "willy-nilly", but probably okay for a unit test.
Disclaimer: I would not swear these are the right methods. But it did seem to kick-off mail processing in my brief tests.
<cfscript>
// Tested with CF 9.0.1
factory = createObject("java", "coldfusion.server.ServiceFactory");
spoolService = factory.getMailSpoolService();
spoolClass = spoolService.getClass();
methodToCall = spoolClass.getDeclaredMethod("refreshSpoolFiles", []);
methodToCall.setAccessible(true);
methodToCall.invoke(spoolService, []);
methodToCall = spoolClass.getDeclaredMethod("deliverStandard", []);
methodToCall.setAccessible(true);
methodToCall.invoke(spoolService, []);
</cfscript>
Related
I'm working on a project in C++ to backup and restore email on Microsoft Exchange servers, I'm trying to write automated tests for the restore function. Right now I can create test users, databases, and mailboxes, and can send email between users through the Exchange Admin Powershell. However, Exchange doesn't have commandlets to view or delete emails (as far as I can tell). Is there a way to do that with straight Exchange commandlets?
I haven't found a way, so instead I'm looking for an IMAP API that I can add to the project to enable viewing and deleting emails. Free would be ideal, but it can't be licensed with GPL. Is there an IMAP API for C++ that doesn't have GPL? Is there an avenue to programatically view and delete emails I haven't tried yet?
EDIT: Honestly I'm not too fussy on how it gets done, I just need a way to do it. I'm open to any suggestions.
https://technet.microsoft.com/en-us/library/ff459253(v=exchg.150).aspx
Search-Mailbox can delete messages.
https://technet.microsoft.com/en-us/library/ee633455(v=exchg.150).aspx
ExportMailboxRequest and ImportMailboxRequest cmdlets do most of the heavy lifting for importing and exporting data.
Why do you need to read messages? Powershell can also do client side scripts using Outlook library commands.
EDIT
Put a 'magic phrase' in your test email. "MagicRainbowUnicorn".
Delete a message
Search-Mailbox -Identity "TestMailbox" -SearchQuery 'MagicRainbowUnicorn' -DeleteContent
Test for message
Switch ((Search-Mailbox -Identity "TestMailbox" -SearchQuery 'MagicRainbowUnicorn').count) {
0 { "No Results Found" }
1 { "One Result" }
default { "More than One, or some other strange Result" }
}
I don't have enough reputation to comment, but could you consume Exchange Web Services with C++? I wrote a few programs in C# that use EWS for monitoring mailboxes. I had the ability to view and delete messages from Exchange.
[Edit]
This is a sample of what I used in C#, if you decide to use that instead of C++. Or maybe it'll help steer you in a good direction.
using Microsoft.Exchange.WebServices.Data;
ExchangeService svc = new ExchangeService(ExchangeVersion.Exchange2010);
svc.Credentials = new WebCredentials("user#domain.com", "password");
svc.AutodiscoverUrl("user#domain.com");
// loop through messages in Inbox
foreach (EmailMessage msg in svc.FindItems(WellKnownFolderName.Inbox, new ItemView(int.MaxValue)))
{
// do stuff with message
}
I have a script :
<cfscript>
gf = createObject('component','com.general');
gf.checkIpBlocked();
</cfscript>
that I want to fire onSessionStart.
I added an onSessionStart to /siteID/includes/themes/myTheme/eventHandler.cfc. But the session start NEVER fires. I know there is something managing sessions because of I open the admin, login then close the browser, re-open it I am forced to login again.
If I set a session variable close the browser and and the session.testVar never goes away and seems to hold the initial value for a very long time.
I am not trying to manage mura users or anything I am just trying to set a session variable the first time in a "session". In a typical application.cfc this is easy.
Any insight is appreciated.
Unfortunately, that's a bug. However, one thing to keep in mind is that onSiteSessionStart is unreliable since it only fires when a siteID is defined within the request. For example, if you were to go to the admin and be asked to login your session will have started and there would have been no siteID.
