Modularity: Using Interfaces or not? - c++

Since a few years, common sense seems to dictate that it's better to program against interfaces rather than against implementations. For high-level code this indeed seems logical, e.g. if I have a complex solver in my application, it seems better to have something like this:
ISolver *solver = solverFactory.getSolver();
solver->solve(inputdata);
Rather than
Solver solver;
solver.solve(inputdata);
In the first code it is also easier to mock the solver, and thus, to unit test.
But my question is: at which level doesn't it make sense anymore to use interface. E.g. if I have a ComplexNumber class (or String class, or whatever) in my application, then writing this:
IComplexNumber *complexNumber = complexNumberFactory.create(1,2); // 1+2i
Seems much more complex (especially regarding performance) than writing:
ComplexNumber complexNumber(1,2); // 1+2i
So, which elements are important in deciding whether something should be put behind an interface and when it shouldn't be put behind an interface?

Reasons to move to an interface are when it makes things simpler or reduces coupling. (Thats what an interface is for).
Reasons to move away from an interface are if it makes things more complicated or kills performance (but profile that to be sure). I'd argue that your IComplexNumber class actually makes the class heirarchy more complex unless you're introducing a MockComplexNumber, but I doubt such a class would be usefull... and it will probably make make things slower, but I'd measure that.
But don't think you need to do everything one way, or that your decisions are fixed in stone. It's pretty easy to convert to/from using an interface.

If you divide your classes into "service" and "value" classes, depending on the roles they play, then the answer is simple. Only use interfaces on service classes. In your question, "solver" is a service and "complex number" is a value.
Value classes should be easy to create using new() because they only accept basic types and other value classes in the constructor. Value classes are not useful to mock because you can use the real thing.
It may be useful to mock service classes and you may want multiple implementations. Your solverFactory could return a naiveSolver, a lookupSolver, a geneticSolver, a mockSolver etc. Here an interface is uesful.

With C++ it does not matter so as c++ has multiple inheritance and so an interface is an abstract class which you can add implemetation to. Where I have found interfaces most used is Java and C# which have single inheritance and if you wan a class to implement several things only one can be an abstract class the others must be interfaces

Related

C++ Inheritence vs Using parent class as a field in children classes [duplicate]

