Visual C++ 2008 Forms Incredibly Slow - c++

In Visual C++ 2008 Express Edition when adding forms all of the default handlers for buttons, check boxes, etc go into FormName.h by default. So when I do this most of my handler code now goes in the header, then I switch back to the "Design View" to see the form designer. Once I have any reasonable size interface going back to "Design View" from the code view (of the header FormName.h) takes on the order of 1-3 minutes for (what I assume to be) the form designer to re-parse the header file to roundtrip any changes I may have made in the actual code.
Is there a way to change this behavior? I've done some basic Googling but haven't really found anyone complaining about this issue, so I assume I'm missing something obvious. Any help would be much appreciated.

It's a known problem with using Windows Forms designer with C++ in Visual Studio. You have to move your definitions of member functions manually from a header file to corresponding source file. You might want to take a look at this thread where I raised this issue on msdn c++ group.
Welcome to Visual C++.
ps.
Developers, developers, developers, developers; Yada, yada...

Related

VSIX Project - Properties tool window extension

There might be something wrong with the way I search for things but here is my problem. I'm looking for a way to implement a custom editing tool within the properties tool window in the Visual Studio editor. I've been looking through several documentation references, and they all lead to the use of different assemblies, but I can't get anything to work the way that I want.
First of all, I tried using the UITypeEditor class, with the step-by-step tuto I found here : https://learn.microsoft.com/fr-fr/dotnet/api/system.drawing.design.uitypeeditor?view=net-5.0
The problem I faced was that it only seemed to be working with Winforms projects, and I'm trying to use this with a WPF project.
Afterwards, I tried following this tutorial, in order to create a project template : https://learn.microsoft.com/en-us/visualstudio/extensibility/creating-a-basic-project-system-part-1?view=vs-2019
This has led me to think that the methods used in the tutorial might have been either deprecated or improved with the used of AsyncPackages instead of ProjectPackages, and the appearance of the Microsoft.VisualStudio.Shell.Flavor assembly that seem to render useless the ProjectNode class (it doesn't even show up anymore, the method has been replaced with a void).
The last bit I tried exploring was the use of the ProjectSystem, as documented here : https://github.com/microsoft/VSProjectSystem
It was actually worse because I couldn't get it to work like I wanted, the project type I was creating could not register C# files and I wasn't able to add new classes (I might need to dig a bit deeper here but I don't know where to look).
So basically, I'm looking for help to extend the properties tool window, through an editor within the window, or a modal window opened by clicking on an ellipsis button in the properties window.
Thank you for reading this, if you have any info, I'm very interested.
I've actually found a thread leading to what I was trying to do here. This tutorial leads to a way to implement a customized editor, either inline, extended or in another dialog window. This was the thing I needed, and with a few tweaks I managed doing what I wanted.

Windows MFC macros

I'm trying to learn the MFC to code for Windows and I've come across things like the ID_FILE_EDIT macros that are defined as being unicode values I think. I understand, I think, that the macros specify the item in the menu pulldowns. Question is, how do I define my own and where do I put them. I'm trying to get custom menus and custom menu buttons to stem from the MFC. Like I want under file 'new, open existing doc and stuff like that'. I've got VS2013 pro and all the headers I could ever want. Second question is where do I start with the MFC. Should I start by practicing making windows then pulldowns and then... something else? I know where the documentation is at and I understand where the class references are. Really just confused on using it to make my own stuff.
ID_FILE_EDIT (and other defines, like ID_FILE_NEW, ID_FILE_OPEN, etc.) are macros to specify a name for an unique resource identifier that is used to identify a menu command and/or toolbar item. They are typically defined in a header file named resource.h.
Microsoft has released a numbering and naming convention as a Technical Note (TN), because the names and values ​​represented by these macros must follow a certain pattern: http://msdn.microsoft.com/en-us/library/t2zechd4.aspx
Under normal circumstances you can use Visual-Studio's built-in resource editor to create dialogues, menus, buttons, and all the other UI stuff. These editors also assign automatically unique ID's for any resource and generate the macros.
Your second question can not be answered easily. MFC applications are a wide field, ranging from simple, dialogue-based programs to sophisticated Model-View-Controller-based applications. If you just want to play around with MFC to familiarize yourself with the basic concepts of this framework, I recommend to start with a dialogue-based app.
Regards,
Stephan
In VC++ 6.0, Insert menu - Resource - Menu. Is how you add/edit a menu.
Where is the formatting bar gone on answers.
To learn MFC basics, manually build up the Scribble example application (http://msdn.microsoft.com/en-us/library/92y4h944%28v=vs.90%29.aspx) with which whole generations of MFC programmers made their first contacts with MFC. Don't just read it, start with an empty application and gradually add the stuff as in the tutorials. It'll show you a lot. If you don't know the win32 api yet though, you may want to start with reading the Petzold from front to back. Good luck, remember that these are libaries and API's from a time when it wasn't considered unreasonable to spend 3 months full time to learn something.

