I'm pulling an Atom feed from Confluence. Some of the links and images are relative to the domain (/), so when I consume the feed on a different website the images and links are broken.
Is it possible to convert all app relative links to absolute with xslt? Is there a better approach?
Here's a sample
You could use the value of the /feed/link/#href to build an absolute path for all of the relative paths by looking for ="/ within the text() nodes and replacing it with a full path.
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:atom="http://www.w3.org/2005/Atom">
<xsl:template match="atom:summary[#type='html']/text()" >
<xsl:call-template name="replace-string">
<xsl:with-param name="text" select="." />
<xsl:with-param name="replace" select="'="/'" />
<xsl:with-param name="with" select="concat('="', /atom:feed/atom:link/#href, '/')"/>
</xsl:call-template>
</xsl:template>
<!--recursive template that replaces string values -->
<xsl:template name="replace-string">
<xsl:param name="text"/>
<xsl:param name="replace"/>
<xsl:param name="with"/>
<xsl:choose>
<xsl:when test="contains($text,$replace)">
<xsl:value-of select="substring-before($text,$replace)"/>
<xsl:value-of select="$with"/>
<xsl:call-template name="replace-string">
<xsl:with-param name="text" select="substring-after($text,$replace)"/>
<xsl:with-param name="replace" select="$replace"/>
<xsl:with-param name="with" select="$with"/>
</xsl:call-template>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$text"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<!--identity template -->
<xsl:template match="#*|node()">
<xsl:copy>
<xsl:apply-templates select="#*|node()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
Related
How do you replace an xml value, for example:
<name>Linda O'Connel</name>
to:
<name>Linda O''Connel</name>
via XSLT?
I need this because I have to pass this value in a powershell command line and to other platforms since the "double single quote" is needed to escape the apostrophe/single quotes.
Assuming an XSLT 1.0 processor, you will need to use a recursive named template for this, e.g:
<xsl:template name="replace">
<xsl:param name="text"/>
<xsl:param name="searchString">'</xsl:param>
<xsl:param name="replaceString">''</xsl:param>
<xsl:choose>
<xsl:when test="contains($text,$searchString)">
<xsl:value-of select="substring-before($text,$searchString)"/>
<xsl:value-of select="$replaceString"/>
<!-- recursive call -->
<xsl:call-template name="replace">
<xsl:with-param name="text" select="substring-after($text,$searchString)"/>
<xsl:with-param name="searchString" select="$searchString"/>
<xsl:with-param name="replaceString" select="$replaceString"/>
</xsl:call-template>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$text"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
Example of call:
<xsl:template match="name">
<xsl:copy>
<xsl:call-template name="replace">
<xsl:with-param name="text" select="."/>
</xsl:call-template>
</xsl:copy>
</xsl:template>
You can also try out the following.
<xsl:variable name="temp">'</xsl:variable>
<name>
<xsl:value-of select="concat(substring-before(name,$temp),$temp,$temp,substring-after(name,$temp))"/>
</name>
(This question is a less simplified version of my problem. The more simplified version which was already answered can be found here. I'm posting this more complicated question due to a comment by michael.hor257k who suggested that there may be an alternative approach that could solve it - possibly using select in a loop, or possibly a completely different approach.)
I'd like to process an XML file, over whose format I have no control, to generate C++ code. I need to process functions defined in XML in several different ways to produce different parts of the code. As part of this I need to select a subset of function parameters that match a complicated criteria and pass this selection to several named templates; the named templates need to be able to access the original document.
This example creates a complex selection of C++ function parameters that do not have constant values (ie the same min and max), where the min and max may be decimal or hexadecimal, using the "GenerateNonFixedParameters" template. The parameters refer to enumerations which are located elsewhere in the document, and these definitions are referenced by the named template call "ListParameterValues".
There are two problems.
The creation of the variable "nonFixedParameters" does not use select. I cannot work out how to use select for such a complicated case (XSL 1.0), but maybe there is a way.
A copy of the nodes does not suffice, as the "ListParameterValues" template as it currently stands needs to operate on an original set of nodes from the document.