Why prefer composition over inheritance? What trade-offs are there for each approach? When should you choose inheritance over composition?
Prefer composition over inheritance as it is more malleable / easy to modify later, but do not use a compose-always approach. With composition, it's easy to change behavior on the fly with Dependency Injection / Setters. Inheritance is more rigid as most languages do not allow you to derive from more than one type. So the goose is more or less cooked once you derive from TypeA.
My acid test for the above is:
Does TypeB want to expose the complete interface (all public methods no less) of TypeA such that TypeB can be used where TypeA is expected? Indicates Inheritance.
e.g. A Cessna biplane will expose the complete interface of an airplane, if not more. So that makes it fit to derive from Airplane.
Does TypeB want only some/part of the behavior exposed by TypeA? Indicates need for Composition.
e.g. A Bird may need only the fly behavior of an Airplane. In this case, it makes sense to extract it out as an interface / class / both and make it a member of both classes.
Update: Just came back to my answer and it seems now that it is incomplete without a specific mention of Barbara Liskov's Liskov Substitution Principle as a test for 'Should I be inheriting from this type?'
Think of containment as a has a relationship. A car "has an" engine, a person "has a" name, etc.
Think of inheritance as an is a relationship. A car "is a" vehicle, a person "is a" mammal, etc.
I take no credit for this approach. I took it straight from the Second Edition of Code Complete by Steve McConnell, Section 6.3.
If you understand the difference, it's easier to explain.
Procedural Code
An example of this is PHP without the use of classes (particularly before PHP5). All logic is encoded in a set of functions. You may include other files containing helper functions and so on and conduct your business logic by passing data around in functions. This can be very hard to manage as the application grows. PHP5 tries to remedy this by offering a more object-oriented design.
Inheritance
This encourages the use of classes. Inheritance is one of the three tenets of OO design (inheritance, polymorphism, encapsulation).
class Person {
String Title;
String Name;
Int Age
}
class Employee : Person {
Int Salary;
String Title;
}
This is inheritance at work. The Employee "is a" Person or inherits from Person. All inheritance relationships are "is-a" relationships. Employee also shadows the Title property from Person, meaning Employee.Title will return the Title for the Employee and not the Person.
Composition
Composition is favoured over inheritance. To put it very simply you would have:
class Person {
String Title;
String Name;
Int Age;
public Person(String title, String name, String age) {
this.Title = title;
this.Name = name;
this.Age = age;
}
}
class Employee {
Int Salary;
private Person person;
public Employee(Person p, Int salary) {
this.person = p;
this.Salary = salary;
}
}
Person johnny = new Person ("Mr.", "John", 25);
Employee john = new Employee (johnny, 50000);
Composition is typically "has a" or "uses a" relationship. Here the Employee class has a Person. It does not inherit from Person but instead gets the Person object passed to it, which is why it "has a" Person.
Composition over Inheritance
Now say you want to create a Manager type so you end up with:
class Manager : Person, Employee {
...
}
This example will work fine, however, what if Person and Employee both declared Title? Should Manager.Title return "Manager of Operations" or "Mr."? Under composition this ambiguity is better handled:
Class Manager {
public string Title;
public Manager(Person p, Employee e)
{
this.Title = e.Title;
}
}
The Manager object is composed of an Employee and a Person. The Title behaviour is taken from Employee. This explicit composition removes ambiguity among other things and you'll encounter fewer bugs.
With all the undeniable benefits provided by inheritance, here's some of its disadvantages.
Disadvantages of Inheritance:
You can't change the implementation inherited from super classes at runtime (obviously because inheritance is defined at compile time).
Inheritance exposes a subclass to details of its parent class implementation, that's why it's often said that inheritance breaks encapsulation (in a sense that you really need to focus on interfaces only not implementation, so reusing by sub classing is not always preferred).
The tight coupling provided by inheritance makes the implementation of a subclass very bound up with the implementation of a super class that any change in the parent implementation will force the sub class to change.
Excessive reusing by sub-classing can make the inheritance stack very deep and very confusing too.
On the other hand Object composition is defined at runtime through objects acquiring references to other objects. In such a case these objects will never be able to reach each-other's protected data (no encapsulation break) and will be forced to respect each other's interface. And in this case also, implementation dependencies will be a lot less than in case of inheritance.
Another, very pragmatic reason, to prefer composition over inheritance has to do with your domain model, and mapping it to a relational database. It's really hard to map inheritance to the SQL model (you end up with all sorts of hacky workarounds, like creating columns that aren't always used, using views, etc). Some ORMLs try to deal with this, but it always gets complicated quickly. Composition can be easily modeled through a foreign-key relationship between two tables, but inheritance is much harder.
While in short words I would agree with "Prefer composition over inheritance", very often for me it sounds like "prefer potatoes over coca-cola". There are places for inheritance and places for composition. You need to understand difference, then this question will disappear. What it really means for me is "if you are going to use inheritance - think again, chances are you need composition".
You should prefer potatoes over coca cola when you want to eat, and coca cola over potatoes when you want to drink.
Creating a subclass should mean more than just a convenient way to call superclass methods. You should use inheritance when subclass "is-a" super class both structurally and functionally, when it can be used as superclass and you are going to use that. If it is not the case - it is not inheritance, but something else. Composition is when your objects consists of another, or has some relationship to them.
So for me it looks like if someone does not know if he needs inheritance or composition, the real problem is that he does not know if he want to drink or to eat. Think about your problem domain more, understand it better.
Didn't find a satisfactory answer here, so I wrote a new one.
To understand why "prefer composition over inheritance", we need first get back the assumption omitted in this shortened idiom.
There are two benefits of inheritance: subtyping and subclassing
Subtyping means conforming to a type (interface) signature, i.e. a set of APIs, and one can override part of the signature to achieve subtyping polymorphism.
Subclassing means implicit reuse of method implementations.
With the two benefits comes two different purposes for doing inheritance: subtyping oriented and code reuse oriented.
If code reuse is the sole purpose, subclassing may give one more than what he needs, i.e. some public methods of the parent class don't make much sense for the child class. In this case, instead of favoring composition over inheritance, composition is demanded. This is also where the "is-a" vs. "has-a" notion comes from.
So only when subtyping is purposed, i.e. to use the new class later in a polymorphic manner, do we face the problem of choosing inheritance or composition. This is the assumption that gets omitted in the shortened idiom under discussion.
To subtype is to conform to a type signature, this means composition has always to expose no less amount of APIs of the type. Now the trade offs kick in:
Inheritance provides straightforward code reuse if not overridden, while composition has to re-code every API, even if it's just a simple job of delegation.
Inheritance provides straightforward open recursion via the internal polymorphic site this, i.e. invoking overriding method (or even type) in another member function, either public or private (though discouraged). Open recursion can be simulated via composition, but it requires extra effort and may not always viable(?). This answer to a duplicated question talks something similar.
Inheritance exposes protected members. This breaks encapsulation of the parent class, and if used by subclass, another dependency between the child and its parent is introduced.
Composition has the befit of inversion of control, and its dependency can be injected dynamically, as is shown in decorator pattern and proxy pattern.
Composition has the benefit of combinator-oriented programming, i.e. working in a way like the composite pattern.
Composition immediately follows programming to an interface.
Composition has the benefit of easy multiple inheritance.
With the above trade offs in mind, we hence prefer composition over inheritance. Yet for tightly related classes, i.e. when implicit code reuse really make benefits, or the magic power of open recursion is desired, inheritance shall be the choice.
Inheritance is pretty enticing especially coming from procedural-land and it often looks deceptively elegant. I mean all I need to do is add this one bit of functionality to some other class, right? Well, one of the problems is that inheritance is probably the worst form of coupling you can have
Your base class breaks encapsulation by exposing implementation details to subclasses in the form of protected members. This makes your system rigid and fragile. The more tragic flaw however is the new subclass brings with it all the baggage and opinion of the inheritance chain.
The article, Inheritance is Evil: The Epic Fail of the DataAnnotationsModelBinder, walks through an example of this in C#. It shows the use of inheritance when composition should have been used and how it could be refactored.
When can you use composition?
You can always use composition. In some cases, inheritance is also possible and may lead to a more powerful and/or intuitive API, but composition is always an option.
When can you use inheritance?
It is often said that if "a bar is a foo", then the class Bar can inherit the class Foo. Unfortunately, this test alone is not reliable, use the following instead:
a bar is a foo, AND
bars can do everything that foos can do.
The first test ensures that all getters of Foo make sense in Bar (= shared properties), while the second test makes sure that all setters of Foo make sense in Bar (= shared functionality).
Example: Dog/Animal
A dog is an animal AND dogs can do everything that animals can do (such as breathing, moving, etc.). Therefore, the class Dog can inherit the class Animal.
Counter-example: Circle/Ellipse