Is Embarcadero C++ Builder a good choice as an IDE? [closed]

Closed. This question is opinion-based. It is not currently accepting answers.
Want to improve this question? Update the question so it can be answered with facts and citations by editing this post.
Closed 8 years ago.
Improve this question
As we are (me and people I work with) more and more frustrated while working with C++ projects 250 000+ LOC in VS2010 sp1 (the slowness of this IDE is just unbelievable), in my company we were talking about migrating our code to some different IDE. We did some research, and a strong candidate seems to be Embarcadero C++ builder 2011 XE. Any thoughts on it? Is it any good? How does it compares to VS2010 ultimate?
I've been using C++ Builder since 1.0 and I hate it with a passion. You would think after all these years, simple little annoyances would be fixed by now but they are not. Here is a list of issues I have with C++ Builder IDE.
Your layout or personality never is maintained. You create one, save it and it only applies to certain things. For example the debugger window will not maintain its position nor will the message window. If you detach the project explorer it will sometimes dissappear. Most of the time reloading your personality doesn't fix this either. You are stuck dragging your windows back into place.
The debugger will sometimes work and sometimes not work. In a debug build if you set a break point and begin stepping through code, you can hover over a variable to inspect it. Sometimes this works and sometimes it doesn't work on the exact same variable. Crazy!
Eclipse looks for code mistakes like if you forget to put a semi-colon at the end of your statement, it puts a little ? mark in the margin. C++ Builder doesn't do anything like this. It gives you a cryptic compile time error message.
Recent versions of C++ Builder use a makefile similar to VS; it's an XML mess. Eclipse works with CMake and Makefiles. I've read in places that the CMake maintainers are looking for a C++Builder generator but last I checked this doesn't exist. I do embedded and cross compiling so sometimes my C++ Builder code is copied to my embedded development environment or shared with it and I wind up maintaining two build environments.
Not really an IDE but C++Builder does not take advantage of multiple CPUs to compile code. There is, however, a 3rd party tool you can spend more money on to get this. It's called TwineCompile (http://www.jomitech.com/twine.php). With Eclipse, they call out to whatever compiler you're using (gcc, etc...) and those compilers and make support -j option.
C++Builder comes with a limited version of AQTime which is a dynamic code profiler. Spend more and you get the more advanced version. Eclipse supports many dynamic and static code analysis (which also cost $$) but at least the plugins are there. We use Klockworx.
C++ Builder has no support, that I'm aware of, for external source control like GIT. Eclipse does. C++ Builder comes with subversion, I think, built-in. If it supports GIT, I could never get it to work. It tells me it doesn't understand the URL scheme when I give it a git path.
Certain template code I write causes the compiler to segfault and have to completely restart the IDE. This is nuts to me. You have a compiler that is 10+ years old and it's still segfaulting. I have a piece of C++ template code that when I take it to my work computer running exact same version of C++ Builder, it compiles OK, but on my home machine it segfaults. I'm absolutely sure there are no adverse factors at play like viruses, etc...
While compiling a large project that may take a long time, you are unable to browse code with the IDE. Sometimes you may see a compiler warning scroll by and you have to either wait for the compile job to complete to inspect the mentioned line or use an alternate means to open the file.
C++ Builder IDE has a concept of a Project Group with sub projects that are more/less self contained. The Project Group has no concept of a project group include/link path like the sub-projects have. Sub-projects have a base, debug, release paths where debug and release can inherit or block from the base but you don't have this at the project group level. The IDE has global settings which can be inherited but it's for everything you do in the IDE. So there is no way to modify for a given project group, just the include/linker paths for a set of sub-projects. I just think they could have done a better job with this.
C++ Builder's Build output is not color coded to, for example, show errors in red and warnings in some other color. Everything is black and white. VC and Eclipse color code and give option to change colors for various warnings and errors. The output tab in C++ Builder is same way. On big projects, it's very difficult to investigate compiler warnings with the other noise. In C++ Builder's IDE you can select level of warnings but this only affects output in the Output tab and you still get other stupid noise like letting me know its deleting linker state files "CleanLinkerStateFiles."