Example XSL with the locations of these two problems marked:
<?xml version="1.0" encoding="UTF-8" ?>
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output method="text" encoding="iso-8859-1" omit-xml-declaration="yes" />
<xsl:template match="/">
<xsl:for-each select="//function">
<!-- 1. This does not use 'select' therefore it does not work. This is XSL 1.0 so as="node()*" cannot be used. -->
<xsl:variable name="nonFixedParameters">
<xsl:call-template name="GenerateNonFixedParameters"/>
</xsl:variable>
<xsl:call-template name="ListParameterValues">
<xsl:with-param name="parameters" select="$nonFixedParameters"/>
</xsl:call-template>
</xsl:for-each>
</xsl:template>
<xsl:template name="ListParameterValues">
<xsl:param name="parameters"/>
<xsl:for-each select="$parameters">
<xsl:value-of select="#name"/>
<xsl:text>[</xsl:text>
<xsl:variable name="min">
<xsl:call-template name="ToNum">
<xsl:with-param name="hexOrNum" select="#min" />
</xsl:call-template>
</xsl:variable>
<xsl:variable name="max">
<xsl:call-template name="ToNum">
<xsl:with-param name="hexOrNum" select="#max" />
</xsl:call-template>
</xsl:variable>
<!-- 2. This must be executed in the context of a document node, therefore this does not work. -->
<xsl:for-each select="//enum[#name=current()/#enum]/value">
<xsl:if test="#val >= $min and #val <= $max">
<xsl:value-of select="#name"/>
<xsl:text> </xsl:text>
</xsl:if>
</xsl:for-each>
<xsl:text>] </xsl:text>
</xsl:for-each>
</xsl:template>
<xsl:template name="GenerateNonFixedParameters">
<xsl:for-each select="parameter">
<xsl:variable name="min">
<xsl:call-template name="ToNum">
<xsl:with-param name="hexOrNum" select="#min" />
</xsl:call-template>
</xsl:variable>
<xsl:variable name="max">
<xsl:call-template name="ToNum">
<xsl:with-param name="hexOrNum" select="#max" />
</xsl:call-template>
</xsl:variable>
<xsl:if test="$min != $max">
<!-- Here a copy is clearly the wrong approach! -->
<xsl:copy-of select="."/>
</xsl:if>
</xsl:for-each>
</xsl:template>
<xsl:template name="HexToNum">
<xsl:param name="hex" />
<xsl:param name="num" select="0"/>
<xsl:param name="msb" select="translate(substring($hex, 1, 1), 'abcdef', 'ABCDEF')"/>
<xsl:param name="value" select="string-length(substring-before('0123456789ABCDEF', $msb))"/>
<xsl:param name="result" select="16 * $num + $value"/>
<xsl:if test="string-length($hex) > 1">
<xsl:call-template name="HexToNum">
<xsl:with-param name="hex" select="substring($hex, 2)"/>
<xsl:with-param name="num" select="$result"/>
</xsl:call-template>
</xsl:if>
<xsl:if test="string-length($hex) <= 1">
<xsl:value-of select="$result"/>
</xsl:if>
</xsl:template>
<xsl:template name="ToNum">
<xsl:param name="hexOrNum" />
<xsl:if test="starts-with($hexOrNum, '0x')">
<xsl:call-template name="HexToNum">
<xsl:with-param name="hex" select="substring-after($hexOrNum, '0x')"/>
</xsl:call-template>
</xsl:if>
<xsl:if test="not(starts-with($hexOrNum, '0x'))">
<xsl:value-of select="$hexOrNum"/>
</xsl:if>
</xsl:template>
</xsl:transform>
Simple XML to feed the above:
<?xml version="1.0" encoding="UTF-8"?>
<body>
<dictionary>
<enum name="EnumName">
<value name="firstValue" val="1" />
<value name="secondValue" val="2" />
<value name="thirdValue" val="3" />
<value name="forthValue" val="4" />
<value name="fifthValue" val="5" />
</enum>
</dictionary>
<function name="FunctionOne">
<parameter name="p1" type="enum" enum="EnumName" min="2" max="0x4"/>
<parameter name="p2" type="enum" enum="EnumName" min="0x03" max="3"/>
</function>
</body>
Wanted output. Note that p1 has all names within [min..max] listed, but p2 has none listed because min and max have the same value.
p1[secondValue thirdValue forthValue ] p2[]
I think your stylesheet can be made to work with XSLT 1.0 if you use an extension function like exsl:node-set to convert your result tree fragment into a node-set and if you store the root node of the primary input tree into a global variable or parameter as then you will be able to compare nodes in your primary input document to nodes of the newly constructed, temporary tree.