A circle is an ellipse BUT circles can't do everything that ellipses can do. For example, circles can't stretch, while ellipses can. Therefore, the class Circle cannot inherit the class Ellipse.
This is called the Circle-Ellipse problem, which isn't really a problem, but more an indication that "a bar is a foo" isn't a reliable test by itself. In particular, this example highlights that derived classes should extend the functionality of base classes, never restrict it. Otherwise, the base class couldn't be used polymorphically. Adding the test "bars can do everything that foos can do" ensures that polymorphic use is possible, and is equivalent to the Liskov Substitution Principle:
Functions that use pointers or references to base classes must be able to use objects of derived classes without knowing it
When should you use inheritance?
Even if you can use inheritance doesn't mean you should: using composition is always an option. Inheritance is a powerful tool allowing implicit code reuse and dynamic dispatch, but it does come with a few disadvantages, which is why composition is often preferred. The trade-offs between inheritance and composition aren't obvious, and in my opinion are best explained in lcn's answer.
As a rule of thumb, I tend to choose inheritance over composition when polymorphic use is expected to be very common, in which case the power of dynamic dispatch can lead to a much more readable and elegant API. For example, having a polymorphic class Widget in GUI frameworks, or a polymorphic class Node in XML libraries allows to have an API which is much more readable and intuitive to use than what you would have with a solution purely based on composition.
In Java or C#, an object cannot change its type once it has been instantiated.
So, if your object need to appear as a different object or behave differently depending on an object state or conditions, then use Composition: Refer to State and Strategy Design Patterns.
If the object need to be of the same type, then use Inheritance or implement interfaces.
Personally I learned to always prefer composition over inheritance. There is no programmatic problem you can solve with inheritance which you cannot solve with composition; though you may have to use Interfaces(Java) or Protocols(Obj-C) in some cases. Since C++ doesn't know any such thing, you'll have to use abstract base classes, which means you cannot get entirely rid of inheritance in C++.
Composition is often more logical, it provides better abstraction, better encapsulation, better code reuse (especially in very large projects) and is less likely to break anything at a distance just because you made an isolated change anywhere in your code. It also makes it easier to uphold the "Single Responsibility Principle", which is often summarized as "There should never be more than one reason for a class to change.", and it means that every class exists for a specific purpose and it should only have methods that are directly related to its purpose. Also having a very shallow inheritance tree makes it much easier to keep the overview even when your project starts to get really large. Many people think that inheritance represents our real world pretty well, but that isn't the truth. The real world uses much more composition than inheritance. Pretty much every real world object you can hold in your hand has been composed out of other, smaller real world objects.
There are downsides of composition, though. If you skip inheritance altogether and only focus on composition, you will notice that you often have to write a couple of extra code lines that weren't necessary if you had used inheritance. You are also sometimes forced to repeat yourself and this violates the DRY Principle (DRY = Don't Repeat Yourself). Also composition often requires delegation, and a method is just calling another method of another object with no other code surrounding this call. Such "double method calls" (which may easily extend to triple or quadruple method calls and even farther than that) have much worse performance than inheritance, where you simply inherit a method of your parent. Calling an inherited method may be equally fast as calling a non-inherited one, or it may be slightly slower, but is usually still faster than two consecutive method calls.
You may have noticed that most OO languages don't allow multiple inheritance. While there are a couple of cases where multiple inheritance can really buy you something, but those are rather exceptions than the rule. Whenever you run into a situation where you think "multiple inheritance would be a really cool feature to solve this problem", you are usually at a point where you should re-think inheritance altogether, since even it may require a couple of extra code lines, a solution based on composition will usually turn out to be much more elegant, flexible and future proof.
Inheritance is really a cool feature, but I'm afraid it has been overused the last couple of years. People treated inheritance as the one hammer that can nail it all, regardless if it was actually a nail, a screw, or maybe a something completely different.
My general rule of thumb: Before using inheritance, consider if composition makes more sense.
Reason: Subclassing usually means more complexity and connectedness, i.e. harder to change, maintain, and scale without making mistakes.
A much more complete and concrete answer from Tim Boudreau of Sun:
Common problems to the use of inheritance as I see it are:
Innocent acts can have unexpected results - The classic example of this is calls to overridable methods from the superclass
constructor, before the subclasses instance fields have been
initialized. In a perfect world, nobody would ever do that. This is
not a perfect world.
It offers perverse temptations for subclassers to make assumptions about order of method calls and such - such assumptions tend not to
be stable if the superclass may evolve over time. See also my toaster
and coffee pot analogy.
Classes get heavier - you don't necessarily know what work your superclass is doing in its constructor, or how much memory it's going
to use. So constructing some innocent would-be lightweight object can
be far more expensive than you think, and this may change over time if
the superclass evolves
It encourages an explosion of subclasses. Classloading costs time, more classes costs memory. This may be a non-issue until you're
dealing with an app on the scale of NetBeans, but there, we had real
issues with, for example, menus being slow because the first display
of a menu triggered massive class loading. We fixed this by moving to
more declarative syntax and other techniques, but that cost time to
fix as well.
It makes it harder to change things later - if you've made a class public, swapping the superclass is going to break subclasses -
it's a choice which, once you've made the code public, you're married
to. So if you're not altering the real functionality to your
superclass, you get much more freedom to change things later if you
use, rather than extend the thing you need. Take, for example,
subclassing JPanel - this is usually wrong; and if the subclass is
public somewhere, you never get a chance to revisit that decision. If
it's accessed as JComponent getThePanel() , you can still do it (hint:
expose models for the components within as your API).
Object hierarchies don't scale (or making them scale later is much harder than planning ahead) - this is the classic "too many layers"
problem. I'll go into this below, and how the AskTheOracle pattern can
solve it (though it may offend OOP purists).
...
My take on what to do, if you do allow for inheritance, which you may
take with a grain of salt is:
Expose no fields, ever, except constants
Methods shall be either abstract or final
Call no methods from the superclass constructor
...
all of this applies less to small projects than large ones, and less
to private classes than public ones
Inheritance is very powerful, but you can't force it (see: the circle-ellipse problem). If you really can't be completely sure of a true "is-a" subtype relationship, then it's best to go with composition.
Inheritance creates a strong relationship between a subclass and super class; subclass must be aware of super class'es implementation details. Creating the super class is much harder, when you have to think about how it can be extended. You have to document class invariants carefully, and state what other methods overridable methods use internally.
Inheritance is sometimes useful, if the hierarchy really represents a is-a-relationship. It relates to Open-Closed Principle, which states that classes should be closed for modification but open to extension. That way you can have polymorphism; to have a generic method that deals with super type and its methods, but via dynamic dispatch the method of subclass is invoked. This is flexible, and helps to create indirection, which is essential in software (to know less about implementation details).
Inheritance is easily overused, though, and creates additional complexity, with hard dependencies between classes. Also understanding what happens during execution of a program gets pretty hard due to layers and dynamic selection of method calls.
I would suggest using composing as the default. It is more modular, and gives the benefit of late binding (you can change the component dynamically). Also it's easier to test the things separately. And if you need to use a method from a class, you are not forced to be of certain form (Liskov Substitution Principle).
Suppose an aircraft has only two parts: an engine and wings.
Then there are two ways to design an aircraft class.
Class Aircraft extends Engine{
var wings;
}
Now your aircraft can start with having fixed wings
and change them to rotary wings on the fly. It's essentially
an engine with wings. But what if I wanted to change
the engine on the fly as well?
Either the base class Engine exposes a mutator to change its
properties, or I redesign Aircraft as:
Class Aircraft {
var wings;
var engine;
}
Now, I can replace my engine on the fly as well.
If you want the canonical, textbook answer people have been giving since the rise of OOP (which you see many people giving in these answers), then apply the following rule: "if you have an is-a relationship, use inheritance. If you have a has-a relationship, use composition".
This is the traditional advice, and if that satisfies you, you can stop reading here and go on your merry way. For everyone else...
is-a/has-a comparisons have problems
For example:
A square is-a rectangle, but if your rectangle class has setWidth()/setHeight() methods, then there's no reasonable way to make a Square inherit from Rectangle without breaking Liskov's substitution principle.
An is-a relationship can often be rephrased to sound like a has-a relationship. For example, an employee is-a person, but a person also has-an employment status of "employed".
is-a relationships can lead to nasty multiple inheritance hierarchies if you're not careful. After all, there's no rule in English that states that an object is exactly one thing.
