Related
Closed. This question is opinion-based. It is not currently accepting answers.
Want to improve this question? Update the question so it can be answered with facts and citations by editing this post.
Closed 7 years ago.
Improve this question
Let's say you have a company running a lot of C/C++, and you want to start planning migration to new technologies so you don't end up like COBOL companies 15 years ago.
For now, C/C++ runs more than fine and there is plenty dev on the market for it.
But you want to start thinking about it now, because given the huge running code base and the data sensitivity, you feel it can take 5-10 years to move to the next step without overloading the budget and the dev teams.
You have heard about D, starting to be quite mature, and Go, promising to be quite popular.
What would be your choice and why?
D and Go will probably just become as popular as Python and Ruby are today. They each fill a niche, and even though D was supposed to be a full-fledged replacement of C++, it probably will never acquire enough mass to push C++ away. Not to mention that they both aren't stable/mature enough, and it's unknown whether you'll have support for these languages in 10-20 years for the then-current hardware and operating systems. Considering that C/C++ is pretty much the compiled language and is used in the great majority of operating systems and native-code applications, it's very unlikely that it'll go away in the foreseeable future.
C and C++ are a pretty much unbeatable combo when it comes to native/unmanaged/"lowlevel" languages.
Not because they're the best languages, far from it, but because they're there, they do the job, and they're good enough. There's little doubt that D, for example, is better than C++ in most respects. But it fails in the most important one: Compatibility with all the existing C++ code. Without that requirement, most of that code would be written in a managed language today anyway. The only reason so many codebases use C++ today is because they used it last year, and it'd be too much of a pain to switch to something else. But if and when they switch, they typically don't switch to D. They switch to C# or Java or Python.
The problem for D and other "upcoming" languages competing for the same niches, is that while they're better, they're not groundbreaking enough to motivate people to actually switch to them.
So C and C++ are here to stay. C is unlikely to evolve much further. It is as it is, and one of the niches it has to fill is "simplicity, even for compiler writers". No other language is likely to beat it in that niche, even if they never revise the standard again.
C++ is evolving much more dramatically, with C++0x getting nearer, and they've already got a huge list of features they want to do afterwards. C++ isn't a dead end in any way.
Both languages are here to stay. Perhaps in 50 years other languages will have replaced them, but it won't happen this decade.
I currently use D regularly. I wouldn't recommend it yet for people writing production code because it's too bleeding edge. I get away with it because most of my code is research prototypes in bioinformatics. However, the language is starting to stabilize. Andrei Alexandrescu is releasing a book titled "The D Programming Language" next March, and right now there is a push to stabilize the spec for version 2 of the language in time for the book.
While D is not a formal superset of C, it is what I'd call an idiomatic superset except for the lack of a preprocessor. In other words, any code written in C proper (ignoring the preprocessor), can be trivially translated to D without a redesign, because C concepts like pointers and inline ASM are there and work the same in D as in C. D also supports direct linking to C code and the D standard library includes the entire C standard library.
Also, despite D's lack of libraries because it is still a bleeding edge language, it's a library writer's dream because of its metaprogramming capabilities. If it takes off, it will probably have some pretty impressive libs. For a preview of this, see std.range or std.algorithm in the D2 standard library (Phobos). As another example, I implemented an OpenMP-like parallelism model (parallel foreach, parallel map, parallel reduce, futures) as a pure library in D, without any special compiler support. (See http://cis.jhu.edu/~dsimcha/parallelFuture.html)
Given that you're mostly interested in the long term, I'd say give D 6 months to stabilize (given Andrei's book and the current push to stabilize the language, version 2 should be stable by then) and then take a hard look at it.
Edit: Now that the core language spec is relatively stable and the focus has turned to toolchain and library development, I would recommend D for small production projects unless you are in a very risk-averse environment. Larger projects that absolutely must have good toolchain and library support should still wait, though.
If you believe in the lean manufacturing principles, you should strive to "decide as late as possible". The moment should be the last responsible moment, meaning the moment at which failing to make a decision eliminates an important alternative.
I think this principle can be applied to your situation. Instead of committing now to a language (that you don't even know will be around in 10 years), you should keep your options open. Maybe refactor some of your code so it is a bit more generic or is built on more abstractions, so that when it is indeed required to migrate, the process will be easier.
Stick with C and C++. I don't see it going the way of COBOL, it runs as well as anything, and you'll have no problem finding people to code in C and C++.