Based on these suggestions the code would look like
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0" xmlns:exsl="http://exslt.org/common">
<xsl:output method="text" encoding="iso-8859-1" omit-xml-declaration="yes" />
<xsl:variable name="main-root" select="/"/>
<xsl:template match="/">
<xsl:for-each select="//function">
<!-- 1. Using exsl:node-set or similar you can convert that result tree fragment into a node set to process it further -->
<xsl:variable name="nonFixedParameters">
<xsl:call-template name="GenerateNonFixedParameters"/>
</xsl:variable>
<xsl:call-template name="ListParameterValues">
<xsl:with-param name="parameters" select="$nonFixedParameters"/>
</xsl:call-template>
</xsl:for-each>
</xsl:template>
<xsl:template name="ListParameterValues">
<xsl:param name="parameters"/>
<!-- <xsl:for-each xmlns:ms="urn:schemas-microsoft-com:xslt" select="ms:node-set($parameters)/parameter"> for MSXML or XslTransform -->
<xsl:for-each select="exsl:node-set($parameters)/parameter">
<xsl:value-of select="#name"/>
<xsl:text>[</xsl:text>
<xsl:variable name="min">
<xsl:call-template name="ToNum">
<xsl:with-param name="hexOrNum" select="#min" />
</xsl:call-template>
</xsl:variable>
<xsl:variable name="max">
<xsl:call-template name="ToNum">
<xsl:with-param name="hexOrNum" select="#max" />
</xsl:call-template>
</xsl:variable>
<!-- 2. This must be executed in the context of a document node, therefore using the global variable works. -->
<xsl:for-each select="$main-root//enum[#name=current()/#enum]/value">
<xsl:if test="#val >= $min and #val <= $max">
<xsl:value-of select="#name"/>
<xsl:text> </xsl:text>
</xsl:if>
</xsl:for-each>
<xsl:text>] </xsl:text>
</xsl:for-each>
</xsl:template>
<xsl:template name="GenerateNonFixedParameters">
<xsl:for-each select="parameter">
<xsl:variable name="min">
<xsl:call-template name="ToNum">
<xsl:with-param name="hexOrNum" select="#min" />
</xsl:call-template>
</xsl:variable>
<xsl:variable name="max">
<xsl:call-template name="ToNum">
<xsl:with-param name="hexOrNum" select="#max" />
</xsl:call-template>
</xsl:variable>
<xsl:if test="$min != $max">
<xsl:copy-of select="."/>
</xsl:if>
</xsl:for-each>
</xsl:template>
<xsl:template name="HexToNum">
<xsl:param name="hex" />
<xsl:param name="num" select="0"/>
<xsl:param name="msb" select="translate(substring($hex, 1, 1), 'abcdef', 'ABCDEF')"/>
<xsl:param name="value" select="string-length(substring-before('0123456789ABCDEF', $msb))"/>
<xsl:param name="result" select="16 * $num + $value"/>
<xsl:if test="string-length($hex) > 1">
<xsl:call-template name="HexToNum">
<xsl:with-param name="hex" select="substring($hex, 2)"/>
<xsl:with-param name="num" select="$result"/>
</xsl:call-template>
</xsl:if>
<xsl:if test="string-length($hex) <= 1">
<xsl:value-of select="$result"/>
</xsl:if>
</xsl:template>
<xsl:template name="ToNum">
<xsl:param name="hexOrNum" />
<xsl:if test="starts-with($hexOrNum, '0x')">
<xsl:call-template name="HexToNum">
<xsl:with-param name="hex" select="substring-after($hexOrNum, '0x')"/>
</xsl:call-template>
</xsl:if>
<xsl:if test="not(starts-with($hexOrNum, '0x'))">
<xsl:value-of select="$hexOrNum"/>
</xsl:if>
</xsl:template>
</xsl:transform>
The example is online at http://xsltransform.net/94hvTzi/1.