People are quick to pass this "rule" around, but has anyone ever tried to back it up, or explain why it's a good heuristic to follow? Sure, it fits nicely into the idea that OOP is supposed to model the real world, but that's not in-and-of-itself a reason to adopt a principle.
See this StackOverflow question for more reading on this subject.
To know when to use inheritance vs composition, we first need to understand the pros and cons of each.
The problems with implementation inheritance
Other answers have done a wonderful job at explaining the issues with inheritance, so I'll try to not delve into too many details here. But, here's a brief list:
It can be difficult to follow a logic that weaves between base and sub-class methods.
Carelessly implementing one method in your class by calling another overridable method will cause you to leak implementation details and break encapsulation, as the end-user could override your method and detect when you internally call it. (See "Effective Java" item 18).
The fragile base problem, which simply states that your end-user's code will break if they happen to depend on the leakage of implementation details when you attempt to change them. To make matters worse, most OOP languages allow inheritance by default - API designers who aren't proactively preventing people from inheriting from their public classes need to be extra cautious whenever they refactor their base classes. Unfortunately, the fragile base problem is often misunderstood, causing many to not understand what it takes to maintain a class that anyone can inherit from.
The deadly diamond of death
The problems with composition
It can sometimes be a little verbose.
That's it. I'm serious. This is still a real issue and can sometimes create conflict with the DRY principle, but it's generally not that bad, at least compared to the myriad of pitfalls associated with inheritance.
When should inheritance be used?
Next time you're drawing out your fancy UML diagrams for a project (if you do that), and you're thinking about adding in some inheritance, please adhere to the following advice: don't.
At least, not yet.
Inheritance is sold as a tool to achieve polymorphism, but bundled with it is this powerful code-reuse system, that frankly, most code doesn't need. The problem is, as soon as you publicly expose your inheritance hierarchy, you're locked into this particular style of code-reuse, even if it's overkill to solve your particular problem.
To avoid this, my two cents would be to never expose your base classes publicly.
If you need polymorphism, use an interface.
If you need to allow people to customize the behavior of your class, provide explicit hook-in points via the strategy pattern, it's a more readable way to accomplish this, plus, it's easier to keep this sort of API stable as you're in full control over what behaviors they can and can not change.
If you're trying to follow the open-closed principle by using inheritance to avoid adding a much-needed update to a class, just don't. Update the class. Your codebase will be much cleaner if you actually take ownership of the code you're hired to maintain instead of trying to tack stuff onto the side of it. If you're scared about introducing bugs, then get the existing code under test.
If you need to reuse code, start out by trying to use composition or helper functions.
Finally, if you've decided that there's no other good option, and you must use inheritance to achieve the code-reuse that you need, then you can use it, but, follow these four P.A.I.L. rules of restricted inheritance to keep it sane.
Use inheritance as a private implementation detail. Don't expose your base class publicly, use interfaces for that. This lets you freely add or remove inheritance as you see fit without making a breaking change.
Keep your base class abstract. It makes it easier to divide out the logic that needs to be shared from the logic that doesn't.
Isolate your base and child classes. Don't let your subclass override base class methods (use the strategy pattern for that), and avoid having them expect properties/methods to exist on each other, use other forms of code-sharing to achieve that. Use appropriate language features to force all methods on the base class to be non-overridable ("final" in Java, or non-virtual in C#).
Inheritance is a last resort.
The Isolate rule in particular may sound a little rough to follow, but if you discipline yourself, you'll get some pretty nice benefits. In particular, it gives you the freedom to avoid all of the main nasty pitfalls associated with the inheritance that were mentioned above.
It's much easier to follow the code because it doesn't weave in and out of base/sub classes.
You can not accidentally leak when your methods are internally calling other overridable methods if you never make any of your methods overridable. In other words, you won't accidentally break encapsulation.
The fragile base class problem stems from the ability to depend on accidentally leaked implementation details. Since the base class is now isolated, it will be no more fragile than a class depending on another via composition.
The deadly diamond of death isn't an issue anymore, since there's simply no need to have multiple layers of inheritance. If you have the abstract base classes B and C, which both share a lot of functionality, just move that functionality out of B and C and into a new abstract base class, class D. Anyone who inherited from B should update to inherit from both B and D, and anyone who inherited from C should inherit from C and D. Since your base classes are all private implementation details, it shouldn't be too difficult to figure out who's inheriting from what, to make these changes.
Conclusion
My primary suggestion would be to use your brain on this matter. What's far more important than a list of dos and don'ts about when to use inheritance is an intuitive understanding of inheritance and its associated pros and cons, along with a good understanding of the other tools out there that can be used instead of inheritance (composition isn't the only alternative. For example, the strategy pattern is an amazing tool that's forgotten far too often). Perhaps when you have a good, solid understanding of all of these tools, you'll choose to use inheritance more often than I would recommend, and that's completely fine. At least, you're making an informed decision, and aren't just using inheritance because that's the only way you know how to do it.
Further reading:
An article I wrote on this subject, that dives even deeper and provides examples.
A webpage talking about three different jobs that inheritance does, and how those jobs can be done via other means in the Go language.
A list of reasons why it can be good to declare your class as non-inheritable (e.g. "final" in Java).
The "Effective Java" book by Joshua Bloch, item 18, which discusses composition over inheritance, and some of the dangers of inheritance.
You need to have a look at The Liskov Substitution Principle in Uncle Bob's SOLID principles of class design. :)
To address this question from a different perspective for newer programmers:
Inheritance is often taught early when we learn object-oriented programming, so it's seen as an easy solution to a common problem.
I have three classes that all need some common functionality. So if I
write a base class and have them all inherit from it, then they will
all have that functionality and I'll only need to maintain it in once
place.
It sounds great, but in practice it almost never, ever works, for one of several reasons:
We discover that there are some other functions that we want our classes to have. If the way that we add functionality to classes is through inheritance, we have to decide - do we add it to the existing base class, even though not every class that inherits from it needs that functionality? Do we create another base class? But what about classes that already inherit from the other base class?
We discover that for just one of the classes that inherits from our base class we want the base class to behave a little differently. So now we go back and tinker with our base class, maybe adding some virtual methods, or even worse, some code that says, "If I'm inherited type A, do this, but if I'm inherited type B, do that." That's bad for lots of reasons. One is that every time we change the base class, we're effectively changing every inherited class. So we're really changing class A, B, C, and D because we need a slightly different behavior in class A. As careful as we think we are, we might break one of those classes for reasons that have nothing to do with those classes.
We might know why we decided to make all of these classes inherit from each other, but it might not (probably won't) make sense to someone else who has to maintain our code. We might force them into a difficult choice - do I do something really ugly and messy to make the change I need (see the previous bullet point) or do I just rewrite a bunch of this.
In the end, we tie our code in some difficult knots and get no benefit whatsoever from it except that we get to say, "Cool, I learned about inheritance and now I used it." That's not meant to be condescending because we've all done it. But we all did it because no one told us not to.
As soon as someone explained "favor composition over inheritance" to me, I thought back over every time I tried to share functionality between classes using inheritance and realized that most of the time it didn't really work well.
The antidote is the Single Responsibility Principle. Think of it as a constraint. My class must do one thing. I must be able to give my class a name that somehow describes that one thing it does. (There are exceptions to everything, but absolute rules are sometimes better when we're learning.) It follows that I cannot write a base class called ObjectBaseThatContainsVariousFunctionsNeededByDifferentClasses. Whatever distinct functionality I need must be in its own class, and then other classes that need that functionality can depend on that class, not inherit from it.
At the risk of oversimplifying, that's composition - composing multiple classes to work together. And once we form that habit we find that it's much more flexible, maintainable, and testable than using inheritance.
When you want to "copy"/Expose the base class' API, you use inheritance. When you only want to "copy" functionality, use delegation.
One example of this: You want to create a Stack out of a List. Stack only has pop, push and peek. You shouldn't use inheritance given that you don't want push_back, push_front, removeAt, et al.-kind of functionality in a Stack.
These two ways can live together just fine and actually support each other.
Composition is just playing it modular: you create interface similar to the parent class, create new object and delegate calls to it. If these objects need not to know of each other, it's quite safe and easy to use composition. There are so many possibilites here.