C++ -- it is relatively young and updated... It has a big number of compiler vendors and got
improved all the time.
C -- it would live for a long time filling the gap between assembler and higher level languages. It is also very simple and easy to implement language, so it would remain the
first language for various "strange" architectures like embedded or extremely new ones.
D is promising but still very new and unstable specifications and libraries.
Go was born few weeks ago... Never use anything of version 0 for big important projects. Also it is significantly more limited the C++ or D.
2019 update: C++ will stay around for the next 10 years... (if not, I will correct this answer, when it will not be relevant any more....)
the reason companies works with COBOL today is b/c they already have millions of COBOL code written. if the could throw it - they will do it at once, on the other hand - companies work with C/C++ as part of their needs and new projects using this language b/c they can't / don't want to use java/c# any other framework based language - so COBOL is not the analogy here.
Like dsimcha said the D way is currently risky. Yet the language has a huge potential, it is low-level and i've experienced drastically better productivity with D (instead of C++). Perhaps what people feel with dynamic languages.
Go is so much blog-marketed it seems like a joke to me.
Dispatching an interface method is not trivial, and actually slower than dispatching a regular single-inheritance method.
If you'd have a huge codebase the decision is of course more difficult, I would advise only to switch for new projects, not for existing ones.
I wouldn't concentrate on a language but more on the libraries surrounding it. C++ in combination with the boost libraries are an excellent choice. People who develop in C++ tend to have a better understanding of computing, I myself started of with Java which made my life easier by hiding a lot of fundamental stuff, which is good, however I only really started to understand programming once I learned C/C++ (pointers etc).
I do recognise that C++ can be hard (e.g. memory management) so I think it's good to have a 'add on' language where performance is not essential and readability (==maintainability) scores high: I recommend Python for this.
There are countless machines running C++ software, I don't see them shutting down all at once. If C++ will go in the way of COBOL there will be a huge market for application migration. There will be specialized tools developed to translate C++ applications to the popular language of the time (Z++ ???).
So I guess the best advice is to cross that bridge when you come to it.
Check out Intel® Cilk++ Software Development Kit if you want to spark your interest in C++/Multi-Core development. I don't see C or C++ going away anytime soon either.
Comparing C* to Cobol is questionable
Comparing C* to Cobol may lead to the wrong conclusion. C was perfect for its day, a huge leap forward on its introduction, and it still gets the job done today.
I would sum up Cobol on my most charitable day with "nice try".
C and C++ will survive for a long time because they fit the bill well as implementation languages. This won't ever really change.
Also, consider that the main negative issue with C/C++ is the lack of memory safety. This tends to be less and less of a problem as codes mature. This means there will not be a serious reason to replace the old codes.
I expect that software systems will grow outwards from C. Look at the hierarchy today:
application written in a framework such as Rails
application back-end written in Ruby, PHP, Python, C#, whatever
Ruby, PHP, Python, or C# run-time implementation (written in C*)
OS kernel (written in C89)
I don't think the old layers will vanish, and I think legacy higher layers written in C and C++ will simply be supported that way for an indefinite period of time, eventually being phased out for their replacements written in Ruby, Python, C#, or a future development.
We have no idea if Go will find acceptance. Just being by Google is probably not going to be enough.
D? Well, some nice things are being said about it but it won't be taking off either. No user base to speak of. D is #20 in popularity on the TIOBE Index, and dropping fast.
You may say that a language's popularity has little to do with how well it's suited for your company's work. But it has a lot to do with how easy it will be to find people qualified to program in it.
Java is on top and I would be surprised if it went far away in the next 20 years. It's not considered a systems programming language but performs well enough that there are few tasks you'd do in C++ that you couldn't in Java. Certainly these days nobody is willing to task human programmers with the job done (flawlessly and often more effectively) by the garbage collector. I for one considered Java a significant step up from C++ in terms of programming effectivity.
I'm quite impressed by Ruby. It's an elegant, expressive language: You can accomplish a lot with not too much code, yet that code is still mostly legible. One of Ruby's main principles is to be consistent and not hold surprises for the developer. This is an extremely good idea, IMO, and boosts productivity. At the time of the big Rails hype (which may still be ongoing), I made a wide berth around Ruby because its reference implementation is abysmally slow. However, the JRuby folks at Sun have made it blazingly fast on a JVM, so now it's definitely worth some consideration. Ruby provides closures and a good handful of functional programming capabilities (see below for why this important), though it's not really considered a FP language. TIOBE index: 10 and rising.
