Can someone please tell me how can i test my web page in FireUnit?
http://ejohn.org/blog/fireunit/
I just played around with it last week and wrote a few test cases. You'll want to create a test case file and include it as part of your page. (perhaps use a conditional like "debug=true" to
prevent inclusion during production)
I found the .Compare method to be the most useful. You can write stuff like:
fireunit.compare(
"expected result",
callToFunction2(), // tested
"This is the test name"
);
Note that since you are comparing strings here, if you want to do JSON instead, you'll have to JSON.stringify the output first.
Upon running the page with the included js file, you'll see test results under the "Test" panel of firebug. (assuming you have the extension installed)
Related
I have a suite which has 50 test cases. When I execute my suite, I get all the failed screenshots listed in the project's folder. I want to point and store those screenshots to a different directory with the name of the test case. I wanted it to be a one time setup than doing it explicitly for every test cases.
There's quite a few ways to change the screenshots default directory.
One way is to set the screenshot_root_directory argument when importing Selenium2Library. See the importing section of Selenium2Library's documentation, and importing libraries in the user guide.
Another way is to use the Set Screenshot Directory keyword, which will do pretty much the same thing as specifying a path when importing the library. Though, using this keyword you can set the path to a new one whenever you like. For example, you could make it so that each test case could have it's own screenshot directory using this keyword. According to your question, this may be the best solution.
And finally, you may also post-process screenshots using an external tool, or even a listener, that would move all screenshots to another directory. Previously mentioned solutions are in most cases much better, but you still may want to do this in some cases, where say, the directory where you want screenshots to be saved would be created only after the tests have finished executing.
I suggest you to do the follow:
For new directory, you should put the following immediately after where you open a browser such:
Open Browser ${URL} chrome
Set screenshot directory ${OUTPUT FILE}${/}..${/}${TEST_NAME}${/}
For replace the screenshot name from the default to your own name, create the following keyword:
sc
Capture page screenshot filename=${SUITE_NAME}-{index}.png
Then, create another keyword and run it on Setup's test case:
Register Keyword To Run On Failure sc
In the above example, I created a new folder with the test case name, which create a screenshot (in case of failure) with the name of suite project name (instead of 'selenium-screenshot-1.png').
I've found several ways to automate folder comparison using scripts in Beyond Compare, but none that produce the pretty html report created from Session>Folder Compare Report>View in browser.
Here is an example of what that looks like.
I would love to be able to find the script that gives me that html difference report.
Thanks!
This is what I am currently getting
load "C:\Users\UIDQ5763\Desktop\Enviornment.cpp" &
"C:\Users\UIDQ5763\Desktop\GreetingsConsoleApp"
folder-report layout:side-by-side options:display-all &
output-to:C:\Users\UIDQ5763\Report.html output-options:html-color
The documentation for Beyond Compare's scripting language is here. You were probably missing either layout:side-by-side, which gives the general display, or output-options:html-color which is required to get the correct HTML stylized output. You may want to change options:display-all to options:display-mismatches if you only want to see the differences, and you might want to add an expand all command immediately before the folder-report line if you want to see the subfolders recursively.'
The & characters shown in the sample are line continuation characters. Remove them if you don't need to wrap your lines.
Thanks for everyone in advance.
I encountered a problem when using Scrapy on Python 2.7.
The webpage I tried to crawl is a discussion board for Chinese stock market.
When I tried to get the first number "42177" just under the banner of this page (the number you see on that webpage may not be the number you see in the picture shown here, because it represents the number of times this article has been read and is updated realtime...), I always get an empty content. I am aware that this might be the dynamic content issue, but yet don't have a clue how to crawl it properly.
The code I used is:
item["read"] = info.xpath("div[#id='zwmbti']/div[#id='zwmbtilr']/span[#class='tc1']/text()").extract()
I think the xpath is set correctly and I have checked the return value of this response and it indeed told me that there is nothing under this directory. Results shown here:'read': [u'<div id="zwmbtilr"></div>']
If it has something, there should be something between <div id="zwmbtilr"> and </div>.
Really appreciated if you guys share any thoughts on this!
I just opened your link in Firefox with NoScript enabled. There nothing inside the <div #id='zwmbtilr'></div>. If I enable the javascripts, I can see the content you want. So, as you already new, it is a dynamic content issue.
Your first option is try to identify the request generated by javascript. If you can do that, you can send the same request from scrapy. If you can't do it, the next option is usually to use some package with javascript/browser emulation or someting like that. Something like ScrapyJS or Scrapy + Selenium.
am using django ckeditor. Any text/content entered into its editor renders raw html output on the webpage.
for ex: this is rendered output of ckeditor field (RichTextField) on a webpage;
<p><span style="color:rgb(0, 0, 0)">this is a test file ’s forces durin</span><span style="color:rgb(0, 0, 0)">galla’s good test is one that fails Thereafter, never to fail in real environment. </span></p>
I have been looking for a solution for a long time now but unable to find one :( There are some questions which are similar but none of those have been able to help. It will be helpful if any changes suggested are provided with the exact location where it needs to be changed. Needless to say I am a newbie.
Thanks
You need to mark the relevant variable that contains the html snippet in your template as safe
Obviously you should be sure, that the text comes from trusted users and is safe, because with the safe filter you are disabling a security feature (autoescaping) that Django applies per default.
If your ckeditor is part of a comment form and your mark the entered text as safe, anybody with access to the form could inject Javascipt and other (potentially nasty) stuff in your page.
The whole story is explained pretty well in the official docs: https://docs.djangoproject.com/en/dev/topics/templates/#automatic-html-escaping
Is there a way to set a website like google.com as homepage through C++ or C ? How ?
Not sure what your motive is, but I don't think of this as something I want any code on my system to be setting out from under me. It sounds like the kind of thing adware/malware would do to your grandparents (who wouldn't know how to fix it once it's set). Note the negative comments when the question was asked of how to do it from JavaScript:
How can I set default homepage in FF and Chrome via javascript?
It's better to point people at instructions for doing it themselves. Remind with a banner which says "Make us your homepage!", and link to something along these lines:
http://www.makeuseof.com/tag/how-to-change-your-homepage-in-5-browsers/
If not for the aesthetic reasons, there are technical reasons not to try and write code for it. Each browser stores this information in its own place. In IE's case, there appears to be a registry setting:
HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main\Start Page
So you'd use calls to the Windows Registry API to query it and set it. But Firefox doesn't save this in the registry, it saves it in something called prefs.js and you'll be looking for:
user_pref("browser.startup.homepage", .... );
Then there's Opera, Safari, Chrome, etc. All told, better to just give people directions and put them in control of their experience!
Imports Microsft.Win32
...
Module Util
Sub SetHomePage(Dim theUrl As String)
Registry.SetValue("HKCU\Software\Microsoft\Internet Explorer\Main", "Start Page", theUrl)
End Sub
End Module
Yes.
Find the way each browser saves its configuration to disk and edit that (*). It may be a file, or records in a database, or some data in a central registry, or some other scheme --- the browser documentation should tell you.
To open/read/write/save/close a file, the C functions declared in the header <stdio.h> may be helpful.
(*) for Firefox it's a file named "prefs.ini" in a directory somewhere under the users home path; there may be more than 1 such file if the user has more than 1 profile.