I am searching through a 1.5 million line Premiere Pro project for any text that matches one of my audio filters and is set to mono.
Text that I am searching for begins with the <ChannelType> tag and ends with the <FilterMatchName>Tags. So it would looks like this
<ChannelType>0</ChannelType>
<FrameRate>5292000</FrameRate>
</AudioComponent>
<FilterPreset>0</FilterPreset>
<OpaqueData Encoding="base64" Checksum="53060659">AAAAAD8L8lo+AUr+Pac1NjwTmoUAAAAAP0uQDD37nIg9ui6MPjwU5j+AAAA+C/JaAAAAAD8qqqsAAAAAP4AAAD92L8w9py8FAAAAAHNvZnQgY29tcHJlc3Npb24AIiBkZWZhdWx0PSIwIiBzdGVwPSIxIiBtaW49IjAiIG1heD0iMSIvPgoJICA8Zmw=</OpaqueData>
<FilterIndex>-1</FilterIndex>
<FilterMatchName>1094998321 Dynamics1</FilterMatchName>
If I were in a Word doc, I would just do a find as
<ChannelType>0</ChannelType>*<FilterMatchName>1094998321 Dynamics1</FilterMatchName>
I am terrible with Regex. I was hoping someone could help me out. Everything I have tried either doesn't match anything, or matches EVERYTHING in the document. I am using Notepad++.
Since you are working in Notepad++, you have access to PCRE regular expressions. This one will get all the text between <ChannelType> and </FilterMatchName>
(?s)<ChannelType>.*?</FilterMatchName>
the (?s) allows the . to match newline characters
After matching <ChannelType>, the .*? lazily matches all characters up to...
the closing </FilterMatchName>, which we match.
Let me know if you have any questions. :)
What type of regular expressions are you using (which language/library)?
Basically you can use .* instead of * in regular expressions. IF your text is long though, it's better to use a Reluctant quantifier[1] if your re implementation allows it.
This is a good site with comparison of different re implementations and tutorials:
http://www.regular-expressions.info
[1] http://docs.oracle.com/javase/tutorial/essential/regex/quant.html
Related
I have the following string:
https://www.google.com/today/sunday/abcde2.hopeho.3345GETD?weatherType=RAOM&...
https://www.google.com/today/monday/jbkwe3.ho4eho.8495GETD?weatherType=WHTDSG&...
I'd like to extract jbkwe3.ho4eho.8495GETD or abcde2.hopeho.3345GETD. Anything between the {weekday}/ and the ?weatherType=.
I've tried (?<=sunday\/)$.*?(?=\?weatherType=) but it only works for the first line and I want to make it applicable to all strings regardless the value of {weekday}.
I tried (?<=\/.*\/)$.*?(?=\?weatherType=) but it didn't work. Could anyone familiar with Regex can lend some help? Thank you!
[Update]
I'm new to regex but I was experimenting it on sublime text editor via the "find" functionality which I think should be PCRE (according to this post)
Try this regex:
(?:sun|mon|tues|wednes|thurs|fri|satur)day\/\K[^?]+(?=\?weatherType)
Click for Demo
Link to Code
Explanation:
(?:sun|mon|tues|wednes|thurs|fri|satur)day - matches the day of a week i.e, sunday,monday,tuesday,wednesday,thursday,friday,saturday
\/ - matches /
\K - unmatches whatever has been matched so far and pretends that the match starts from the current position. This can be used for the PCRE.
[^?]+ - matches 1 or more occurences of any character that is not a ?
(?=\?weatherType) - the above subpattern[^?]+ will match all characters that are not ? until it reaches a position which is immediately followed by a ? followed by weatherType
To make the match case-insensitive, you can prepend the regex with (?i) as shown here
In the examples given, you actually only need to grab the characters between the last forward slash ("/") and the first question mark ("?").