Something to consider for the future is the fact that CPU makers have run up against a performance limit imposed by physics. No longer is there a 30% faster CPU available every Christmas, as it was in the past. So now to get more performance you need more cores. Software development will need all the help it can get in supporting multi-core concurrent programming. C++ leaves you mostly alone with this, and Java's solutions are horrible by modern standards.
In view of this, there's a certain trend toward functional programming (which eliminates much of the hassle associated with concurrency) as well as languages with better concurrency support. Erlang was written specifically for this and for the ability to swap code in a running program (Ericsson wanted incredible uptimes). Scala is similar to Java but with much stronger support for functional programming and concurrency. Clojure, ditto, but it's a Lisp and it's not even in the top 50 (yet!!).
Scala was developed academics, and shows it: It's sophisticated and downright pedantic about data types; it tries to be the Swiss Army Knife of programming languages. I believe a lot of medium-smart programmers will have trouble getting a grip on Scala. Ruby is less FP and doesn't do so much about concurrency, but it's pragmatic, and fun and easy to get stuff done in. Also, running on the JVM, there is an enormous amount of code readily available in Java libraries, which Ruby can interface with. So:
My bet would be on Ruby, with an outside chance on Scala. But there are plenty of alternatives!
Java. For most low level things Java is fine these days. Why go with a partial solution to C/C++ such as D or Go when you can have something as safe and easy to develop with as Java? If you are looking for a real time solution, D and Go are definitely not it, not to mention they are probably even less supported than Java.
Java is now a system programming language. I don't see how you can consider anything with unsafe constructs such as pointers "next gen". The only reason those insecure constructs ever existed is because it was the pragmatic approach to building a turing complete language. There was no concern of representing the memory in discrete objects, because they just wanted to build something that worked. There are already hard and soft realtime applications in Java, a variety of hardware bytecode processors, and over 2 billion mobile devices running Java. At most all you would have to do is add some constructs for interoperability with devices, which wouldn't be that much code; even in C/C++ you'd still have to add these constructs...
What are you programming? 8-bit microcontrollers with 1KB ram? In that case, it would be pointless to use anything other than the assembler for that platform...
As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.
Closed 9 years ago.
I'm thinking of trying to make some simple 2d games, but I've yet to choose a language. A lot of people recommend either C++ with SDL or python with pygame. I keep hearing that developement on C++ is fairly slow, and developement time with Python is fairly fast.
Anyways, could anyone elaborate on this? What exactly makes development in C++ so time consuming? The programs I've made have been Project Euler-style in that they're very short and math-based, so I have no experience in larger projects.
There are two things that are relevant between C++ and Python that will affect your time-to-develop any project including a game. There are the languages themselves and the libraries. I've played with the SDL to some extent and peeked at PyGame and for your specific instance I don't think the libraries are going to be much of a factor. So I'll focus on the languages themselves.
Python is a dynamically-typed, garbage-collected language. C++ is a statically-typed, non-garbage-collected language. What this means is that in C++ a lot of your development time will be spent managing memory and dealing with your type structure. This affords you a lot of power, but the question is do you really need it?
If you're looking to write a simple game with some basic graphics and some good gameplay, then I don't think you truly need all the power that C++ will give you. If you're looking to write something that will push the envelope, be the next A-list game, be the next MMO, fit on a console or a handheld device, then you will likely need the power that C++ affords.
The power of Python is in it's ability to allow you to focus more on the problem than having to deal with testing low-level issues such as memory allocation. I can't count how many times days of development have been wasted tracking down memory leaks in C or C++. An advantage of all high level languages.
Python is very easy to learn compared to C++,so you can be up to speed a lot quicker in doing basic programming tasks. Therefore, you'll move quicker into advanced tasks as well.
C++ has a lot of power but has many ways to shoot yourself in the foot compared to Python(not saying that can't be done in Python).
The compile/debug cycle can get old sometimes in C++ depending on what you're trying to do. Although technically speaking, everytime you run a Python script it's getting "compiled" per se, it's just a quicker cycle. A good IDE can help alleviate this is in Python by automatically checking your code for syntax errors while you type it out.
If you have some code you want to test inside a larger project, it's a hassle sometimes to isolate it for testing. Whereas a good Python interpreter such as IPython, makes it easy to test a small bit of code and see how the language behaves and paste it into a file.
