I have a problem, downloaded curl developemnt package but if i
add in my visual studio .lib file form this program fail with
0xC000007b on startup.
I trying download all complete source in this i can download simple vs6
project but without errors i convert it to visual studio 2010, i compile
this solution normally, libcurl with curl.exe working good but if i try
add to my project fresh compiled static libcurl library or libcurl dynamic
library i have this problem and i don't have ideas to debug it.
Anyone can help me?
That's STATUS_INVALID_IMAGE_FORMAT, Windows isn't happy about the DLL it needs to load. That's almost always caused by trying to load a 32-bit DLL in a 64-bit program. Or a 64-bit in a 32-bit program. If you converted this VB6 code to VB.NET then you probably need to force it to run in 32-bit mode. Project + Properties, Compile tab, scroll down, Advanced Compile Options, Target CPU = x86.
Install Microsoft Visual C++ 2010 Redistributable Package (x64) or (x86) depending on architecture of your computer.
It worked for me.
Related
When I compile a simple program:
#include <iostream>
using namespace std;
void main() {
cout << "Hello world!";
}
And tun the compiled .exe on another system without visual studio installed I receive the following error:
The Code execution cannot proceed because VCRUNTIME140.dll was not found. Reinstalling the program may fix the problem.
When I compile with cl.exe I receive no errors,
does anyone know a workaround to this without installing VCRUNTIME140.dll on the systems. (I've tested on multiple windows systems including a windows virtual machine)
I've encountered this problem before and there's a simple solution to it,
The missing .dll are a issue of static linking not missing packages (in most cases),
becuase visual studio 2019 comes pre-installed with what you need.
To fix:
go to your project properties (in project tab)
Select C/C++
Change the value of runtime library to "Multi-threaded debug (/MTd)"
This will cause the compiler to embed the runtime into the app.
The executable will be significantly bigger, but it will run without any need of runtime dlls.
Get the "Visual Studio 20xx VC++ Redistributable package" for your version of Visual Studio. Then run on the target machine to install.
Bottom of this page: https://visualstudio.microsoft.com/downloads/
Or bottom of this page for older versions of Visual Studio: https://visualstudio.microsoft.com/vs/older-downloads/
I've had the same problem, mainly because originally when compiling something with C++ and turning it into an exe file, it's still gonna be an exe file that depends on libraries from C++.
But according to asd plourgy, who had a good idea to change the value of the runtime library, I wanted to share with whoever seeks knowledge how I solved it:
Go to your Visual Studio Code and follow these steps:
Click on Project
Properties
Scroll out C/C++
All Options
runtime library
Change value to: "Multithreaded-DLL (/MD)".
And that should do the trick. Afterwards, you have to obviously
save
debug
create new(exe)
open cmd and run the exe to make sure it works.
My System is: Windows 10
Here are a few pictures to make the steps easier, it's in german though:
step1:
step2:
step3:
step4:
step5:
I am not so experienced with C++ and MS Visual Studio. I am currently having issue with releasing .exe and trying to run the program on different PC. In the program I'm using additional library (magick++). I've configured the Runtime Library in Visual Studio 2015 to Multi-threaded (/MT). I suppose, that with this configuration the .exe file should be running on different PCs, but when I try to run it, message with "CORE_RL_Magick++. dll is missing on this computer appears. Any idea, what might be wrong?
My second question is, if I would like to make a release with dynamic library /MD, how can I get the library to run it on different PC? Or do I have to install the library first (I mean if I have to install Imagemagick to the computer or is there some way I can get the nescessary library from the build in Visual Studio).
Thanks for every information.
Do you have CORE_RL_Magick++. dll in the path (including the directory that your exe program is running) somewhere on the computer that is failing.
The /MD and /MT commands effect what runtime is used, not what other libraries the program is dependant on.
So with /MT, it will compile a static version of the visual c libs into the exe, but if linked against the magic dll, it will still need that CORE_RL_Magick++. dll in order to run.
I think /MD is a better choice, for smaller size.
If you want to run program on other PC, you may need to install Visual Studio Redistributable (could be downloaded on Microsoft website) on the PC first.
Agree with Martin Zhai. I had this problem when attempting to run my program on another machine after upgrading to 2015. The DLL I wanted to use would not be found despite being local. Installing Visual C++ Redistributable for Visual Studio 2015 fixed this.
I am running Microsoft Visual Studio Express 2012 for Windows Desktop on a 64 bit machine with windows 8.
I create a completely new Win32 Console Application (in C++) and accept the default options. I then build and run the solution in both debug and release modes and it works all find and dandy. Next I configure the include and library directories for the dynamic SFML library. I link to the debug and release .lib files and put the debug and release .dll files in the proper directories. I then add some simple code which uses the library, build and run the application in debug mode and I get this error: "The program can't start because MSVCR100D.dll is missing from your computer. Try reinstalling the program to fix this problem." If I build and run the application in release mode it works with no errors. (And yes I have the redistributables installed 32 and 64 bit.) Now from what I understand and according to this thread that .dll file is for debugging only and is not included in the redistributable package (which would explain why it doesn't work in debug mode). The answer says that developers have it installed with visual studio by default. This is obviously not the case as evidence from the error and I've reinstalled visual studio and restarted my computer twice now.
In conclusion, how do I simply compile my solution in debug mode without getting this error?