However, if the parent class for some reason needs to access functions provided by the "child class" for inexperienced programmer it may look like it's a great place to use inheritance. The parent class can just call it's own abstract "foo()" which is overwritten by the subclass and then it can give the value to the abstract base.
It looks like a nice idea, but in many cases it's better just give the class an object which implements the foo() (or even set the value provided the foo() manually) than to inherit the new class from some base class which requires the function foo() to be specified.
Why?
Because inheritance is a poor way of moving information.
The composition has a real edge here: the relationship can be reversed: the "parent class" or "abstract worker" can aggregate any specific "child" objects implementing certain interface + any child can be set inside any other type of parent, which accepts it's type. And there can be any number of objects, for example MergeSort or QuickSort could sort any list of objects implementing an abstract Compare -interface. Or to put it another way: any group of objects which implement "foo()" and other group of objects which can make use of objects having "foo()" can play together.
I can think of three real reasons for using inheritance:
You have many classes with same interface and you want to save time writing them
You have to use same Base Class for each object
You need to modify the private variables, which can not be public in any case
If these are true, then it is probably necessary to use inheritance.
There is nothing bad in using reason 1, it is very good thing to have a solid interface on your objects. This can be done using composition or with inheritance, no problem - if this interface is simple and does not change. Usually inheritance is quite effective here.
If the reason is number 2 it gets a bit tricky. Do you really only need to use the same base class? In general, just using the same base class is not good enough, but it may be a requirement of your framework, a design consideration which can not be avoided.
However, if you want to use the private variables, the case 3, then you may be in trouble. If you consider global variables unsafe, then you should consider using inheritance to get access to private variables also unsafe. Mind you, global variables are not all THAT bad - databases are essentially big set of global variables. But if you can handle it, then it's quite fine.
Aside from is a/has a considerations, one must also consider the "depth" of inheritance your object has to go through. Anything beyond five or six levels of inheritance deep might cause unexpected casting and boxing/unboxing problems, and in those cases it might be wise to compose your object instead.
When you have an is-a relation between two classes (example dog is a canine), you go for inheritance.
On the other hand when you have has-a or some adjective relationship between two classes (student has courses) or (teacher studies courses), you chose composition.
A simple way to make sense of this would be that inheritance should be used when you need an object of your class to have the same interface as its parent class, so that it can thereby be treated as an object of the parent class (upcasting). Moreover, function calls on a derived class object would remain the same everywhere in code, but the specific method to call would be determined at runtime (i.e. the low-level implementation differs, the high-level interface remains the same).
Composition should be used when you do not need the new class to have the same interface, i.e. you wish to conceal certain aspects of the class' implementation which the user of that class need not know about. So composition is more in the way of supporting encapsulation (i.e. concealing the implementation) while inheritance is meant to support abstraction (i.e. providing a simplified representation of something, in this case the same interface for a range of types with different internals).
Subtyping is appropriate and more powerful where the invariants can be enumerated, else use function composition for extensibility.
I agree with #Pavel, when he says, there are places for composition and there are places for inheritance.
I think inheritance should be used if your answer is an affirmative to any of these questions.
Is your class part of a structure that benefits from polymorphism ? For example, if you had a Shape class, which declares a method called draw(), then we clearly need Circle and Square classes to be subclasses of Shape, so that their client classes would depend on Shape and not on specific subclasses.
Does your class need to re-use any high level interactions defined in another class ? The template method design pattern would be impossible to implement without inheritance. I believe all extensible frameworks use this pattern.
However, if your intention is purely that of code re-use, then composition most likely is a better design choice.
Inheritance is a very powerfull machanism for code reuse. But needs to be used properly. I would say that inheritance is used correctly if the subclass is also a subtype of the parent class. As mentioned above, the Liskov Substitution Principle is the key point here.
Subclass is not the same as subtype. You might create subclasses that are not subtypes (and this is when you should use composition). To understand what a subtype is, lets start giving an explanation of what a type is.
When we say that the number 5 is of type integer, we are stating that 5 belongs to a set of possible values (as an example, see the possible values for the Java primitive types). We are also stating that there is a valid set of methods I can perform on the value like addition and subtraction. And finally we are stating that there are a set of properties that are always satisfied, for example, if I add the values 3 and 5, I will get 8 as a result.
To give another example, think about the abstract data types, Set of integers and List of integers, the values they can hold are restricted to integers. They both support a set of methods, like add(newValue) and size(). And they both have different properties (class invariant), Sets does not allow duplicates while List does allow duplicates (of course there are other properties that they both satisfy).
Subtype is also a type, which has a relation to another type, called parent type (or supertype). The subtype must satisfy the features (values, methods and properties) of the parent type. The relation means that in any context where the supertype is expected, it can be substitutable by a subtype, without affecting the behaviour of the execution. Let’s go to see some code to exemplify what I’m saying. Suppose I write a List of integers (in some sort of pseudo language):
class List {
data = new Array();
Integer size() {
return data.length;
}
add(Integer anInteger) {
data[data.length] = anInteger;
}
}
Then, I write the Set of integers as a subclass of the List of integers:
class Set, inheriting from: List {
add(Integer anInteger) {
if (data.notContains(anInteger)) {
super.add(anInteger);
}
}
}
Our Set of integers class is a subclass of List of Integers, but is not a subtype, due to it is not satisfying all the features of the List class. The values, and the signature of the methods are satisfied but the properties are not. The behaviour of the add(Integer) method has been clearly changed, not preserving the properties of the parent type. Think from the point of view of the client of your classes. They might receive a Set of integers where a List of integers is expected. The client might want to add a value and get that value added to the List even if that value already exist in the List. But her wont get that behaviour if the value exists. A big suprise for her!
This is a classic example of an improper use of inheritance. Use composition in this case.
(a fragment from: use inheritance properly).
Even though Composition is preferred, I would like to highlight pros of Inheritance and cons of Composition.
Pros of Inheritance:
It establishes a logical "IS A" relation. If Car and Truck are two types of Vehicle ( base class), child class IS A base class.
i.e.
Car is a Vehicle
Truck is a Vehicle
With inheritance, you can define/modify/extend a capability
Base class provides no implementation and sub-class has to override complete method (abstract) => You can implement a contract
Base class provides default implementation and sub-class can change the behaviour => You can re-define contract
Sub-class adds extension to base class implementation by calling super.methodName() as first statement => You can extend a contract
Base class defines structure of the algorithm and sub-class will override a part of algorithm => You can implement Template_method without change in base class skeleton
Cons of Composition:
In inheritance, subclass can directly invoke base class method even though it's not implementing base class method because of IS A relation. If you use composition, you have to add methods in container class to expose contained class API
e.g. If Car contains Vehicle and if you have to get price of the Car, which has been defined in Vehicle, your code will be like this
class Vehicle{
protected double getPrice(){
// return price
}
}
class Car{
Vehicle vehicle;
protected double getPrice(){
return vehicle.getPrice();
}
}
A rule of thumb I have heard is inheritance should be used when its a "is-a" relationship and composition when its a "has-a". Even with that I feel that you should always lean towards composition because it eliminates a lot of complexity.
As many people told, I will first start with the check - whether there exists an "is-a" relationship. If it exists I usually check the following:
Whether the base class can be instantiated. That is, whether the base class can be non-abstract. If it can be non-abstract I usually prefer composition
E.g 1. Accountant is an Employee. But I will not use inheritance because a Employee object can be instantiated.
E.g 2. Book is a SellingItem. A SellingItem cannot be instantiated - it is abstract concept. Hence I will use inheritacne. The SellingItem is an abstract base class (or interface in C#)
What do you think about this approach?
Also, I support #anon answer in Why use inheritance at all?
The main reason for using inheritance is not as a form of composition - it is so you can get polymorphic behaviour. If you don't need polymorphism, you probably should not be using inheritance.
#MatthieuM. says in https://softwareengineering.stackexchange.com/questions/12439/code-smell-inheritance-abuse/12448#comment303759_12448
The issue with inheritance is that it can be used for two orthogonal purposes:
interface (for polymorphism)
implementation (for code reuse)
REFERENCE
Which class design is better?
Inheritance vs. Aggregation
Composition v/s Inheritance is a wide subject. There is no real answer for what is better as I think it all depends on the design of the system.
Generally type of relationship between object provide better information to choose one of them.
If relation type is "IS-A" relation then Inheritance is better approach.
otherwise relation type is "HAS-A" relation then composition will better approach.
Its totally depend on entity relationship.