Python also interfaces very well with existing C/C++ code through many numerous ways. That way if a new whizbang Python module you created is really slow, then you can soup it up in C/C++ then wrap it up with Python through ctypes, Boost::Python, or SWIG.
And most of all, Python comes with a great standard library that has a lot of stuff figured out for you. It's just a matter of putting the pieces altogether! It has a great community behind it, so if it's not in the standard library, there's a good chance someone out there has solved the problem (PyGame, Numpy, SciPy, Pyserial, PyWin, etc.) for you. You can just google it, grab it and plop the code right into your program...away you go!
I've heard these complaints before about C++, but the fact is, programming in any language with which you are unfamiliar is time consuming.
A good C++ programmer can probably crank out the app much faster than an okay Python programmer and visa versa.
I think C++ often gets a bad reputation because it allows you get much lower level - pointers, memory management, etc, and if you aren't used to thinking about such things, it can take a bit of time. If you are used to working in that environment, it can become second nature.
Unless choice of language is something imposed upon you by your company, team, client, etc. I usually recommend that folks go with the language they are most comfortable with OR most interested in learning more about. If speed is the issue you are concerned with, look at the learning curve for each language and your past experience. C++ tends to have a higher learning curve, but that too depends on the person.
Kindof a non-answer I know.
Python has some big advantages over programming languages like C++. I myself have programmed a lot with C++, C and other programming languages. Lately I am also programming in Python and I got to like it very much!
You can have a quick start with Python. Since it is rather simple to learn (at least with some programming experience and enough abstract thinking), you can have fast successes. Also the script-like behaviour makes starting easy and it is also possible, to quickly test some things in the integrated shell. This can also be good for debugging.
The whole language is packed with powerful features and it has a good and rather complete set of libraries.
There was the argument that with the "right library" you can develop as quickly with C++ as with Python. This might (partly) be, but I myself have never experienced it, because such libraries are rare. I had also a big library at hand, but still lacked many valuable features in C++. The so called "standard template library" STL makes things even worse in my opinion. It is a really powerful library. But it is also that complex, that it adds the complexity of an additional programming language to C++. I really disliked it and in a company I worked in, much worktime was lost, because the compiler was not able to give useful error-output in case of errors in the STL.
Python is different. Instead of putting the "speed of the programm" on the throne -- sacrificing all else (as C++ and especially the STL does) -- it puts "speed of development" first. The language gives you a powerful toolkit and it is accompanied by a huge library. When you need speed, you can also implement time critical things in C or C++ and call it from Python.
There is also at least one big online Game implemented in Python.
It's time consuming because in C++ you have to deal with more low-level tasks.
In Python you are free to focus on the development of the actual game instead of dealing with memory management etc.
there are many things that make c++ longer to develop in. Its lower level, has pointers, different libraries for different systems, the type system, and there are others I am sure I am missing.
It takes about the same amount of time to write the same code in pretty much all of the high level languages. The win is that in certain languages it is easier to use other peoples code. In a lot of Python/Ruby/Perl apps, you write 10% of the code and import libraries to do the other 90%. That is harder in C/C++ since the libraries have different interfaces and other incompatibilities.
C++ vs Python is a pretty personal choice. Personally I feel I lose more time with not having the C/Java class system (more run time errors/debugging time, don't have anywhere near as good auto completion, need to do more documentation and optimization) than I gain (not having to write interfaces/stub function and being able to worry less about memory managment). Other people feel the exact opposite.
In the end it probably depends on the type of game. If your processor intensive go to C++ (maybe with a scripting language if it makes sense). Otherwise use whatever language you prefer
I'd focus more on choosing a framework to build your game on than trying to pick a language. Unless the goal is to learn how games work inside and out, you're going to want to use a framework. Try out a couple, and pick the one that meets your requirements and feels nice to you.
Once you've picked the framework, the language choice becomes easy - use the language for which the framework is written.
There are many options for game frameworks in C++ - pygame works for python. There are many that work with other languages/tools as well (including .NET, Lua, etc.)
Short Answer
Yes python is faster in terms of development time. There are many case studies in real life that show this. However, you don't want to do a 3d graphics engine in Python.
Do you have any programming experience at all? If not, I would start with Python which is easier to learn, even if it is not a better tool for game development. If you decide you want to program games for living, you'll probably need to switch to C++ at some point.
Note that SDL is currently slow, because it basically doesn't use hardware acceleration.
SFML is an alternative of choice, and is available in Python too.
Why limit yourself to those two options? With C# or Java you get access to a huge collection of useful libraries plus garbage collection and (in the case of C#) JIT compiling.