Let me show a different approach that actually selects and processes the original nodes, in their original context - as was discussed in the previous thread. Consider:
XSLT 1.0
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform" >
<xsl:output method="text" encoding="utf-8"/>
<xsl:template match="/">
<xsl:for-each select="body/function">
<xsl:call-template name="select-parameters">
<xsl:with-param name="input-set" select="parameter"/>
</xsl:call-template>
</xsl:for-each>
</xsl:template>
<xsl:template name="select-parameters">
<xsl:param name="input-set"/>
<xsl:param name="output-set" select="dummy-node"/>
<xsl:variable name="current-node" select="$input-set[1]" />
<xsl:choose>
<xsl:when test="$current-node">
<xsl:variable name="min">
<xsl:call-template name="ToNum">
<xsl:with-param name="hexOrNum" select="$current-node/#min" />
</xsl:call-template>
</xsl:variable>
<xsl:variable name="max">
<xsl:call-template name="ToNum">
<xsl:with-param name="hexOrNum" select="$current-node/#max" />
</xsl:call-template>
</xsl:variable>
<!-- recursive call -->
<xsl:call-template name="select-parameters">
<xsl:with-param name="input-set" select="$input-set[position() > 1]"/>
<xsl:with-param name="output-set" select="$output-set | $current-node[$min != $max]"/>
</xsl:call-template>
</xsl:when>
<xsl:otherwise>
<!-- call a template to process the currently selected node-set -->
<xsl:call-template name="process-parameters">
<xsl:with-param name="input-set" select="$output-set"/>
</xsl:call-template>
<!-- call more templates here, if required -->
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<xsl:key name="enum-by-name" match="enum" use="#name" />
<xsl:template name="process-parameters">
<xsl:param name="input-set"/>
<xsl:for-each select="$input-set">
<xsl:variable name="min">
<xsl:call-template name="ToNum">
<xsl:with-param name="hexOrNum" select="#min" />
</xsl:call-template>
</xsl:variable>
<xsl:variable name="max">
<xsl:call-template name="ToNum">
<xsl:with-param name="hexOrNum" select="#max" />
</xsl:call-template>
</xsl:variable>
<xsl:value-of select="concat(#name, '[')"/>
<xsl:for-each select="key('enum-by-name', #enum)/value[#val >= $min and #val <= $max]">
<xsl:value-of select="#name"/>
<xsl:text> </xsl:text>
</xsl:for-each>
<xsl:text>] </xsl:text>
</xsl:for-each>
</xsl:template>
<xsl:template name="HexToNum">
<xsl:param name="hex" />
<xsl:param name="num" select="0"/>
<xsl:param name="msb" select="translate(substring($hex, 1, 1), 'abcdef', 'ABCDEF')"/>
<xsl:param name="value" select="string-length(substring-before('0123456789ABCDEF', $msb))"/>
<xsl:param name="result" select="16 * $num + $value"/>
<xsl:if test="string-length($hex) > 1">
<xsl:call-template name="HexToNum">
<xsl:with-param name="hex" select="substring($hex, 2)"/>
<xsl:with-param name="num" select="$result"/>
</xsl:call-template>
</xsl:if>
<xsl:if test="string-length($hex) <= 1">
<xsl:value-of select="$result"/>
</xsl:if>
</xsl:template>
<xsl:template name="ToNum">
<xsl:param name="hexOrNum" />
<xsl:if test="starts-with($hexOrNum, '0x')">
<xsl:call-template name="HexToNum">
<xsl:with-param name="hex" select="substring-after($hexOrNum, '0x')"/>
</xsl:call-template>
</xsl:if>
<xsl:if test="not(starts-with($hexOrNum, '0x'))">
<xsl:value-of select="$hexOrNum"/>
</xsl:if>
</xsl:template>
</xsl:stylesheet>
The problem with this approach is that it works exactly as advertised; the nodes selected at the end of the selecting processes are the original, unmodified parameters. As a result, they still carry the mixture of decimal and hexadecimal values, and you must convert these again when processing the selected set.