In a C++ unit test context, should an abstract base class have other abstract base classes as function parameters?

I try to implement uni tests for our C++ legacy code base. I read through Michael Feathers "Working effectively with legacy code" and got some idea how to achieve my goal. I use GooleTest/GooleMock as a framework and already implemented some first tests involving mock objects.
To do that, I tried the "Extract interface" approach, which worked quite well in one case:
class MyClass
{
...
void MyFunction(std::shared_ptr<MyOtherClass> parameter);
}
became:
class MyClass
{
...
void MyFunction(std::shared_ptr<IMyOtherClass> parameter);
}
and I passed a ProdMyOtherClass in production and a MockMyOtherClass in test. All good so far.
But now, I have another class using MyClass like:
class WorkOnMyClass
{
...
void DoSomeWork(std::shared_ptr<MyClass> parameter);
}
If I want to test WorkOnMyClass and I want to mock MyClass during that test, I have to extract interface again. And that leads to my question, which I couldn't find an answer to so far: how would the interface look like? My guess is, that it should be all abstract, so:
class IMyClass
{
...
virtual void MyFunction(std::shared_ptr<IMyOtherClass> parameter) = 0;
}
That leaves me with three files for every class: all virtual base interface class, production implementation using all production parameters and mock implementation using all mock parameters. Is this the correct approach?
I only found simple examples, where function parameters are primitives, but not classes, which in turn need tests themselves (and may therefore require interfaces).
TLDR in bold
As Jeffery Coffin has already pointed out, there is no one right way to do what you're seeking to accomplish. There is no "one-size fits all" in software, so take all these answers with a grain of salt, and use your best judgement for your project and circumstances. That being said, here's one potential alternative:
Beware of mocking hell:
The approach you've outlined will work: but it might not be best (or it might be, only you can decide). Typically the reason you're tempted to use mocks is because there's some dependency you're looking to break. Extract Interface is an okay pattern, but it's probably not resolving the core issue. I've leaned heavily on mocks in the past and have had situations where I really regret it. They have their place, but I try to use them as infrequently as possible, and with the lowest-level and smallest possible class. You can get into mocking hell, which you're about to enter since you have to reason about your mocks having mocks. Usually when this happens its because there's a inheritance/composition structure and the base/children share a dependency. If possible, you want to refactor so that the dependency isn't so heavily ingrained in your classes.
Isolating the "real" dependency:
A better pattern might be Parameterize Constructor (another Michael Feathers WEWLC pattern).
WLOG, lets say your rogue dependency is a database (maybe it's not a database, but the idea still holds). Maybe MyClass and MyOtherClass both need access to it. Instead of Extracting Interface for both of these classes, try to isolate the dependency and pass it in to the constructors for each class.
Example:
class MyClass {
public:
MyClass(...) : ..., db(new ProdDatabase()) {}; // Old constructor, but give it a "default" database now
MyClass(..., Database* db) : ..., db(db) {}; // New constructor
...
private:
Database* db; // Decide on semantics about owning a database object, maybe you want to have the destructor of this class handle it, or maybe not
// MyOtherClass* moc; //Maybe, depends on what you're trying to do
};
and
class MyOtherClass {
public:
// similar to above, but you might want to disallow this constructor if it's too risky to have two different dependency objects floating around.
MyOtherClass(...) : ..., db(new ProdDatabase());
MyOtherClass(..., Database* db) : ..., db(db);
private:
Database* db; // Ownership?
};
And now that we see this layout, it makes us realize that you might even want MyOtherClass to simply be a member of MyClass (depends what you're doing and how they're related). This will avoid mistakes in instantiating MyOtherClass and ease the burden of the dependency ownership.
Another alternative is to make the Database a singleton to ease the burden of ownership. This will work well for a Database, but in general the singleton pattern won't hold for all dependencies.
Pros:
Allows for clean (standard) dependency injection, and it tackles the core issue of isolating the true dependency.
Isolating the real dependency makes it so that you avoid mocking hell and can just pass the dependency around.
Better future proofed design, high reusability of the pattern, and likely less complex. The next class that needs the dependency won't have to mock themselves, instead they just rope in the dependency as a parameter.
Cons:
This pattern will probably take more time/effort than Extract Interface. In legacy systems, sometimes this doesn't fly. I've committed all sorts of sins because we needed to move a feature out...yesterday. It's okay, it happens. Just be aware of the design gotchas and technical debt you accrue...
It's also a bit more error prone.
Some general legacy tips I use (the things WEWLC doesn't tell you):
Don't get hell-bent about avoiding a dependency if you don't need to avoid it. This is especially true when working with legacy systems where refactorings are risky in general. Instead, you can have your tests call an actual database (or whatever the dependency is), but have the test suite connect to a small "test" database instead of the "prod" database. The cost of standing up a small test db is usually quite small. The cost of crashing prod because you goofed up a mock or a mock fell out of sync with reality is typically a lot higher. This will also save you a lot of coding.
Avoid mocks (especially heavy mocking) where possible. I am becoming more and more convinced as I age as a software engineer that mocks are mini-design smells. They are the quick and dirty: but usually illustrate a larger problem.
Envision the ideal API, and try to build what you envision. You can't actually build the ideal API, but imagine you can refactor everything instantly and have the API you desire. This is a good starting point for improving a legacy system, and make tradeoffs/sacrifices with your current design/implementation as you go.
HTH, good luck!
The first point to keep in mind is that there probably is no one way that's right and the others wrong--any answer is a matter of opinion as much as fact (though the opinions can be informed by fact).
That said, I'd urge at least a little caution against the use of inheritance for this case. Most such books/authors are oriented pretty heavily toward Java, where inheritance is treated as the Swiss army knife (or perhaps Leatherman) of techniques, used for every task where it might sort of come close to making a little sense, regardless of whether its really the right tool for the job or not. In C++, inheritance tends to be viewed much more narrowly, used only when/if/where there's nearly no alternative (and the alternative is to hand-roll what's essentially inheritance on your own anyway).
The primary unique feature of inheritance is run-time polymorphism. For example, we have a collection of (pointers to) objects, and the objects in the collection aren't all the same type (but are all related via inheritance). We use virtual functions to provide a common interface to the objects of the various types.
At least as I read things, that's not the case here at all though. In a given build, you'll deal with either mock objects or production objects, but you'll always know at compile time whether the objects in use are mock or production--you won't ever have a collection of a mixture of mock objects and production objects, and need to determine at run time whether a particular object is mock or production.
Assuming that's correct, inheritance is almost certainly the wrong tool for the job. When you're dealing with static polymorphism (i.e., the behavior is determined at compile time) there are better tools (albeit, ones Feather and company apparentlyy feel obliged to ignore, simply because Java fails to provide them).
In this case, it's pretty trivial to handle all the work at build time, without polluting your production code with any extra complexity at all. For one example, you can create a source directory with mock and production subdirectories. In the mock directory you have foo.cpp, bar.cpp and baz.cpp that implement the mock versions of classes Foo, Bar and Baz respectively. In the production directory you have production versions of the same. At build time, you tell the build tool whether to build the production or mock version, and it chooses the directory where it gets the source code based on that.
Semi-unrelated aside
I also note that you're using a shared_ptr as a parameter. This is yet another huge red flag. I find uses for shared_ptr to be exceptionally rare. The vast majority of times I've seen it used, it wasn't really what should have been used. A shared_ptr is intended for cases of shared ownership of an object--but most use seems to be closer to "I haven't bothered to figure out the ownership of this object". The shared_ptr isn't all that huge of a problem in itself, but it's usually a symptom of larger problems.