Furthermore, you're saying that you're looking to do game development, but from your task description it sounds like you're also looking at coding your own engine. Is that part of the exercise? Otherwise you should definitely take a look at the available Indie engines out there - lots are cheap of not free and open source.
Needless to say, working from an existing engine is definitely faster than going from scratch :)
Some people would argue that development time is slower in C++ when compared to Python.
Wouldn't it be the case that the time you saved in developing an application (or game) in python is the time you gonna use in improving performance after its developed? and in the later part when you have least options left?
It largely depends upon the purpose for which you are going to develop the application.
If you are thinking for an enterprise application in which case it is going to be hit by millions (web-app) or an application with focus on low-footprint, faster loading into memory, faster execution, then your choice is C++.
If you are projecting your application for not being use at this level, surely Python is the choice to go for.
Maintainability is considerable, but disciplined code can overcome this.
Largely depends upon long term projections. On how serious and critical the application is going to be.
As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.
Closed 10 years ago.
I have tried to keep up with C++ since they introduced 1998 ANSI/ISO C++. I absorbed the new concepts and tried to understand them. I learned about exception handling, templates, and namespaces. I've read about the new cast mechanisms and worked with the STL library.
All of these concepts required a lot of energy. But now I am somewhat worried about the future of C++ when having a look at the new C++0x standard.
Things are getting more and more complicated. This language is becoming a monster.
I'm not sure that I want to keep up with the language anymore, since I don't do my day-to-day hacking in C++ anyway. I mostly use interpreted or bytecode languages.
So why should I bother to learn this difficult, yet exceptionally powerful, language? I can do 95% of my business with Python et al. With the remaining 5%, I can deal with plain old C++ or C without hassle.
What do you think?
Everyone uses a subset of C++. For almost all application programming in C++, whether server or client side, that subset is manageable. In my opinion, the only folks that need to stay on top of absolutely every nuance of the language are the library writers -- people implementing Boost, STL, Loki, etc.
But I would absolutely use the language that fits the task. If Python is more readable and more maintainable than C++ for your job, and you don't need what C++ offers, then certainly stick with Python.
Hear what Bruce Eckel { author of the two of the so-called best C++ books } commented on C++ a few weeks ago:
That said, I hardly ever use C++
anymore. When I do, it's either
examining legacy code, or to write
performance-critical sections,
typically as small as possible to be
called from other code (my preferred
approach is to quickly write an app in
Python, then profile it and if
necessary improve performance by
calling small portions of C++ using
Python's ctypes library).
Because I was on the C++ Standards
Committee, I saw these decisions being
made. They were all extremely
carefully considered, far more so than
many of the decisions made in Java.
However, as people have rightly
pointed out, the resulting language
was complicated and painful to use and
full of weird rules that I forget as
soon as I'm away from it for a little
while -- and I figured out those rules
from first principles while I wrote
books, not just by memorizing them.
Additionally, you should read this thread and Danny Kalev's predictions on C++.
However, the growing complexity of C++ will create pressure towards splitting the language into quasi-official dialects. We can already see this trend today; it will probably intensify in the future.
EDIT:
You should take a look at this discussion, too:
C++ - Anyone else feel like C++ is getting too complicated?
First, many features of C++0x are to make the language easier to use. More readable template compile errors, more consistent initialization syntax, support for threading, which would otherwise have to rely on platform-specific libraries and so on.
So if you do use C++, I feel learning the important parts of C++0x should be a manageable task. Remember that you don't need to learn all the new features to use the language. Some features are primarily added as an aid for library implementers, for example allowing the STL to be implemented more efficiently, but which shouldn't really affect the end-users usage of the language. And some are only really necessary in very rare cases. Ignore those parts of the language.
One of their stated goals with C++0x is to avoid it becoming harder to use.
But apart from that, do you need C++? If you do your coding in other languages, why bother keeping up with C++?
You're not forced to use every feature a language provides. I don't use setjmp/longjmp in C despite it being there. I also don't use every aspect of the Java collections.
If you think the new features will make your code delivery better (faster or higher quality or both), then use them. Otherwise ignore them.
It's useful to know at a high level what they all are, if only to get you through job interviews, but half the stuff they add to languages are unnecessary in my opinion.
I never even got around to using C++ templates before switching to Java, but I knew what they were for.
It's not always about learning the latest and greatest. Software (at least at your job) is about delivery of product. That can be done in COBOL or FORTRAN if you're proficient enough at it.