So it might well be more worthwhile to pre-process the parameters by normalizing the values to a common base, then use the result (converted to a node-set) for the rest of the processing. I wouldn't spend so much effort at selecting those that meet the criteria - because once the values are consistent, the selection becomes trivial. If you like, I will post a demo showing that.
I am quite new to XSLT,
I have a source XML message, which in its simplified version looks something like this:
<?xml version='1.0' encoding='iso-8859-1'?>
<Message>
<Invalid>
<InvalidBody>
<SynchError>
<ErrorText>The value of %1 should not be %2.</ErrorText>
<ErrorParameter>
<!-- Error Parameter is %1 identifier -->
<ErrorParameterType>value</ErrorParameterType>
<ErrorParameterValue>someField</ErrorParameterValue>
</ErrorParameter>
<ErrorParameter>
<!-- Error Parameter is %2 identifier -->
<ErrorParameterType>value</ErrorParameterType>
<ErrorParameterValue>someValue</ErrorParameterValue>
</ErrorParameter>
</SynchError>
</InvalidBody>
</Invalid>
</Message>
Now, I would like to use XSLT 1.0 to extract the ErrorText string and substitute the parameters %1 and %2 with the corresponding ErrorParameter/ErrorParameterValue values. The number of parameters %1, %2, %3... cannot be known in advance, so the solution should be flexible enough to accommodate a variable number of parameters.
Is there any elegant way to do this?
So, after quite a lot of googling around and a healthy dose of headache, I came up with the following solution, which seems to work like a charm:
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:template match="/">
<xsl:variable name="err-text" select="/Message/Invalid/InvalidBody/SynchError/ErrorText" />
<xsl:variable name="param-count" select="count(/Message/Invalid/InvalidBody/SynchError/ErrorParameter)" />
<xsl:call-template name="replace-params">
<xsl:with-param name="position" select="$param-count"/>
<xsl:with-param name="source-text" select="$err-text" />
</xsl:call-template>
</xsl:template>
<xsl:template name="replace-params">
<xsl:param name="position"/>
<xsl:param name="source-text"/>
<xsl:choose>
<xsl:when test="$position = 0">
<xsl:value-of select="$source-text"/>
</xsl:when>
<xsl:otherwise>
<xsl:call-template name="replace-params">
<xsl:with-param name="position" select="$position - 1"/>
<xsl:with-param name="source-text">
<xsl:call-template name="string-replace-all">
<xsl:with-param name="text" select="$source-text" />
<xsl:with-param name="replace" select="concat('%', $position)" />
<xsl:with-param name="by" select="/Message/Invalid/InvalidBody/SynchError/ErrorParameter[$position]/ErrorParameterValue" />
</xsl:call-template>
</xsl:with-param>
</xsl:call-template>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<xsl:template name="string-replace-all">
<xsl:param name="text" />
<xsl:param name="replace" />
<xsl:param name="by" />
<xsl:choose>
<xsl:when test="contains($text, $replace)">
<xsl:value-of select="substring-before($text,$replace)" />
<xsl:value-of select="$by" />
<xsl:call-template name="string-replace-all">
<xsl:with-param name="text"
select="substring-after($text,$replace)" />
<xsl:with-param name="replace" select="$replace" />
<xsl:with-param name="by" select="$by" />
</xsl:call-template>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$text" />
</xsl:otherwise>
</xsl:choose>
</xsl:template>
</xsl:stylesheet>
I use the "string-replace-all" template as a substitute for the XSLT 2.0 replace() function, since I cannot exclude multiple occurrences of a single parameter.
The "replace-params" template is applied recursively on the original text, iterating backwards on the index of the set of ErrorParameters.
The way I have tackled similar problems is to create a named template that recurses through the string (text element of) <ErrorText> with each cycle picking out the first n% item, then dereferences the <ErrorParameter> to access the contents of that and store in a result, then snip off the n% item just process and calls itself to grab the next one. When there are no more %n items left, return the result.