For now I would try using onSiteRequestStart to param the variable instead.
function onSiteRequestStart($){
param name="session.ipChecked" default=false;
if(!session.ipChecked){
var gf = createObject('component','com.general');
gf.checkIpBlocked();
session.ipChecked=true;
}
}
In regard to our documentation we have three Mura 6 books available both printed and digital downloads from Lulu
And are also working to create a systematic way to post the contents of those books on our support site which we are hoping to complete by MuraCon on 9/30. So that the all of our documentation will stay update and in sync.
The Mura docs state that the application events are actually onGlobalSessionStart and/or onSiteSessionStart.
Application Events
onApplicationLoad onSiteSessionStart
onGlobalSessionStart onSiteSessionEnd
onSiteMissingTemplate onSiteError
onGlobalError onBeforeAutoUpdate
onAfterAutoUpdate onGlobalThreatDetect
Note that Events that begin with onGlobal are deļ¬ned on a per-Mura
instance basis.
Mura docs.
We have a set of Coldfusion applications that all extended various parts of an application base. I'll provide a bit of code and then explain the issues we are having and see if anyone can shed light on the best way to trouble shoot this:
In our "OnRequestStart" in the app.cfc we have the following line to initiate a user:
if(!structKeyExists(SESSION, 'user'))
SESSION.user = CreateObject("component","cfcs.ds_user");
Then in the ds_user.cfc we call it like so:
component extends="cas.cas_user" displayname="basic_user"{
The application and all its parts run just like they should. However, in a seeming random manner after a while, the application will crash and I have to restart ColdFusion Service to get it running again. The error I get is:
Could not find the ColdFusion component or interface cas.cas_user.
So, for whatever reason after a while, my application decides it cannot find the path to the parent component. The mapping for that cfc is in the application.cfc at the top as so:
THIS.mappings["/cas"] = "#ReplaceNoCase(currpath,ListToArray(THIS.name,'_')[1],'cas30')#assets\cfcs\";
I want to be sure to say this, the application works perfectly as designed for a random amount of time and then it cannot find the parent component and will not find it again until I restart the ColdFusion Service on the server.
I figure this is somehow a memory leak or something, but I have no idea where to start looking to troubleshoot the issue. We have 6 or so other applications that are extended in the same way and work fine and never crash, but this one does.
EDIT: To be more clear on the mappings. Our applications are located:
root.com/app1
root.com/app2
We created mappings to grab cfcs from app2 while in app1 using the method above. The method, while I believe sort of strange, does work in all of our applications.
EDIT: The correct mappings that display for a while are:
/cfcs - D:\www\app1\assets\cfcs
/templates - D:\www\app1\assets\templates
/cas - D:\www\app2\assets\cfcs
/common - D:\www\app3\assets\common_elements
However once the Application goes in "crashed mode", the dump reveals the mappings are as follows:
/cfcs - D:\www\app1\assets\cfcs
/templates - D:\www\app1\assets\templates
/cas - D:\www\app1\assets\cfcs
/common - D:\www\app1\assets\common_elements
And here is how those mappings are defined at the start of the Application.cfc:
currpath = GetDirectoryFromPath(GetCurrentTemplatePath());
THIS.mappings["/templates"] = "#currpath#assets\templates";
THIS.mappings["/cfcs"] = "#currpath#assets\cfcs";
THIS.mappings["/common"] = "#ReplaceNoCase(currpath,ListToArray(THIS.name,'_')[1],'gum')#assets\common_elements\";
THIS.mappings["/cas"] = "#ReplaceNoCase(currpath,ListToArray(THIS.name,'_')[1],'cas30')#assets\cfcs\";
THIS.name = digisign_CAAAFACBFDFFE or
name_var = (arrayLen(meta_array) >= 2) ? meta_array[arrayLen(meta_array) - 1] & '_' : 'root_';
THIS.name = name_var & right(reReplace(hash(getCurrentTemplatePath()), "[^a-zA-Z]","","all"), 64 - len(name_var));
Where could it be failing. It seems the replace statement isn't working and therefore the appname in the path is not being changed from app1 to app2 when setting the mappings. is it possible this is related to this error we are currently working through: http://forums.adobe.com/message/4657868#4657868 We have yet to apply the Update 4 patch on production. However this problem we believe was happening before CF10. And while we have this issue, it only cropped up recently. This application in question has been crashing like this for a long time.