No one, except maybe Bjarne and Herb Sutter, know all of C++. As you've said it's an incredibly huge language. Expecting to be able to take the entire standard + the specific implementation details of your specific compiler or compilers is truthfully unrealistic.
But you don't need to know everything in order to use C++. Instead only learn the subset of C++ that is valuable to you and your projects. It doesn't hurt to keep expanding your knowledge but unless you're writing a C++ compiler, there's no reason to know the whole thing. Even if you accomplish it, all of the people you work with won't.
So why should I bother to learn this
difficult, yet exceptionally powerful,
language? I can do 95% of my business
with python et al. With the remaining
5%, I can deal with plain old C++ or C
without hassle.
Well, for the most part you answer your own question. There is no need for you to keep up with the bleeding edge of C++ at this time.
However, the language will keep marching on. In a few years, some of the concepts you consider a bleeding-edge waste of time today will be in common use. Someday you may find during your 5% of using "plain-old C++" that some example code or code you're collaborating on uses a construct you're not familiar with. At that point, you'll need to hit the net and brush up on the new "current" C++.
Is that going to be a problem? Of course not. You're a programmer. You keep abreast of the latest programming concepts in the context of your 95% language, which also changes over time. You will likely already be quite familiar with the concepts and need only familiarize yourself with its C++ syntax when the time comes that you must use them.
Personally I hope to continue keeping up with C++, even if my career moves more toward Java or another next-gen language. Why? I would like to say because it interests me the most and because I love the complexity and expressiveness of it all. More likely, though, is just because it was my first professional language; I consider it my "native tongue".
If it does not interest you, and does not concern your job or future job, don't bother. What's wrong with that? Nothing.
Good answers.
Computer makers compete for buyers, software competes for your disk space, and languages compete for users. They do this by trying to snag each other's features.
I'm wondering how long before we see Fortran come out with lambda expressions :-)
I am hard-pressed to find a single instance where C++0x has been made more complex than C++98. There are two things which really are complex:
Concepts.
the Memory Model
but the first one has been removed again (thankfully; standardizing unimplemented features has never worked out in C++, witness throw specifications, extern templates, auto_ptr, ...), and the second isn't really something that a modern programming language can escape. It's been externally induced by Intel & Co helpfully breaking your programs to make them run faster.
The rest is just fixing annoyances that every C++ programmer has been frequently hitting in the last decades.
As a side note: I find it ... amusing ... to see how languages such as C# get packed with a database query language (LINQ) and C++ is objurgated as being bloated.
You don't need to know every standard that comes out by heart. It does help to know about the big picture though. The 5% that you do code in may have you reinvent the occasional wheel. Depending on how much time, importance that 5% has (think Pareto) you need to take a call.
Also, any particular reason (like legacy code dependency) why you can't move that 5% to python?
First try attending a course on c++0x and make your firm pay for that :)
Our brains can fit amazing amounts of junk-knowledge. Instead of cursing and having programmer-wtf-moments we should first learn from program users and listen to other people's opinions/knowhows. Knowledge transfers much faster that way.
My suggestion would be to learn the new keywords of c++0x ( && FTW) but not bother trying to learn the entire lib. Use python for w/e you want, possibly C# for apps, then use C++(0x) when you need to do something powerful. and ask stackoverflow & google about the new container when prototyping.
You dont need to use a select few language,
As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.
Closed 9 years ago.
I ran into this supposed interview of Bjarne Stroustrup, the inventor of C++.
http://artlung.com/smorgasborg/Invention_of_Cplusplus.shtml
Stroustrup: Well, it's been long enough, now, and I believe most people have figured out for themselves that C++ is a waste of time but, I must say, it's taken them a lot longer than I thought it would...
Interviewer: Yes, but C++ is basically a sound language.
Stroustrup: You really believe that, don't you? Have you ever sat down and worked on a C++ project? Here's what happens: First, I've put in enough pitfalls to make sure that only the most trivial projects will work first time. Take operator overloading. At the end of the project, almost every module has it, usually, because guys feel they really should do it, as it was in their training course. The same operator then means something totally different in every module. Try pulling that lot together, when you have a hundred or so modules. And as for data hiding, God, I sometimes can't help laughing when I hear about the problems companies have making their modules talk to each other.
Is this a hoax? Do any of these points seem true for any of the veteran C++ programmers out there?