You didn't mention what flavor regex (ie, PCRE, grep, Oracle, etc) you're using, and the actual syntax will vary depending on this, but in general, something like the following (Perl) replacement regex would handle the examples given:
s/.*\/([^?]*)\?.*/$1/gm
There are other (and more efficient) ways, but this will do the job.
I am having an issue with trying to figure out how to insert some text after I perform a regex search. I know there is a replace function, but I am not looking for that option, just inserting. The text editor I am using is Notepad2, but I am willing to try this in other text editors.
Here is the example that I have.
TEST|Test2|Test3|Test4
This is what I am looking for
Test|Test2|PrefixTest3|Test4
Notice that I am trying to insert the the phrase "Prefix" after the 2nd pipe and leave everything else alone.
I can successfully query the result by using this regex:
^[^|]*\|[^|]*|
But then I do not know how I can retain everything prior and after the search point. Any ideas?
You could simply use \K inorder to discard the previously matched characters.
^[^|]*\|[^|]*\|\K
Then replace the match with the string prefix.
DEMO
You may easily do that in Notepad2 using the regex-based Replace feature.
Find: ^\([^|]*|[^|]*|\)
Replace: \1Prefix
Details:
^ - start of a line (Notepad2 never overflows line boundaries!)
\([^|]*|[^|]*|\) - Capturing group 1 matching a sequence of:
[^|]* - zero or more chars other than |
| - a literal (yes, no escaping is necessary, both escaped and unescaped | match a literal |) pipe symbol
[^|]*| - see above, gets to the second |.
The replacement contains a \1 backreference that inserts what was captured with the capturing group 1.
NOTE that Notepad2 regex engine is very limited. Here is what the Notepad2 documentation says:
Notepad2 supports only a limited subset of regular expressions, as provided by built-in engine of the Scintilla source code editing component. The advantage is that it has a very small footprint. There's currently no plans to integrate a more advanced regular expressions engine, but this may be an option for future development.
Note: Regular expression search is limited to single lines, only.
Also, you may refer to the inline comments inside Scintilla RESearch.cxx file describing the supported syntax. Bear in mind that the regex type used in the Notepad2 S&R tool is that of POSIX and not all of the described Scintilla regex features will work in the tool.
Note that Notepad2 does not seem to support alternation and limiting quantifiers (similar to Lua patterns), but \w matches Unicode letters together with ASCII ones. Sadly, I could not make ? quantifier work.
^([^|]*\|[^|]*\|)
Try this.Replace by $1prefix.See demo.Just capture the first group and then use it for replace.The first group can be accessed by $1.
http://regex101.com/r/pQ9bV3/11
Apologies in advance for the confusing title. My issue is as follows, I have the following text in about 600 files:
$_REQUEST['FOO']
I would like to replace it with the following:
$this->input->post('FOO')
To clarify, I am matching against the following:
$_REQUEST any number of A-Za-z\d followed by a ]
and replacing it with:
$this->input->post( the alphanumeric word from above followed by a )
Or in general:
Anchor token TEXT TO KEEP end anchor token
This differs from standard find/replace as I want to retain text inside of two word boundaries.
Is this functionality present in any text editors (Eclipse,np++,etc). Or am I going to need to write some type of program to parse these 600 files to make the replacement?
s/\$__REQUEST\[(.*?)]/$this->input->post(\1)/
The .*? will match everything from [ to the first ] rather than the last although it's unlikely that it will matter in this case.
By the way the PHP superglobal is $_REQUEST rather than $__REQUEST
You can do this in Notepad++ using regular expressions. Replace
\$_REQUEST\['([^']*)'\]
with
$this->input->post('$1')
If you ever have double-quotes too, you can do use a more complex expression to handle both cases, though I'm not sure Notepad++ supports backreferences; replace
\$_REQUEST\[(['"])(.*?)\1\]
with
$this->input->post($1$2$1)
Note that I've reverted to using #ExplosionPills' suggested (.*?) here—it may be better, actually.