EDIT:
1. I guess when I say "crash" I mean the application gets into a state, where it will not declare the mappings correctly until I restart Coldfusion. I assume the error in our code causes the crash.
2.This is usually where the issue occurs, when doing this check of the SESSION.user var. I believe it has happened as well, it decides it cannot find our datasource. This is rare.
3. At first I thought yes, but actually no, not that many. Throughout our apps we have several names for common mappings. cas common cfcs templates etc. However D:\www\cas is where the application domain.com/cas30 is located. However a legacy version of that app is located at domain.com/cas. The mapping /cas should go to D:\www\cas30\assets\cfcs and works.
4.We have a dev setup and this never happens. (I assumed it was a load issue which is why it doesn't happen on dev). However, our dev environment is structred as so:
D:\www\deva\app1
D:\www\deva\app2
D:\www\devb\app1
D:\www\devb\app2
What we do (which I think is stupid) is we have a file located not in the same dir as the current app. This file is called application_base.cfc. All of the application.cfcs in the other applications extend from this application_base.cfc. They are not extended from other Application.cfc files. (hope that makes sense) In application_base is a init, onrequeststart, and an onerror. I'll post the App.cfc below. Also some setting are read from XML files both in the application base (to determine environment stuff) and at the application level. However we thought that might be causing the issue so the previous developer removed the xml file at the application level.
6.Yes. I'll post the app.cfc and the appbase.cfc so you can view both.
By reinitialize you mean call onapplicationstart or something. Not that I know of.
A few applications we have do:
currpath = GetDirectoryFromPath(GetCurrentTemplatePath());
app_path = ListToArray(currpath,'\');
THIS.name = app_path[ArrayLen(app_path)];
This one does:
meta_array = ListToArray(GetMetaData(this).name,'.');
name_var = (arrayLen(meta_array) >= 2) ? meta_array[arrayLen(meta_array) - 1] & '_' : 'root_';
THIS.name = name_var & right(reReplace(hash(getCurrentTemplatePath()), "[^a-zA-Z]","","all"), 64 - len(name_var));
A few others do this as well. Not sure if it was two different developers or something, but that is the way it is.
Once the app fails, it fails until I restart coldfusion. The app requires login from the domain.com/app page, so (not saying it cant change from request to request) but the request location is always the same where it's failing.
God I wish it wasn't this complex. I recently pulled our current CMS off of alot of this crazy stuff, but we have 7 or 8 applications that are so intertwined with each other and designed to work in dev/prod environments with different paths, its sometimes hard to tell what I can remove and what I can't.
I thought I tried dumping the applicationname from our error handler, but I thought it didn't work unless passed in. I passed through the mappings so I could see them which is how I know digisign is not changing to cas30 like it should in "crash" mode.
I think all the dynamic mappings were so the original developer could just use the same app.cfc template without changing anything. He liked to do stuff like var a = (b) ? (a-c) ? a-f+b : (a+b) ? d : d; : a; h; crap with no comments so it sometimes hard to just read the damn code let alone debug it.
EDIT
I feel like this issue and stackoverflow.com/q/14300915/1229594 issue may be related. I've posted some more details here as well: forums.adobe.com/message/5022377#5022377
First things first: why are you initialising session-oriented stuff in onREQUESTStart()? If you inited that in onSessionStart(), you'd not need to check for its existence every request, which - whilst trivial - is unnecessary overhead, and is simply the wrong code in the wrong place.
Secondly... you quote your error, but don't say where it's happening. Is it happening in that line in onRequestStart()?
If so, do me a favour: put a try/catch around it, and within that write the value of this.mappings to a log file, as well as the value of currPath. How is the value of that variable being derived, btw?
That said, I think if you just put that session.user init code in the right place, it'll solve your problem.
NB: frame this problem as almost certainly not a memory leak (ie: ColdFusion's fault), but your code doing something you did not anticipate (so... err... your fault ;-). This will help focus better on finding the problem. I'm not having a go at you, but "where is my code wrong" is a better approach than "it's probably something else". And more likely to be correct ;-)
Oh... and what version of CF are you on?