You just have to check the Stroustrup's website (the FAQ part) to find that it's wrong - a well known hoax as Judah Himango already pointed :
Did you really give an interview to IEEE?
in which you confessed that C++ was
deliberately created as an awful
language for writing unmaintainable
code to increase programmers'
salaries? Of course not. Read the
real IEEE interview.
It's a well-known hoax.
And no, learning C++ isn't a waste of your time, something that's been discussed on StackOverflow many times.
As mentioned, this is a well-known hoax.
But it does provoke some interesting points. These days C++ is a waste of time, except for when you can't afford to waste time. Less opaquely: C++ is a waste of development time, except for when you can't afford to waste execution time.
From the article titled "The Real Stroustrup Interview" in IEEE Computer Magazine Vol. 31 Issue 6 pp.110-114 (June 1998):
For the past few months, a hoax interview between Stroustrup and Computer has been making the rounds in cyberspace. While we regret the incident, it offers us a welcome opportunity to have the father of C++ share his insights on Standard C++ and software development in general. We can also attest to his continued sense of proportion and humor—he suggests that the fictitious interview would have been a much funnier parody had he written it himself.
As others mentioned, this Interview is hoax.
Well, I am one of the persons who hate C++ and normally doesnt use it, but learning it was definitely not a waste of time. At least now I know why I hate C++ and I understand why other persons use this language and think it is good.
If you want to learn this language to know about its concepts, its benefits and its drawbacks, to be able to read code written in it, and in general to be able to "talk about" it, it is never a waste of time. Same for any other programming language. It will increase your expierience. For example, C++ shows one common way of OOP - a way I dont like, but a way many other people use.
But if you want to learn it because "the people say that it is the best" (as I sometimes read), then it is really a waste of time. Same for any other programming language.
Programmers that feel attracted to higher level languages that take care of memory management and other tasks for them, could feel that C++ is a waste of time.
It certainly is if you can achieve the same goal with another language in less time and with less bug fixing and don't mind the downsides as efficiency.
But I don't regret having learned and spent so many hours coding in C/C++ for it's such a beautiful language and allows you to produce things that not many other languages can.
I mean, don't you want to use the language with which operating systems and compilers are written? that's not a waste of time at all from my perspective.
C++ is far from being a waste of your time. You'll understand valuable concepts that will help you understand many other concepts in different programming languages. I.E.: VTABLE.
There is not a single framework which uses all language features of C++. This introduces a huge inconsistency to the language's ecosystem.
QT is one of the few APIs which I would call a framework (or API for a lot of things):
But it defines own string, own array, ...
What's the point of a "standard" library when no one can use it in a portable and compatible way (from the aspect of interaction with other APIs)?
I know, there is boost, but what is boost compared to an API such as QT? Nothing.
Look at Java: The is the standard Java API, and every "foreign" API uses it, it's all perfectly compatible.
C++ (and Java) probably the best language to learn to understand concepts of OOP.
I remember learning it in college benefited me a lot.
Stroustrup is not that stupid to say that! It is definitely a hoax!
As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.
Closed 9 years ago.
I know that C++ is a very complex language that takes many years of practice to master.
Taking that into account do you know of a small project (around a 1k of loc) that tests all of C++ major features (inheritance, pointers, memory management, etc).
The thing is I'm a Java/Python programmer and I really want to learn C++ so I've been studying C++ for a while but haven't tested anything of what I've learned beyond small exercises.
I want to take all of that knowledge and put into practice.
Doing this alone you will obtain many harmful habits. It's much better to get an internship with a company that has high competence in C++ development and train under guidance.
C++ is like a grenade without a safety pin – looks cool and you've heard that all "real professionals" use it, but you don't know when it is to explode. A tremendous amount of features that can be used for good or for evil without knowing whether it's really good or evil. That's why guidance is a must here.
A memory manager. That should get you thinking about:
free store management
pointers (of course!)
inheritance (you will want your driver code to use this)
templates (another way to pass the manager around -- driver #2)
designing user defined data structures (a memory block)
efficient use of standard container(s)
algorithms (to move around, figure out empty blocks, defragment)
Effective C++ and More Effective C++
Other than that, pick a (small?) personal project you want to write and do it in C++. You are not going to learn C++ by reading a 1000 line project.
I'm not sure about anything that tests all major features. There are a lot of them, and some are rarely used together (templates and virtual functions come to mind. Both achieve a form of polymorphism, so you often use one or the other depending on your needs.)