Here's an example of that, this template basically counts comma-separated items in a parameter passed in on the first cycle called List, and returns a $Count when it's finished.
<xsl:template name="CountList">
<xsl:param name="List"/>
<xsl:param name="Count" select="0"/>
<xsl:choose>
<xsl:when test="contains($List,',') = false()">
<xsl:value-of select="$Count"/>
</xsl:when>
<xsl:otherwise>
<xsl:call-template name="CountList">
<xsl:with-param name="List">
<xsl:value-of select="substring-after($List,',')"/>
</xsl:with-param>
<xsl:with-param name="Count">
<xsl:value-of select="$Count + 1"/>
</xsl:with-param>
</xsl:call-template>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
You can try something like this. You can use a replace instead of 'substring-before' and 'after' if this function is supported.
<xsl:template match="SynchError">
<xsl:apply-templates select="ErrorParameter[1]">
<xsl:with-param name="text"><xsl:value-of select="ErrorText"/></xsl:with-param>
<xsl:with-param name="position">1</xsl:with-param>
</xsl:apply-templates>
</xsl:template>
<xsl:template match="ErrorParameter">
<xsl:param name="text"/>
<xsl:param name="position"/>
<xsl:apply-templates select="following::ErrorParameter">
<xsl:with-param name="position"><xsl:value-of select="number($position)+1"/></xsl:with-param>
<xsl:with-param name="text"><xsl:value-of select="concat(substring-before($text,concat('%',$position)),ErrorParameterValue,substring-after($text,concat('%',$position)))"/></xsl:with-param>
</xsl:apply-templates>
<xsl:if test="not(following::ErrorParameter)">
<xsl:value-of select="concat(substring-before($text,concat('%',$position)),ErrorParameterValue,substring-after($text,concat('%',$position)))"/>
</xsl:if>
</xsl:template>
</xsl:stylesheet>
Here's another way you could look at it:
XSLT 1.0
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
<xsl:template match="/">
<output>
<xsl:call-template name="merge">
<xsl:with-param name="string" select="Message/Invalid/InvalidBody/SynchError/ErrorText"/>
<xsl:with-param name="parameters" select="Message/Invalid/InvalidBody/SynchError/ErrorParameter"/>
</xsl:call-template>
</output>
</xsl:template>
<xsl:template name="merge">
<xsl:param name="string"/>
<xsl:param name="parameters"/>
<xsl:param name="flag" select="'%'"/>
<xsl:choose>
<xsl:when test="contains($string, $flag)">
<xsl:variable name="subsequent-char"
select="substring(translate(substring-after($string, $flag), '0123456789', ''), 1, 1)"/>
<xsl:variable name="i"
select="substring-before(substring-after($string, $flag), $subsequent-char)" />
<xsl:value-of select="substring-before($string, $flag)"/>
<xsl:value-of select="$parameters[number($i)]/ErrorParameterValue"/>
<!-- recursive call -->
<xsl:call-template name="merge">
<xsl:with-param name="string" select="substring-after($string, concat($flag, $i))"/>
<xsl:with-param name="parameters" select="$parameters"/>
</xsl:call-template>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$string"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
</xsl:stylesheet>
There is XML document:
<data>how;many;i;can;tell;you</data>
Need to get XML using XSLT version 1:
<manydata>
<onedata>how</onedata>
<onedata>many</onedata>
<onedata>i</onedata>
<onedata>can</onedata>
<onedata>tell</onedata>
<onedata>you</onedata>
</manydata>
How I can do it?
UPDATE:
Output format must be XML.