Take a look at this and see if it's relevant to your problem.
https://github.com/Mach-II/Mach-II-Framework/wiki/Application-Specific-Mapping-Workaround
If not, then it could have something to do with application specific mappings of the same name, on the same CF server, with those applications having different application names.
Some questions:
Are you assuming the crash is being caused by the code error, or that the code error is occurring because of the crash?
Is the instantiation of the session user the only line of code that you see these path errors?
Do you have any physical directories in your app that have the same name as the mapping names?
Does this occur in any other environments (dev/test)? Is this a clustered environment?
Are there multiple Application.cfc files extending this same Application.cfc?
Is there any code that is directly calling Application.cfc methods?
Are there any bits of code that cause the application to reinitialize itself?
What is determining the meta_array that is being used to derive the application name?
A few observations:
It seems to me that the application name is getting changed or that some other application is overwriting with the same name. This doesn't seem far-fetched as there's an awful lot of dynamic naming going on here. Starting with the application name, it's dependent on the current template's physical location, which could be different from request to request, depending on how the app routes requests. If the current template varies, the application name will vary, and cause the other app-specific mappings to change, which would cause a cascading effect to all the other mappings that use the app name to determine the physical location of those mappings.
Which begs the question: Why is all this dynamic evaluation of the application name and mapping locations even necessary? Can it be simplified or hard-coded? Can you instead use a server mapping? If it doesn't have to be this complex, simplifying it to its barest essentials will help troubleshooting and may clear up the issue entirely.
Finally, can you verify that the application name during normal operation is the same application name being referenced when the errors are occurring?
If they are different, then something is causing the application to execute within a different context (see my initial questions above for clues). A sudden change in the application name would invalidate any existing sessions and force the session user instantiation code to re-run. And because the user component paths are based in part on the application name, the paths may no longer be correct.
But if the application names are the same between normal operation and crash mode, then most likely the currpath variable is being affected by some part of the application being executed in a different physical path than expected. Since currpath is directly used in determining the rest of the mappings, that could certainly explain why an unexpected path could cause the component to go missing.
Because there are so many variables going into deriving these names, you would be well served to log those variables during normal operation and during crash mode. You'll want to see
GetCurrentTemplatePath()
GetDirectoryFromPath(GetCurrentTemplatePath())
THIS.name
meta_array
THIS.mappings
I suspect you'll find something significantly different in these variables when operating normally and when the crash/errors are occurring, and that difference should lead you closer to the answer.
My question seems to be related to this one:
Coldfusion memcached connections
however, i have been unable to solve it.
if i put this code in application.cfm:
<cfif not IsDefined("application.memcached")>
<cfset application.memcachedFactory = createObject("component","memcachedFactory").init("192.168.2.91:11211")>
<cfset application.memcached = application.memcachedFactory.getmemcached()>
</cfif>
the page will work for maybe 270 calls. then it will start to fail with an error "Object Instantiation Exception " The code is properly talking to memcached. I can send and receive data. it seems like java is running out of something .. threads, sockets, handles of some sort. I know little about java, and am stuck.
This seems wrong to me Don. Why would this code run again after the very first call? It should be running 1 time after which you have a reference to your object. What does the rest of your application.cfm look like? Have you added a cfapplication tag with a "name"?
If you fail to set an application "name" (via the cfapplication tag or "this.name" in application.cfc), the an "application.x" variable is treated just like a regular variable. After the page request ends it will "go away" and require the next request to reinstantiate the object over again.
The purpose of the "isDefined()" in this case is to insure it runs only once - providing you with a singleton (single reference) you can use again and again without reinstantiating it. It sounds like you are not "inside" an application.