Unless you're doing Windows desktop GUI development, stay away from Embarcadero/C++ Builder. I started using C++ Builder version 1 back in the Borland days and have a few large projects that are heavily invested in the VCL so I'm stuck with it for those projects but all my new projects, I've been using Eclipse.
On a positive note about C++ Builder, the VCL is quite nice. It's not multi-threaded but it's nice for creating a desktop GUI app really quick. I think it's much faster to get a C++ based GUI app up in CBuilder than it is in VS. And there appears to be a ton of free and paid GUI components for CBuilder; again with a C++ focus. I know C# + VS has a wealth of GUI controls.
UPDATE:
I just ran into a problem today that is same as the one mentioned in this forum:
http://qc.embarcadero.com/wc/qcmain.aspx?d=57631
[ILINK32 Warning] Warning: Error detected (ILI4536)
Make up your mind. Is it a warning or a god dam error?
Scroll all the way to the end where you find individuals modifying ILINK32.EXE to get it working again. As of this morning, our builds stop working. We're dead in the water as we scramble to understand and find out what to do about this.
Is this the kind of compiler/IDE you want to depend on? Again, this product has been around for more than a decade and it still has issues like this. I find this completely unacceptable. Crap product from a company that doesn't give a shit.
Not actually an answer, but I'll just leave it here:
It costs money (yes, VS too, but you already own that, don't you?)
It will be not too easy to migrate a big enough project to new IDE (and compiler), not to say about the people you work with and their habits (I would just quit probably).
There's a new compiler too, with its brand bugs and caveats to learn about. And it's much less widely used than VC++. However, it's based on Clang, which should support standards better than VC++, and be easier to port existing C++ code to.
The difficulty of migrating hugely depends on the nature of your project (is it GUI based, how deeply does it rely on MS VC++ being the compiler?)
There is nothing positive about Embarcadero XE, neither their aging IDE neither their aging compiler. Only use it if you're bound to it (legacy software) or if you want to do Delphi.
For C++, do yourself a favor and join 21st century : stick with something more powerful, versatile and modern such as VC++ or Qt.
This question is really a matter of personal opinion.
I personally HATE Visual Studio with a passion, I avoid it like the plague. My exposure to Eclipse has been limited to Java, but even then I've had a hard time working with it.
I have been using C++Builder for 15 years, since v3.0 all the way up to the latest XE6. Yes, it has quirks and limitations, but I still find it the easiest IDE for me to work with and be productive with, once you know how to work with (or around) them. Maybe my experience with it is hindering my ability to work with other IDEs, but so be it. I still prefer C++Builder over any other. But I only use it for Windows development (the VCL is very mature and robust), I don't do cross-platform development with it yet (FireMonkey still has a ways to go to evolve and mature). And I do use plenty of open-source projects with it. Yes, sometimes I have to tweak their projects and/or code to make them compile, but that it usually a one-time deal and then they work fine.
I'd suggest Eclipse.
As an IDE, it takes a little while to get used too, but it is well
worth the effort.
It's available for Mac OS, Linux and Windows.
You need to have Java installed on your computer, but that's
really a non - issue.
It supports Cygwin, MinGW, and the MicrosoftVisual C++ toolchains. The build in CDT Builder is pretty good too.
You can use it to develop for languages other than C++ (Java , JavaScript, PHP ..)
You can extend it's functionality by installing plugins
IT'S FREE!
Did I mention that it has a built in Web Browser ? Really useful for referring to online documentation, while coding.
1.
We have a solution over 1M LOC and VS2010 handles it ok. We especially like /MP switch for compiling on all available CPU cores.
You did not specify your hardware. If you don't yet run on at least i7-2600 + fast SSD, I suggest trying hardware upgrade first.
2.
I used to use Borland tools a lot in the past. Delphi was rather stable; C++ Builder was much more buggy. Couple of years ago I helped to upgrade old Delphi projects to newer Delphi IDE with some service packs installed. And it had bugs even in the basic File IO APIs which have worked since Turbo Pascal. We had to downgrade to a previous version. I expect that quality of C++ Builder won't be much better than of VS2010.
3.