This recursive solution is probably one of the shortest possible:
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output omit-xml-declaration="yes" indent="yes"/>
<xsl:template match="data">
<manydata><xsl:apply-templates/></manydata>
</xsl:template>
<xsl:template match="text()" name="tokenize">
<xsl:param name="pText" select="."/>
<xsl:if test="string-length($pText)">
<onedata>
<xsl:value-of select=
"substring-before(concat($pText,';'),';')"/>
</onedata>
<xsl:call-template name="tokenize">
<xsl:with-param name="pText" select=
"substring-after($pText,';')"/>
</xsl:call-template>
</xsl:if>
</xsl:template>
</xsl:stylesheet>
when this transformation is applied on the provided XML document;
<data>how;many;i;can;tell;you</data>
the wanted, correct result is produced:
<manydata>
<onedata>how</onedata>
<onedata>many</onedata>
<onedata>i</onedata>
<onedata>can</onedata>
<onedata>tell</onedata>
<onedata>you</onedata>
</manydata>
<xsl:template match="data">
<manydata>
<!--
empty <manydata/> will be generated,
if <data/> without child text()
-->
<xsl:apply-templates select="text()"/>
</manydata>
</xsl:template>
<xsl:template match="data/text()">
<!-- start point for recursion -->
<xsl:call-template name="tokenize-string">
<xsl:with-param name="separator" select="';'"/>
<xsl:with-param name="string" select="text()"/>
</xsl:call-template>
</xsl:template>
<xsl:template name="tokenize-string">
<xsl:param name="separator"/>
<xsl:param name="string"/>
<xsl:variable name="string-before-separator"
select="substring-before( $string, $separator )"/>
<onedata>
<xsl:choose>
<!-- if $separator presents in $string take first piece -->
<xsl:when test="$string-before-separator">
<xsl:value-of select="$string-before-separator"/>
</xsl:when>
<!-- take whole $string, if no $separator in the $string -->
<xsl:otherwise>
<xsl:value-of select="$string"/>
</xsl:otherwise>
</xsl:choose>
</onedata>
<!-- recursive call, if separator was found -->
<xsl:if test="$string-before-separator">
<xsl:call-template name="tokenize-string">
<xsl:with-param name="separator" select="$separator"/>
<xsl:with-param name="string"
select="substring-after( $string, $separator )"/>
</xsl:call-template>
</xsl:if>
</xsl:template>
Try this:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="data">
<xsl:element name="manydata">
<xsl:call-template name="splitsemicolons">
<xsl:with-param name="text" select="text()" />
</xsl:call-template>
</xsl:element>
</xsl:template>
<xsl:template name="splitsemicolons">
<xsl:param name="text" />
<xsl:choose>
<xsl:when test="contains($text,';')">
<xsl:element name="onedata">
<xsl:value-of select="substring-before($text,';')" />
</xsl:element>
<xsl:call-template name="splitsemicolons">
<xsl:with-param name="text" select="substring-after($text,';')" />
</xsl:call-template>
</xsl:when>
<xsl:otherwise>
<xsl:element name="onedata">
<xsl:value-of select="$text" />
</xsl:element>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
</xsl:stylesheet>
This uses a named template that is called recursively, each time outputting what's before the first ;, and calling itself with everything after the first ;. If there isn't a ;, it just outputs whatever's left as-is.
You can use the XSLT extension library to get the tokenize function. Here is how the final code will look like:
<xsl:template match="/">
<manydata>
<xsl:for-each select="str:tokenize(data, ';')">
<xsl:value-of select="." />
</xsl:for-each>
</manydata>
</xsl:template>
</xsl:stylesheet>
Please note you will have to import the extension library into you XSLT using:
<xsl:import href="path/str.xsl" />
before you use the library functions.
I've got a SharePoint problem which I need some help with. I'm creating some custom ItemStyles to format the output of a Content Query Webpart (CQWP) but I need to insert a "view all" button into the output.
View all needs to point to:
http://www.site.com/subsite/doclibrary1/Forms/AllItems.aspx
All the individual files in the document library have the link of:
http://www.site.com/subsite/doclibrary1/FileName.doc
So what I need is some XSL functions to strip FileName.doc from the end of the string.
I've tried using substring-before($variable, '.') to get rid of the .doc, but I then need to find a way to use substring-after to search for the LAST forward slash in the series and truncate the orphaned filename.