I'm afraid someone will mark this as a duplicate so here we go:
LINK - "...you appear to be linking to the debug version of the runtime, it is not normal to distribute apps linked against the debug version of the runtime."
Doesn't pertain to me because I'm not distributing this app, just trying to run it in debug mode.
LINK - "I compiled my program using Microsoft visual c++ 2010 Express Edition and tried to run it on another machine that did not have the same compiler."
This person get's the error when he runs what hes compiled on a different computer, not when actually compiling the application.
LINK - "If you get this error for your release build..."
I dont.
LINK - "You can compile your project in "Release"..."
My project is not ready to be released therefore I should compile my project in debug mode.
MSVCR100D.dll is the dll for Visual Studio 10, so somewhere something is depending on it (the SFML dlls?). Whatever you compile (in debug mode) with Visual Studio 2012 will require MSVCR110D.dll, which you should have available on your machine as part of the installation.
I suggest you build SFML yourself on your own version of Visual Studio, it's pretty easy. In fact, the binaries available on the site as part of the SFML 2.0 RC are rather old and you'll do yourself a huge favor by building from the latest sources, as a lot of fixes and improvement were applied in the meantime.
(Also, definitely use 2.0 instead of 1.6. The site is rather misleading, but on the SFML forums virtually everyone will recommend you use the last version)
This message generally states that the dll is referred to directly or indirectly in your application and is missing.
The 'D' at the end show us this is the Debug version of the file, this is DLL file is provided with the Visual Studio 2010 installation. So the MSVCR100D.dll would be provided with the installation of Visual Studio 2010.
Of course, you could be missing other versions 2008 (MSVCR90D) 2010 (MSVCR100D) 2012 (MSVCR110D) or the 2013 (MSVCR120D), each dll is provided according to the Visual Studio version.
There are a few ways to solve this:
Check to be sure that you're compiling all the components of your
project in Release mode. If this does not solve the issue continue
to the next steps.
You could solve this locally by installing Visual Studio 2010 on your
machine. This is not what I would recommend, but it would surely
overcome the issue
You could also download the file from this third party website and
copy it to your projects bin:
http://www.dll-files.com/dllindex/dll-files.shtml?msvcr100d
This option is the LEAST recommended option.
Run dependency Walker and see what file depends on the MSVCR100D.dll
and the try and fix that file in order to break your dependency. You can download depends here: http://www.dependencywalker.com/
Check to be sure that you're project is linking the correct version of
the CRT and any other libraries you may be using (e.g., MFC, ATL,
etc.)
Note: Installing the redistributables alone will NOT solve this problem, since the redistributables only contain the release version of the file MSVCR100.dll (notice no 'D')
MSVCR100D is part of the 2010 Visual Studio package - indicating that some components of your system are compiled with the older version of Visual Studio, so you will need to install the Visual Studio 2010 version - you can probably still develop with the 2012 version, just as long as [parts of] the 2010 is on the machine.
Or you need to recompile some components that your application depends on to use the 2012 (msvcr110d) libraries - if you have all the source code, that would be my preferrred method.
There's an app that I use on an XP netbook for tuning a car. It was working just fine. Then I needed to make a simple modification (output to STDOUT instead of to file) so I got the source from the author.
My netbook doesn't have the space for a compiler. I have Visual Studio C++ 2008 on a Windows 7 desktop. I made the adjustments, compiled and tested on the desktop and it worked perfecty. So then I copied the executable to the netbook and it won't run
"This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem"
Original (precompiled) exe works fine. To rule out my changes, I compiled the source without the mods and it still didn't work. The executable works fine on the 7 machine as well as another Win Vista machine I tried.
So its obviously something with the XP machine and the way the executable is compiled. I really have no idea how this stuff works so I don't know what to try.
Couple of ideas:
As Keith said above this is DLL/manifest issue.
Get Visual Studio 2008 redistributable (for matching application platform) and install it on the netbook.
If this does not help: Use Dependency Walker to find out what other DLLs you are missing.
Its because a dependency / DLL compiled into your application doesn't exist on the platform you are running on.
Open windows event viewer and view the application log. There will be an entry for the error and the name of the DLL which is missing. Copy / Install that DLL on your target platform.
I would guess your vc runtime has changed with visual studio 2008 and you need to copy the latest version to your target platform. If you dont know where to get the dependency DLL, post the name here and we can see what we can do about it.
You can check your project settings and make sure to use a statically linked runtime instead of a DLL.
Project Settings, C/C++ -> Code Generation. Make sure you're using a runtime library that isn't a DLL. (So Multi-threaded Debug instead of Multi-threaded Debug DLL for example).
I've made a simple C++ program in VC++ 2008 Pro and it runs fine in the pc I used to develop it but when I run it in a pc without VC++ installed, it just gives me a
"This application has failed to start because the application configuration is incorrect"
error. I fixed this before by statically linking my project but now when I try to do /MT or /MTD , I get a slew of link errors and it just won't go...
I've also tried installing the vs 2008 redist package too, still doesn't work.
Check my answer here.
Essentially the C/C++ runtimes are now deployed as side-by-side win32 assemblies. The embedded manifest in the compiled EXE will determine what dlls it binds to from the C:\Windows\WinSxS folder.
One question: is this a release or debug build? I would try a release build to make sure it's not a debug runtime issue (which I believe won't be present on a PC that doesn't have visual studio on it).