A suitable project in that it'd touch on all the important features might be something apparently simple like writing a correct container class, similar to std::vector or std::list. Ensure exception safety, iterator validity, the appropriate time complexity on all operations and every other requirement specified in the standard.
The problem with this, as well as most other projects, is that you won't really know when you're done. Making a resizable array might take 50 lines of code, and 20 minutes of your time. And then a beginner would think he's done. Making it exception-safe requires you to be able to spot all the places where the class might be thrown into an inconsistent state by an exception.
That's a kind of general problem with C++. It's easy enough to think you get it, and the compiler certainly won't notify you of aspects you've forgotten to handle. So you might think your code is perfect, and yet it'll crash for all sorts of odd special cases.
As sharptooth said, for a language as messy as C++, writing code on your own is risky. It is easy to fall into the trap of "I've written some code, it compiles and it seems to run. Therefore it is correct".
Of course you could post your code here or on other sites for review, or maybe just supplement your coding with reading the docs for actual high quality C++ code (most boost libraries tend to have comprehensive documentation, specifying both the rationale for various design decisions, and how it safely handles all the weird special cases that tend to crop up in C++. The C++ standard itself would be another excellent resource, of course. In either case, these might help you determine what problems to look out for)
When I was learning C++, I used it to write my own language for writing Colossal Cave style adventures. Like most computer languages it never saw the light of day, but it did teach me a lot about C++.
Whatever you choose the thing to avoid when learning C++ is GUI programming, which is a trap which will drain all your gumption and probably teach you bad C++ habits in the process.
I'd recommend creating a text based game. That really helped me firm up my C++. Doesn't take too long and you can exercise all the features you want. Come up with the game yourself. It is more fun that way.
Another great idea is to write a simple mathematics library, supporting Vectors Matrices etc.
But with todays libraries, that is only of academic use.
In order to learn C++ it is useful to look at a lot of well written C++ code.
I think the Qt library is quite nice for this so I suggest: Write an Qt application.
Look how they use C++ and create your own graphical components in a similar fashion.
Ideas:
- Stock chart viewer widget that connects to one of the financial websites and scrapes history data.
- Simple Excel like spreadsheet widget.
Depends on what area you want to work in. But nothing worth doing correctly comes in at less than 1000 lines of code.
If you are going to be writing games then try writing a Tetris clone.
If you think you will be using sockets etc then writing a simple chat/irc client would help.
Do you have a specific itch that needs to be scratched? When was the last time you thought "this sucks, I could do better?". Can you do better?
I would recomend writing a Tetris clone.
You can learn a lot of c++ concepts with this and learn a 2d library like SDL or maybe even OpenGL throgh SDL.
It is always good to have a project with visual results and at the end of it you can play it.
There seem to be two themes coming from the answers:
You need to pick a project that might involve more than 1K LOC in order to get the true experience of the project.
You need to also pair up with an experienced C++ developer, who can help you think through problems and avoid pitfalls associated with the language.
You can get around both of these by swing by sourceforge.net and signing up to help with an existing C++ project. As long as you don't mind your code being open source, you should be able to find an existing project to learn from plus experienced developers who can help by reviewing your code and offering guidance.
An interactive world:
A matrix where each position can be a Void or a Being.
A Being is something with a few attributes: age, Time left, gender, neigbor connections, etc. Capable a few interactions: fights, having sex and kids, friendships, etc. Some have special Skills, depending on their fathers (inherited trades)... like ability to kill, ability to make food,, etc...
Possible outcomes of those interactions and skills are changes on the self attributes, or creating offspring (when possible), or change neigbor attributes.
At each iteration, print the matrix as symbols/numbers on the console (depending on the attributes, etc), starting from a Biblical iteration 0 (initial conditions of your choice... you're God here).
Now you got some real-life pattern simulator, and learned something about inheritance, polimorfism, virtual functions, instantiation of classes, etc.
I would suggest a simple text editor would be a reasonable goal.
It's a problem domain that you have a good grasp of.
You have memory management issues, library class reuse issues (stl/curses?), pointer issues, and lots of options where derived classes can be used.
For polymorphism, perhaps, you can have the editor read from a keyboard, or suck commands in from a text file.
There is another good one.... dealing with files.
You don't have to cross platform it. You don't have to open source it. You don't have to show it to anyone. You don't even have to finish it. It can be an exercise just for you.
If you're learning fron a book, it must have plenty of well-thought-out exercises you can implement and learn from. Also check out the university sites and their C++ labs / assignments.