Using #Mads Hansen's post, this is the code which resolved the problem:
Template in ItemStyle.xsl
<xsl:template name="ImpDocs" match="Row[#Style='ImpDocs']" mode="itemstyle">
<xsl:variable name="SafeLinkUrl">
<xsl:call-template name="OuterTemplate.GetSafeLink">
<xsl:with-param name="UrlColumnName" select="'LinkUrl'"/>
</xsl:call-template>
</xsl:variable>
<xsl:variable name="ViewAllLink">
<xsl:call-template name="OuterTemplate.getCleanURL">
<xsl:with-param name="path" select="#LinkUrl"/>
</xsl:call-template>
</xsl:variable>
<div class="DocViewAll">
View All
<!--Any other code you need for your custom ItemStyle here-->
</div>
</xsl:template>
Template in ContentQueryMain.xsl
<xsl:template name="OuterTemplate.getCleanURL">
<xsl:param name="path" />
<xsl:choose>
<xsl:when test="contains($path,'/')">
<xsl:value-of select="substring-before($path,'/')" />
<xsl:text>/</xsl:text>
<xsl:call-template name="OuterTemplate.getCleanURL">
<xsl:with-param name="path" select="substring-after($path,'/')" />
</xsl:call-template>
</xsl:when>
<xsl:otherwise />
</xsl:choose>
</xsl:template>
Executing this stylesheet produces: http://www.site.com/subsite/doclibrary1/
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
version="1.0">
<xsl:template match="/">
<xsl:call-template name="getURL">
<xsl:with-param name="path">http://www.site.com/subsite/doclibrary1/FileName.doc</xsl:with-param>
</xsl:call-template>
</xsl:template>
<xsl:template name="getURL">
<xsl:param name="path" />
<xsl:choose>
<xsl:when test="contains($path,'/')">
<xsl:value-of select="substring-before($path,'/')" />
<xsl:text>/</xsl:text>
<xsl:call-template name="getURL">
<xsl:with-param name="path" select="substring-after($path,'/')" />
</xsl:call-template>
</xsl:when>
<xsl:otherwise />
</xsl:choose>
</xsl:template>
</xsl:stylesheet>
The getURL template makes a recursive call to itself when there are "/" characters in the string. While there are still "/" characters, it spits out the values before the slash, and then invokes itself. When it reaches the last one, it stops.
The given solutions are not able to handle url's without filename and extension at the end (Path to folder)
I changed the ideas above to include this aswell...
<xsl:template name="getPath">
<xsl:param name="url" />
<xsl:choose>
<xsl:when test="contains($url,'/')">
<xsl:value-of select="substring-before($url,'/')" />
<xsl:text>/</xsl:text>
<xsl:call-template name="getPath">
<xsl:with-param name="url" select="substring-after($url,'/')" />
</xsl:call-template>
</xsl:when >
<xsl:otherwise>
<xsl:if test="not(contains($url,'.'))">
<xsl:value-of select="$url" />
</xsl:if>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
Btw. Why does MS still not support XSLT 2.0!, i saw people complainin bout that back in 2007 -.-'
If you are using XSLT 2.0 (or more specifically, XPath 2.0), then you should be able to use the replace function, using a regular expression to capture the substring before the last "/":
http://www.w3.org/TR/xpath-functions/#func-replace
Unfortunately, "replace" did not exist in XSLT 1.0, so it depends on what XSLT processor you are using as to whether this will work for you.
This stylesheet:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="url">
<xsl:variable name="vReverseUrl">
<xsl:call-template name="reverse"/>
</xsl:variable>
<xsl:call-template name="reverse">
<xsl:with-param name="pString"
select="substring-after($vReverseUrl,'/')"/>
</xsl:call-template>
</xsl:template>
<xsl:template name="reverse">
<xsl:param name="pString" select="."/>
<xsl:if test="$pString">
<xsl:call-template name="reverse">
<xsl:with-param name="pString" select="substring($pString,2)"/>
</xsl:call-template>
<xsl:value-of select="substring($pString,1,1)"/>
</xsl:if>
</xsl:template>
</xsl:stylesheet>
With this input:
<url>http://www.site.com/subsite/doclibrary1/FileName.doc</url>
Output:
http://www.site.com/subsite/doclibrary1
One line XPath 2.0:
string-join(tokenize(url,'/')[position()!=last()],'/')
See my answer to this question and use the same technique (#Alejandro's answer essentially copies this).