Dependency injection + full virtual vs interfaces

I quite often find myself creating interfaces that I am using just at the signature to inject a dependency, ending up with class AIface and class AImpl : public AIface. And quite often I never implement any other subclass of class AIface
Is there any advantage of this approach vs using directly the implementation with all public method virtual?
Longer Explanation:
Say we have a zoo with a cleaning service. We do TDD, and we want to be able to test the Zoo with a fake FeedingSvc, so we go for dependency injecton.
What is the difference between:
class FeedingSvcIface{
virtual void performFeeding() = 0;
} ;
class RoboticFeedingSvc: public FeedingSvcIface{
void performFeeding();
};
Class Zoo{
Zoo(FeedingSvcIface&);
//...
};
vs
class RoboticFeedingSvc{
virtual void performFeeding();
};
Class Zoo{
Zoo(RoboticFeedingSvc&);
//...
};
(And if ever needed, extract the interface in the future)
In terms of testing, the former seems easier.
I usually find natural to add interfaces when there is a I speak to a class that "crosses layers" but some times it is just about testing.
I know that in the future I might have to implement other types of FeedingSvcs but why doing the abstraction today if I don't really needed?,
I might split two classes just to encapsulate some logic.
The advantage of sticking to best practices, design patterns or other idioms is that although you make a bit of extra effort now, you gain more in the long run.
Imagine the scenario where you work in a team, with multiple developers, some experienced, some not.
You are the creator of the Zoo mechanism, but you decide, that for the time being, you will implement the Zoo on a KISS principle without adding the extra abstraction . You set yourself a mental note (or a even a nice little comment) stating that "If there shall be multiple distinct behaviors of the RoboticFeedingSvc there shall be Abstraction over the dependency injection !".
Now , because of your really awesome work, you get to go on a vacation and some junior developer will remain to mantain your code.
One of the tasks of the developer will be to introduce a ManualFeeding option and a hybrid option. How many ways to do this can you think about (with disregards to any coding principle) ?
Because you, the creator, didn't enforce the way the mechanism grows, the junior developer will look at your comment, add a "LoL u mad bro :) " comment , and then choose one of the following :
Create a base interface to be derived by other FeedingSvcs (you got lucky here)
Create a dependency injection to the RobotFeedingSvc using a strategy pattern (have some functors to be set in terms of how to feed something)
Make RobotFeedingSvc a composite between Feeder, Feeded, and some Action function
Make the RobotFeedingSvc a singleton factory (because singletons factories are awesome and fancy ) that somehow is used inside the Zoo to return the apropriate feeding technique (important thing here is that he used singleton and factory)
Create a templated version of the Zoo that takes a templated version of RobotFeedingSvc that is partially sepecialized according to given FeedingPolicy and Feeder (because he just bumped into templates, and templates should be used everywhere).
I guess we could sum up the story in fewers lines :
Making the initial effort to properly make the abstractions layer required in your application to make it scalable in terms of functionality will help other developers (including here future you ) to quickly understand the proper way to implement new features using the existing code instead of just hacking through it with some wild ideas.
Forcing your Zoo Class to take an interface instead of a concrete class is pretty much equivalent to leave a comment saying that new functionalities need to implement this interface.
Allowing a concrete class to be passed as parameter might switch focus on how to change the concrete class rather then implement something on top of it.
Another more technical reason would be the following :
He needs to add new functionality , but he's not allowed to change the Zoo implementation. What now ?

Single-use class

In a project I am working on, we have several "disposable" classes. What I mean by disposable is that they are a class where you call some methods to set up the info, and you call what equates to a doit function. You doit once and throw them away. If you want to doit again, you have to create another instance of the class. The reason they're not reduced to single functions is that they must store state for after they doit for the user to get information about what happened and it seems to be not very clean to return a bunch of things through reference parameters. It's not a singleton but not a normal class either.
Is this a bad way to do things? Is there a better design pattern for this sort of thing? Or should I just give in and make the user pass in a boatload of reference parameters to return a bunch of things through?
What you describe is not a class (state + methods to alter it), but an algorithm (map input data to output data):
result_t do_it(parameters_t);
Why do you think you need a class for that?
Sounds like your class is basically a parameter block in a thin disguise.
There's nothing wrong with that IMO, and it's certainly better than a function with so many parameters it's hard to keep track of which is which.
It can also be a good idea when there's a lot of input parameters - several setup methods can set up a few of those at a time, so that the names of the setup functions give more clue as to which parameter is which. Also, you can cover different ways of setting up the same parameters using alternative setter functions - either overloads or with different names. You might even use a simple state-machine or flag system to ensure the correct setups are done.
However, it should really be possible to recycle your instances without having to delete and recreate. A "reset" method, perhaps.
As Konrad suggests, this is perhaps misleading. The reset method shouldn't be seen as a replacement for the constructor - it's the constructors job to put the object into a self-consistent initialised state, not the reset methods. Object should be self-consistent at all times.
Unless there's a reason for making cumulative-running-total-style do-it calls, the caller should never have to call reset explicitly - it should be built into the do-it call as the first step.
I still decided, on reflection, to strike that out - not so much because of Jalfs comment, but because of the hairs I had to split to argue the point ;-) - Basically, I figure I almost always have a reset method for this style of class, partly because my "tools" usually have multiple related kinds of "do it" (e.g. "insert", "search" and "delete" for a tree tool), and shared mode. The mode is just some input fields, in parameter block terms, but that doesn't mean I want to keep re-initializing. But just because this pattern happens a lot for me, doesn't mean it should be a point of principle.
I even have a name for these things (not limited to the single-operation case) - "tool" classes. A "tree_searching_tool" will be a class that searches (but doesn't contain) a tree, for example, though in practice I'd have a "tree_tool" that implements several tree-related operations.
Basically, even parameter blocks in C should ideally provide a kind of abstraction that gives it some order beyond being just a bunch of parameters. "Tool" is a (vague) abstraction. Classes are a major means of handling abstraction in C++.
I have used a similar design and wondered about this too. A fictive simplified example could look like this:
FileDownloader downloader(url);
downloader.download();
downloader.result(); // get the path to the downloaded file
To make it reusable I store it in a boost::scoped_ptr:
boost::scoped_ptr<FileDownloader> downloader;
// Download first file
downloader.reset(new FileDownloader(url1));
downloader->download();
// Download second file
downloader.reset(new FileDownloader(url2));
downloader->download();
To answer your question: I think it's ok. I have not found any problems with this design.
As far as I can tell you are describing a class that represents an algorithm. You configure the algorithm, then you run the algorithm and then you get the result of the algorithm. I see nothing wrong with putting those steps together in a class if the alternative is a function that takes 7 configuration parameters and 5 output references.
This structuring of code also has the advantage that you can split your algorithm into several steps and put them in separate private member functions. You can do that without a class too, but that can lead to the sub-functions having many parameters if the algorithm has a lot of state. In a class you can conveniently represent that state through member variables.
One thing you might want to look out for is that structuring your code like this could easily tempt you to use inheritance to share code among similar algorithms. If algorithm A defines a private helper function that algorithm B needs, it's easy to make that member function protected and then access that helper function by having class B derive from class A. It could also feel natural to define a third class C that contains the common code and then have A and B derive from C. As a rule of thumb, inheritance used only to share code in non-virtual methods is not the best way - it's inflexible, you end up having to take on the data members of the super class and you break the encapsulation of the super class. As a rule of thumb for that situation, prefer factoring the common code out of both classes without using inheritance. You can factor that code into a non-member function or you might factor it into a utility class that you then use without deriving from it.
YMMV - what is best depends on the specific situation. Factoring code into a common super class is the basis for the template method pattern, so when using virtual methods inheritance might be what you want.
Nothing especially wrong with the concept. You should try to set it up so that the objects in question can generally be auto-allocated vs having to be newed -- significant performance savings in most cases. And you probably shouldn't use the technique for highly performance-sensitive code unless you know your compiler generates it efficiently.
I disagree that the class you're describing "is not a normal class". It has state and it has behavior. You've pointed out that it has a relatively short lifespan, but that doesn't make it any less of a class.
Short-lived classes vs. functions with out-params:
I agree that your short-lived classes are probably a little more intuitive and easier to maintain than a function which takes many out-params (or 1 complex out-param). However, I suspect a function will perform slightly better, because you won't be taking the time to instantiate a new short-lived object. If it's a simple class, that performance difference is probably negligible. However, if you're talking about an extremely performance-intensive environment, it might be a consideration for you.
Short-lived classes: creating new vs. re-using instances:
There's plenty of examples where instances of classes are re-used: thread-pools, DB-connection pools (probably darn near any software construct ending in 'pool' :). In my experience, they seem to be used when instantiating the object is an expensive operation. Your small, short-lived classes don't sound like they're expensive to instantiate, so I wouldn't bother trying to re-use them. You may find that whatever pooling mechanism you implement, actually costs MORE (performance-wise) than simply instantiating new objects whenever needed.

