I have some text like this:
dagGeneralCodes$_ctl1$_ctl0
Some text
dagGeneralCodes$_ctl2$_ctl0
Some text
dagGeneralCodes$_ctl3$_ctl0
Some text
dagGeneralCodes$_ctl4$_ctl0
Some text
I want to create a regular expression that extracts the last occurrence of dagGeneralCodes$_ctl[number]$_ctl0 from the text above.
the result should be: dagGeneralCodes$_ctl4$_ctl0
Thanks in advance
Wael
This should do it:
.*(dagGeneralCodes\$_ctl\d\$_ctl0)
The .* at the front is greedy so initially it will grab the entire input string. It will then backtrack until it finds the last occurrence of the text you want.
Alternatively you can just find all the matches and keep the last one, which is what I'd suggest.
Also, specific advice will probably need to be given depending on what language you're doing this in. In Java, for example, you will need to use DOTALL mode to . matches newlines because ordinarily it doesn't. Other languages call this multiline mode. Javascript has a slightly different workaround for this and so on.
You can use:
[\d\D]*(dagGeneralCodes\$_ctl\d+\$_ctl0)
I'm using [\d\D] instead of . to make it match new-line as well. The * is used in a greedy way so that it will consume all but the last occurrence of dagGeneralCodes$_ctl[number]$_ctl0.
I really like using this Regular Expression Cheatsheet; it's free, a single page, and printed, fits on my cube wall.
Related
I have a project that demands extracting data from XML files (values inside the <Number>... </Number> tag), however, in my regular expression, I haven't been able to extract lines that had multiple data separated by a newline, see the below example:
As you can see above, I couldn't replicate the multiple lines detection by my regular expression.
If you are using a script somewhere, your first plan should be to use a XML parser. Almost every language has one and it should be far more accurate compared to using regex. However, if you just want to use regex to search for strings inside npp, then you can use \s+ to capture multiple new lines:
<Number>(\d+\s)+<\/Number>
https://regex101.com/r/MwvBxz/1
I'm not sure I fully understand what you are trying to do so if this doesn't do it then let me know what you are going for.
You can use this find+replace combo to remove everything which is not a digit in between the <Number> tag:
Find:
.*?<Number>(.*?)<\/Number>.*
Replace:
$1
finally i was able to find the right regular expression, I'll leave it below if anyone needs it:
<Type>\d</Type>\n<Number>(\d+\n)+(\d+</Number>)
Explanation:
\d: Shortcut for digits, same as [1-9]
\n: Newline.
+: Find the previous element 1 to many times.
Have a good day everybody,
After giving it some more thought I decided to write a second answer.
You can make use of look arounds:
(?<=<Number>)[\d\s]+(?=<\/Number>)
https://regex101.com/r/FiaTKD/1
I am searching through a 1.5 million line Premiere Pro project for any text that matches one of my audio filters and is set to mono.
Text that I am searching for begins with the <ChannelType> tag and ends with the <FilterMatchName>Tags. So it would looks like this
<ChannelType>0</ChannelType>
<FrameRate>5292000</FrameRate>
</AudioComponent>
<FilterPreset>0</FilterPreset>
<OpaqueData Encoding="base64" Checksum="53060659">AAAAAD8L8lo+AUr+Pac1NjwTmoUAAAAAP0uQDD37nIg9ui6MPjwU5j+AAAA+C/JaAAAAAD8qqqsAAAAAP4AAAD92L8w9py8FAAAAAHNvZnQgY29tcHJlc3Npb24AIiBkZWZhdWx0PSIwIiBzdGVwPSIxIiBtaW49IjAiIG1heD0iMSIvPgoJICA8Zmw=</OpaqueData>
<FilterIndex>-1</FilterIndex>
<FilterMatchName>1094998321 Dynamics1</FilterMatchName>
If I were in a Word doc, I would just do a find as
<ChannelType>0</ChannelType>*<FilterMatchName>1094998321 Dynamics1</FilterMatchName>
I am terrible with Regex. I was hoping someone could help me out. Everything I have tried either doesn't match anything, or matches EVERYTHING in the document. I am using Notepad++.
Since you are working in Notepad++, you have access to PCRE regular expressions. This one will get all the text between <ChannelType> and </FilterMatchName>
(?s)<ChannelType>.*?</FilterMatchName>
the (?s) allows the . to match newline characters
After matching <ChannelType>, the .*? lazily matches all characters up to...
the closing </FilterMatchName>, which we match.
Let me know if you have any questions. :)
What type of regular expressions are you using (which language/library)?
Basically you can use .* instead of * in regular expressions. IF your text is long though, it's better to use a Reluctant quantifier[1] if your re implementation allows it.
This is a good site with comparison of different re implementations and tutorials:
http://www.regular-expressions.info
[1] http://docs.oracle.com/javase/tutorial/essential/regex/quant.html
I'm terrible at regex and need to remove everything from a large portion of text except for a certain variable declaration that occurs numerous times, id like to remove everything except for instances of mc_gross=anyint.
Generally we'd need to use "negative lookarounds" to find everything but a specified string. But these are fairly inefficient (although that's probably of little concern to you in this instance), and lookaround is not supported by all regex engines (not sure about notepad++, and even then probably depends on the version you're using).
