I'm looking for a regular expression that can find and replace all the text "anytext" with "anything" in netbeans, some of the symbols also contain this text. I've done it a while back for a single file but now I want to change everything in my application & I'm struggling to get it right.
Just use find & replace to replace all instances of "anytext" with "anything". There is no difference between this and a regex find & replace, because there doesn't exist a pattern that can be easily exploited using regex. There is no difference in this case. Based on your comment, you still must manualy enter the word you want replaced and a word that will replace it.
I think you have misunderstood a bit what regular expressions are all about.
Were you looking for something like this? Where it wouldn't grab it inside word?
\banytext\b
Related
I need a help with mass search and replace using regex.
I have a longer strings where I need to look for any number and particular string - e.g. 321BS and I need to replace just the text string that I was looking for. So I need to look for BS in "gf test test2 321BS test" (the pattern is always the same just the position differs) and change just BS.
Can you please help me to find particular regex for this?
Update: I need t keep the number and change just the text string. I will be doing this notepad++. However I need a general funcion for this if possible. I am a rookie in regex. Moreover, is it possible to do it in Trados SDL Studio? Or how am i able to do it in excel file in bulk?
Thank you very much!
Your question is a bit vague, however, as I understand it you want to match any digits followed by BS, ie 123BS. You want to keep 123 but replace BS?
Regex: (\d+)BS matches 123BS
In notepad++ you can:
match (\d+)BS
replace \1NEWTEXT
This will replace 123BS with 123NEWTXT.
\1 will substitue the capture group (\d+). (which matches 1 or more digits.
You could do this in Trados Studio using an app. The SDLXLIFF Toolkit may be the most appropriate for you. The advantage over Notepad++ is that it's controlled and will only affect the translatable text and not anything that might break the integrity of the file if you make a mistake. You can also handle multiple files, or even multiple Trados Studio projects in one go.
The syntax would be very similar to the suggestion above... you would:
match (\d+)BS
replace $1NEWTEXT
I have phone numbers on my file and I would like to surround each of them with braces, so if I have this:
"+49-1111"
"+49-2222"
I would like to run a replace operation and to get this:
["+49-1111"]
["+49-2222"]
Is that possible with the current vs code find/replace action?
If it is a dup sorry but I could find any explanation anywhere.
Thanks
This is more relevant to regular expression.
Find ("\+\d{2}-\d{4}"), replace the occurrences with [$1]
Be sure to turn the "Use Regular Expression" switch on.
So I read a lot about Negation in Regex but can't solve my problem in MS Word 2016.
How do I exclude a String, Word, Number(s) from being found?
Example:
<[A-Z]{2}[A-Z0-9]{9;11}> to search a String like XY123BBT22223
But how to exclude for example a specefic one like SEDWS12WW04?
Well it depends on what you need to achieve or is this a matter of curiosity... RegEx is not the same as the built-in Advanced Find with Wildcards; for that you need VBA.
Depending on your need, without using VBA, you could make use of space and return characters - something like this will work for the strings provided: [ ^13][A-Z]{2}[0-9]{1,}[A-Z]{1,}[0-9]{1,}[ ^13] (assuming you use normal carriage returns and spaces in your document)
Anyway, this is a good article on wildcard searches in MS Word: https://wordmvp.com/FAQs/General/UsingWildcards.htm
EDIT:
In light of your further comments you will probably want to look at section 8 of the linked article which explains grouping. For my proposed search you can use this to your advantage by creating 3 groups in your 'find' and only modifying the middle group, if indeed you do intend to modify. Using groups the search would look something like:
([ ^13])([A-Z]{2}[0-9]{1,}[A-Z]{1,}[0-9]{1,})([ ^13])
and the replace might look like this:
\1 SOMETHING \3
Note also: compared to a RegEx solution my suggestion is kinda lame, mainly because compared to RegEx, MS-Words find and replace (good as it is, and really it is) is kinda lame... it's hacky but it might work for you (although you might need to do a few searches).
BUT... if it really is REGEX that you want, well you can get access to this via VBA: How to Use/Enable (RegExp object) Regular Expression using VBA (MACRO) in word
And... then you will be able to use proper RegEx for find and replace, well almost - I'm under the impression that the VBA RegEx still has some quirks...
As already noted by others, this is not possible in Microsoft Word's flavor of regular expressions.