Is it a good practice to write classes that typically have only one public method exposed?

The more I get into writing unit tests the more often I find myself writing smaller and smaller classes. The classes are so small now that many of them have only one public method on them that is tied to an interface. The tests then go directly against that public method and are fairly small (sometimes that public method will call out to internal private methods within the class). I then use an IOC container to manage the instantiation of these lightweight classes because there are so many of them.
Is this typical of trying to do things in a more of a TDD manner? I fear that I have now refactored a legacy 3,000 line class that had one method in it into something that is also difficult to maintain on the other side of the spectrum because there is now literally about 100 different class files.
Is what I am doing going too far? I am trying to follow the single responsibility principle with this approach but I may be treading into something that is an anemic class structure where I do not have very intelligent "business objects".
This multitude of small classes would drive me nuts. With this design style it becomes really hard to figure out where the real work gets done. I am not a fan of having a ton of interfaces each with a corresponding implementation class, either. Having lots of "IWidget" and "WidgetImpl" pairings is a code smell in my book.
Breaking up a 3,000 line class into smaller pieces is great and commendable. Remember the goal, though: it's to make the code easier to read and easier to work with. If you end up with 30 classes and interfaces you've likely just created a different type of monster. Now you have a really complicated class design. It takes a lot of mental effort to keep that many classes straight in your head. And with lots of small classes you lose the very useful ability to open up a couple of key files, pick out the most important methods, and get an idea of what the heck is going on.
For what it's worth, though, I'm not really sold on test-driven design. Writing tests early, that's sensible. But reorganizing and restructuring your class design so it can be more easily unit tested? No thanks. I'll make interfaces only if they make architectural sense, not because I need to be able to mock up some objects so I can test my classes. That's putting the cart before the horse.
You might have gone a bit too far if you are asking this question. Having only one public method in a class isn't bad as such, if that class has a clear responsibility/function and encapsulates all logic concerning that function, even if most of it is in private methods.
When refactoring such legacy code, I usually try to identify the components in play at a high level that can be assigned distinct roles/responsibilities and separate them into their own classes. I think about which functions should be which components's responsibility and move the methods into that class.
You write a class so that instances of the class maintain state. You put this state in a class because all the state in the class is related.You have function to managed this state so that invalid permutations of state can't be set (the infamous square that has members width and height, but if width doesn't equal height it's not really a square.)
If you don't have state, you don't need a class, you could just use free functions (or in Java, static functions).
So, the question isn't "should I have one function?" but rather "what state-ful entity does my class encapsulate?"
Maybe you have one function that sets all state -- and you should make it more granular, so that, e.g., instead of having void Rectangle::setWidthAndHeight( int x, int y) you should have a setWidth and a separate setHeight.
Perhaps you have a ctor that sets things up, and a single function that doesIt, whatever "it" is. Then you have a functor, and a single doIt might make sense. E.g., class Add implements Operation { Add( int howmuch); Operand doIt(Operand rhs);}
(But then you may find that you really want something like the Visitor Pattern -- a pure functor is more likely if you have purely value objects, Visitor if they're arranged in a tree and are related to each other.)
Even if having these many small objects, single-function is the correct level of granularity, you may want something like a facade Pattern, to compose out of primitive operations, often-used complex operations.
There's no one answer. If you really have a bunch of functors, it's cool. If you're really just making each free function a class, it's foolish.
The real answer lies in answering the question, "what state am I managing, and how well do my classes model my problem domain?"
I'd be speculating if I gave a definite answer without looking at the code.
However it sounds like you're concerned and that is a definite flag for reviewing the code. The short answer to your question comes back to the definition of Simple Design. Minimal number of classes and methods is one of them. If you feel like you can take away some elements without losing the other desirable attributes, go ahead and collapse/inline them.
Some pointers to help you decide:
Do you have a good check for "Single Responsibility" ? It's deceptively difficult to get it right but is a key skill (I still don't see it like the masters). It doesn't necessarily translate to one method-classes. A good yardstick is 5-7 public methods per class. Each class could have 0-5 collaborators. Also to validate against SRP, ask the question what can drive a change into this class ? If there are multiple unrelated answers (e.g. change in the packet structure (parsing) + change in the packet contents to action map (command dispatcher) ) , maybe the class needs to be split. On the other end, if you feel that a change in the packet structure, can affect 4 different classes - you've run off the other cliff; maybe you need to combine them into a cohesive class.
If you have trouble naming the concrete implementations, maybe you don't need the interface. e.g. XXXImpl classes implmenting XXX need to be looked at. I recently learned of a naming convention, where the interface describes a Role and the implementation is named by the technology used to implement the role (or falling back to what it does). e.g. XmppAuction implements Auction (or SniperNotifier implements AuctionEventListener)
Lastly are you finding it difficult to add / modify / test existing code (e.g. test setup is long or painful ) ? Those can be signs that you need to go refactoring.