I'm running CF 9.0.1 Developer and Coldbox 3.0.0 on my local machine (64-bit Windows Vista running 32-bit CF9 on Apache). I'm working on an application that I've checked out from SVN and deployed locally. Everything seems to be working correctly, but my application log is filling up with entries like this:
Apr 18, 2011 12:41 PM Error jrpp-7
exception.log has an extremely long stack trace for each exception, maybe 150 lines or so. It starts with this:
"Error","jrpp-4","04/18/11","11:07:30",,""
java.lang.NullPointerException
at coldfusion.util.Utils.getServletPath(Utils.java:86)
at coldfusion.util.Utils.getServletPath(Utils.java:76)
at coldfusion.util.Utils.getBaseTemplatePath(Utils.java:405)
at coldfusion.runtime.TemplateProxyFactory.getTemplateFileHelper
(TemplateProxyFactory.java:1522)
at coldfusion.runtime.MetadataUtils.getComponentMetadata
(MetadataUtils.java:112)
at coldfusion.runtime.CfJspPage.GetComponentMetaData(CfJspPage.java:2667)
at coldfusion.runtime.TemplateProxy.getRuntimeComponentMetadata
(TemplateProxy.java:1756)
at coldfusion.runtime.TemplateProxy.getRuntimeMetadata
(TemplateProxy.java:1617)
at coldfusion.runtime.MetadataUtils.getMetaData(MetadataUtils.java:54)
at coldfusion.runtime.CfJspPage.GetMetaData(CfJspPage.java:2640)
at cfEventHandler2ecfc862260423$funcPOSTLOAD.runFunction
(C:\ColdFusion9\wwwroot\ybocv5\coldbox\system\orm\hibernate
\EventHandler.cfc:30)
This is a version of an app that has been running in production, and what makes me think this is just on my local version is the appearance of this in the stack trace:
at cfdump2ecfm471394032$funcRENDEROUTPUT.runFunction
(E:\cf9_updates_rc\cfusion\wwwroot\WEB-INF\cftags\dump.cfm:704)
...
at cfCollectionPanel2ecfm961210602.runPage
(C:\ColdFusion9\wwwroot\ybocv5\coldbox\system\includes
\panels\CollectionPanel.cfm:40)
We don't use cfdump in production; this looks like ColdBox is trying to display a complex object in a debugger panel and failing.
The only thing I found online so far was this thread in Google's transfer-dev group ... someone who saw a bunch of similar errors and thought maybe it was a CF9 bug. The only reply with any sort of solution was this one, suggesting a fix that seems to be Transfer-specific.
Does anyone know what might be causing these errors? It's not as important to me to fix them as it would be on a production app, but if I'm spamming my logs with these errors, it's hard to find legitimate errors when they do occur.
Update: I've been working with the CollectionPanel.cfm template to identify the root cause, and the exception is consistently thrown here:
<cfelseif isObject(varVal)>
<!--- this cfdump is the guilty party ... --->
<cfdump var="#varVal#" expand="false" top="2">
<cfelse>
I've tried wrapping the cfdump in a try-catch, but the exception is thrown anyway, always from that same line of code. This makes sense, I guess, given that these errors don't have any visible effect on the pages on which they occur.
It appears to not be caused from a <cfdump> instead from a GetMetaData() call.
Specifically when you get the meta data of a cfc, which extends another cfc which has been modified after the current has been compiled (and where GetMetaData has been run) where it needs to update the extends struct in the GetMetaData() return. Cf only generates the meta data struct once, most likely for performance reasons.
I think it might be a bug in cf...
Inside the TemplateProxyFactory.getTemplateFileHelper() it's calling runtime.resolveTemplatePath(compName + ".cfc") where compName is name.replace('.', '/')
All good and well until you use a mapping. If you straight out replace dots with slashes, you'll need to add a leading slash, just like they do in TemplateProxy.getMetaData()
Without the leading slash, resolveTemplatePath() returns null, which triggers the VFSFileFactory.getFileObject() call which tries to get a File object from the parent cfc name.
Before it even gets to the VFSFileFactory, it calls Util.getBaseTemplatePath() with the pageContext. Inside it gets the ServletContext from the pageContext and tries to call getServletPath() so that it can get its real path. Utils.getServletPath() tries to get the attribute "javax.servlet.include.servlet_path" which on my machine (and probably yours) doesn't exist and returns null.
You can check by calling this: isNull(getPageContext().getRequest().getRequest().getAttribute("javax.servlet.include.servlet_path")); - yes, there is supposed to be two .getRequest() calls in there.
So it seems Cf is trying to refresh it's extends struct in a cfc getMetaData() call when the extended file is modified and does it a different way then when it first generated the struct.
In you cf admin, what are you settings under Server Settings > Caching?
Trusted cache? Cache template in request? Component cache? Save class files? Cache web server paths?