Instead, you should use standard regular expressions. It is actually possible to use standard regular expressions in MS Word if you use a special tool that integrates into Microsoft Word called Multiple Find & Replace (see http://www.translatortools.net/products/transtoolsplus/word-multiplefindreplace). This tool opens as a pane to the right of the document window and works just like the Advanced Find & Replace dialog. However, in addition to Word's existing search functionality, it can use the standard regular expressions syntax to search and replace any text within a Word document.
In your particular case, I would use this:
\b[A-Z]{2}[A-Z0-9]{9,11}\b(?<!\bSEDWS12WW04)
To explain, this searches for a word boundary + ID + word boundary, and then it looks back to make sure that the preceding string does not match [word boundary + excluded ID]. In a similar vein, you can do something like
(?<!\bSEDWS12WW04|\bSEDWS12WW05|\bSEDWS12WW05)
to exlude several IDs.
Multiple Find & Replace is quite powerful: you can add any number of expressions (either using regular expressions or using Word's standard search syntax) to a list and then search the document for all of them, replace everything, display all matches in a list and replace only specific matches, and a few more things.
I created this tool for translators and editors, but it is great for any advanced search/replace operations in Word, and I am sure you will find it very useful.
Best regards, Stanislav
I need some help with our migrated site urls's. We moved our site from Joomla to Worpdress and IN our posts we have over 20K of internal links.
The structure of these links are like these:
www.mysite.nl/current-post-title/index.php?option=com_content&view=article&id=5259:related-post-title&catid=35:universum&Itemid=48
What we need is this:
www.mysite.nl/related-post-title
So basically we need to remove everyhing behind www.mysite.nl/ up until the colon :, i.e. remove this: current-post-title/index.php?option=com_content&view=article&id=5259: (must remove the colon itself too)
And then remove everything behind the first ampersand (including the ampersand itself) until the end of the string, i.e. remove &catid=35:universum&Itemid=48
Of course only url strings containing this index.php?option=com_content must be changed.
I have dumped the table in plain text and opened it in Notepad++ to do a search and replace with regular expression because the content that must be removed from these lines is different every time.
Can someone please help me with the right regular expression?
In find what box enter below:
(www.mysite.nl)\/.*index.php\?option=com[^:]+:([^&]+)&.*
In replace with box enter:
\1/\2
Result
www.mysite.nl/related-post-title
Go inside-out, rather than outside-in, replace \/.+&id=\d+\:(.+?)&.+ with /$1. Also, paste a few into http://www.regexr.com/ and play around, although JavaScript and Notepad++ might have some differences in implemented Regex features, e.g. negative lookbehinds.
I've been searching a lot in the web and in here but I can't find a solution to this.
I have to make two replacements in all registry paths saved in a text file as follows:
replace all asterisc with: [#42]
replace all single backslashes with two.
I already have two expressions that do this right:
1st case:
Find: (\*) - Replace: \[#42\]
2nd case:
Find: ([^\\])(\\)([^\\]) - Replace: $1$2\\$3
Now, all I want is to join them together into just one expression so that I can do run this in one time only.
I'm using Notepad++ 6.5.1 in Windows 7 (64 bits).
Example line in which I want this to work (I include backslashes but i don't know if they will appear right in the html):
HKLM\SOFTWARE\Classes\*\shellex\ContextMenuHandlers\
I already tried separating it with a pipe, like I do in Jscript (WSH), but it doesn't work here. I also tried a lot of other things but none worked.
Any help?
Thanks!
Edit: I have put all the backslashes right, but the page html seem to be "eating" some of them!
Edit2: Someone reedited my text to include an accent that doesn't remove the backslashes, so the expressions went wrong again. But I got it and fixed it. ;-)
Sorry, but this was my first post here. :)
As everyone else already mentioned this is not possible.
But, you can achieve what you want in Notepad++ by using a Macro.
Go to "Macro" > "Start Recording" menu, apply those two search and replace regular expressions, press "Stop Recording", then "Save Current Recorded Macro", there give it a name, assign a shortcut, and you are done. You now can reuse the same replacements whenever you want with one shortcut.
Since your replacement strings are totally different and use data that come not from any capture (i.e. [#42]), you can't.
Keep in mind that replacement strings are only masks, and can not contain any conditional content.