I got a string like this:
PREFIX-('STRING WITH SPACES TO REPLACE')
and i need this:
PREFIX-('STRING_WITH_SPACES_TO_REPLACE')
I'm using Notepad++ for the Regex Search and Replace, but i'm shure every other Editor capable of regex replacements can do it to.
I'm using:
PREFIX-\('(.*)(\s)(.*)'\)
for search and
PREFIX-('\1_\3')
for replace
but that replaces only one space from the string.
The regex search feature in Notepad++ is very, very weak. The only way I can see to do this in NPP is to manually select the part of the text you want to work on, then do a standard find/replace with the In selection box checked.
Alternatively, you can run the document through an external script, or you can get a better editor. EditPad Pro has the best regex support I've ever seen in an editor. It's not free, but it's worth paying for. In EPP all I had to do was this:
search: ((?:PREFIX-\('|\G)[^\s']+)\s+
replace: $1_
EDIT: \G matches the position where the previous match ended, or the beginning of the input if there was no previous match. In other words, the first time you apply the regex, \G acts like \A. You can prevent that by adding a negative lookahead, like so:
((?:PREFIX-\('|(?!\A)\G)[^\s']+)\s+
If you want to prevent a match at the very beginning of the text no matter what it starts with, you can move the lookahead outside the group:
(?!\A)((?:PREFIX-\('|\G)[^\s']+)\s+
And, just in case you were wondering, a lookbehind will work just as well as a lookahead:
((?:PREFIX-\('|(?<!\A)\G)[^\s']+)\s+
You have to keep matching from the beggining of the string untill you can match no more.
find /(PREFIX-\('[^\s']*)\s([^']*'\))/
replace $1_$2
like: while (/(PREFIX-\('[^\s']*)\s([^']*'\))/$1_$2/) {}
How about using Replace all for about 20 times? Or until you're sure no string contains more spaces
Due to nature of regex, it's not possible to do this in one step by normal regular expression.
But if I be in your place, I do such replaces in several steps:
find such patterns and mark them with special character
(Like replacing STRING WITH SPACES TO REPLACE with #STRING WITH SPACES TO REPLACE#
Replace #([^#\s]*)\s to #\1_ server times.
Remove markers!
I studied a little the regex tool in Notepad++ because I didn't know their possibilities.
I conclude that they aren't powerful enough to do what you want.
Your are obliged to learn and use a programming language having a real regex capability. There are a number of them. Personnaly, I use Python. It would take 1 mn to do what you want with it
You'd have to run the replace several times for each space but this regex will work
/(?<=PREFIX-\(')([^\s]+)\s+/g
Replace with
\1_ or $1_
See it working at http://refiddle.com/10z
I have some text like this:
dagGeneralCodes$_ctl1$_ctl0
Some text
dagGeneralCodes$_ctl2$_ctl0
Some text
dagGeneralCodes$_ctl3$_ctl0
Some text
dagGeneralCodes$_ctl4$_ctl0
Some text
I want to create a regular expression that extracts the last occurrence of dagGeneralCodes$_ctl[number]$_ctl0 from the text above.
the result should be: dagGeneralCodes$_ctl4$_ctl0
Thanks in advance
Wael
This should do it:
.*(dagGeneralCodes\$_ctl\d\$_ctl0)
The .* at the front is greedy so initially it will grab the entire input string. It will then backtrack until it finds the last occurrence of the text you want.
Alternatively you can just find all the matches and keep the last one, which is what I'd suggest.
Also, specific advice will probably need to be given depending on what language you're doing this in. In Java, for example, you will need to use DOTALL mode to . matches newlines because ordinarily it doesn't. Other languages call this multiline mode. Javascript has a slightly different workaround for this and so on.
You can use:
[\d\D]*(dagGeneralCodes\$_ctl\d+\$_ctl0)
I'm using [\d\D] instead of . to make it match new-line as well. The * is used in a greedy way so that it will consume all but the last occurrence of dagGeneralCodes$_ctl[number]$_ctl0.
I really like using this Regular Expression Cheatsheet; it's free, a single page, and printed, fits on my cube wall.