If you're interested in learning about that approach, refer to How to negate specific word in regex?
But regardless, since you are using notepad++, I'd recommend selecting your target, then inverting the selection.
This will select each instance, allowing for optional white space either side of the '=' sign.
mc_gross\s*=\s*\d+
The following answer over on super user explains how to use bookmarks in notepad++ to achieve the "inverse selection":
https://superuser.com/questions/290247/how-to-delete-all-line-except-lines-containing-a-word-i-need
Substitute the regex they're using over there, with the one above.
You could do a regular expression replace of ^.*\b(mc_gross\s*=\s*\d+)\b.*$ with \1. That will remove everything other than the wanted text on each line. Note that on lines where the wanted text occurs two or more times, only one occurrence will be retained. In the search the ^.*\b matches from start-of-line to a word boundary before the wanted text; the \b.*$ matches everything from a word boundary after the wanted text until end of line; the round brackets capture the wanted text for the replacement text. If text such as abcmc_gross=13def should be matched and retained as mc_gross=13 then delete the \bs from the search.
To remove unwanted lines do a regular expression search for ^mc_gross\s*=\s*\d+$ from the Mark tab, tick Bookmark line and click Mark all. Then use Menu => Search => Bookmark => Remove unmarked lines.
Find what: [\s\S]*?(mc_gross=\d+|\Z)
Replace with: \1
Position the cursor at the start of the text then Replace All.
Add word boundaries \b around mc_gross=\d+ if you think it's necessary.
I got a string like this:
PREFIX-('STRING WITH SPACES TO REPLACE')
and i need this:
PREFIX-('STRING_WITH_SPACES_TO_REPLACE')
I'm using Notepad++ for the Regex Search and Replace, but i'm shure every other Editor capable of regex replacements can do it to.
I'm using:
PREFIX-\('(.*)(\s)(.*)'\)
for search and
PREFIX-('\1_\3')
for replace
but that replaces only one space from the string.
The regex search feature in Notepad++ is very, very weak. The only way I can see to do this in NPP is to manually select the part of the text you want to work on, then do a standard find/replace with the In selection box checked.
Alternatively, you can run the document through an external script, or you can get a better editor. EditPad Pro has the best regex support I've ever seen in an editor. It's not free, but it's worth paying for. In EPP all I had to do was this:
search: ((?:PREFIX-\('|\G)[^\s']+)\s+
replace: $1_
EDIT: \G matches the position where the previous match ended, or the beginning of the input if there was no previous match. In other words, the first time you apply the regex, \G acts like \A. You can prevent that by adding a negative lookahead, like so:
((?:PREFIX-\('|(?!\A)\G)[^\s']+)\s+
If you want to prevent a match at the very beginning of the text no matter what it starts with, you can move the lookahead outside the group:
(?!\A)((?:PREFIX-\('|\G)[^\s']+)\s+
And, just in case you were wondering, a lookbehind will work just as well as a lookahead:
((?:PREFIX-\('|(?<!\A)\G)[^\s']+)\s+
You have to keep matching from the beggining of the string untill you can match no more.
find /(PREFIX-\('[^\s']*)\s([^']*'\))/
replace $1_$2
like: while (/(PREFIX-\('[^\s']*)\s([^']*'\))/$1_$2/) {}
How about using Replace all for about 20 times? Or until you're sure no string contains more spaces
Due to nature of regex, it's not possible to do this in one step by normal regular expression.
But if I be in your place, I do such replaces in several steps:
find such patterns and mark them with special character
(Like replacing STRING WITH SPACES TO REPLACE with #STRING WITH SPACES TO REPLACE#
Replace #([^#\s]*)\s to #\1_ server times.
Remove markers!
I studied a little the regex tool in Notepad++ because I didn't know their possibilities.
I conclude that they aren't powerful enough to do what you want.
Your are obliged to learn and use a programming language having a real regex capability. There are a number of them. Personnaly, I use Python. It would take 1 mn to do what you want with it
You'd have to run the replace several times for each space but this regex will work
/(?<=PREFIX-\(')([^\s]+)\s+/g
Replace with
\1_ or $1_
See it working at http://refiddle.com/10z
I just stumbled on a case where I had to remove quotes surrounding a specific regex pattern in a file, and the immediate conclusion I came to was to use vim's search and replace util and just escape each special character in the original and replacement patterns.
This worked (after a little tinkering), but it left me wondering if there is a better way to do these sorts of things.
The original regex (quoted): '/^\//' to be replaced with /^\//
And the search/replace pattern I used:
s/'\/\^\\\/\/'/\/\^\\\/\//g
Thanks!
You can use almost any character as the regex delimiter. This will save you from having to escape forward slashes. You can also use groups to extract the regex and avoid re-typing it. For example, try this:
:s#'\(\\^\\//\)'#\1#
I do not know if this will work for your case, because the example you listed and the regex you gave do not match up. (The regex you listed will match '/^\//', not '\^\//'. Mine will match the latter. Adjust as necessary.)
Could you avoid using regex entirely by using a nice simple string search and replace?
Please check whether this works for you - define the line number before this substitute-expression or place the cursor onto it:
:s:'\(.*\)':\1:
I used vim 7.1 for this. Of course, you can visually mark an area before (onto which this expression shall be executed (use "v" or "V" and move the cursor accordingly)).