You did not specify what exactly is slow. You may want to convert some projects into components compiled separately. Also make sure you use PCH.
Also it worth investigating if you abuse C++ inclusion model by including a lot of unneeded header files in each and every unit. If, after preprocessing, Intellisense and compiler have to deal with huge amount of code, no IDE can help.
I have not used Visual Studio 2010 Ultimate for C++, rather C# and C# web services development. That being said, as a test between VS 2010 Ultimate and C++Builder XE, I have created a simple VS C++ Windows Forms application to click a button and show "Hello World" through an event handler. Getting the button onto the VS Window Designer is okay, as long as you remember to access View | Toolbox. If not, it will take some time to track down where the visual components are hanging out.
For reasons that do not make any language sense, the button click event handler has a signature that looks like:
System::Void button1_Click(System::Object^ sender, System::EventArgs^ e) {
}
and it goes to the header file as one would expect. The ^ symbol makes little sense. Does using it tie into the CLI/CLR better? I expected a * to indicate a pointer.
After using the default Form1 (only header file created) and subsequently adding a new windows form, I finally obtained the respective cpp file. Maybe the C++ Windows Form Wizard has a bug. Who knows? Anyhow, when adding the button click event by double clicking the button in the designer, the cpp does not obtain the method in either cpp form I tested. Maybe this is normal, I do not know. The end result of this is that after trying to use the MessageBox function within the cpp, it only caused compilation errors. I am sure there is yet another header file that has to be in the include path. I spent no time tracking this down. Trying to set a label component text property caused compilation errors too. About 20 minutes later, I went to C++Builder XE3 in frustration.
In C++Builder, I have tested VCL Forms, FireMonkey Desktop, and FireMonkey Metropolis application creation from the project wizard. Sure enough, I have three different applications saying, "Hello World," in about three minutes total, all calling C++Builder's built in global shortcut function called ShowMessage("insert message here"). The timing could have been slightly different as I did not time it with a stop watch. It took longer to save files with meaningful names than the code itself: one line of typing in the respective click event body in each cpp (not the header).
The other main daily use gotcha with VS, for those of us who love the Brief key map, is that VS is highly challenging to configure into Brief. When doing heavy development in C#, I use C++Builder's editor in Brief mode, saving files as often as I want. VS does correctly detect file updates as you click back to the VS IDE.
On the slowness mentioned by the OP above, I suggest also looking very closely at the hardware platform relative to running Visual Studio. I have noticed that if the .Net framework is out of date, VS will be slow within the IDE. It does not seem to matter which language the project is in either. I use Visual Studio 2010 Ultimate on Parallels with Windows XP Pro, with 2 virtual cores. Generally, VS responds normally within the IDE. While using it, I am NOT thinking, "VS is soooo slow."
Regarding migrating a quarter million lines to C++Builder from VS, I am not sure whether VS event handlers will convert by some wizard or other migration tool. The ^ symbol, if consistently used in all event handlers, may not be a big deal for a regular expression conversion that is custom written. If the project is very thin on the user interface layer and heavy in business rules and data, converting to C++Builder should be relatively easy. I would expect some new coding for the new user interface click events passing the user interaction into the other layers. For prototyping, using data aware components are likely your best bet. In normal application running, expect to have the business rules layer use the STL and built in C++Builder data structures (even the AnsiString c_str() method) to interact with non data aware components. The performance and user experience will likely improve.
Start Edit
A big knock on C++Builder XE3 (note this is two releases behind the current one of five) is that the 64-bit Windows support is only for console applications. The knock is more from not being frequently broadcast on how to use the Add Platform sub-menu that appears when right clicking the mouse over the Target Platforms choice in the Project tree view. This quick method to add more platforms to a project after it may first be targeting 32-bit Windows is virtually painless. A new sub-dialog appears after clicking the sole sub-menu choice and a drop down box appears to select the new operating system and respective 32-bit or 64-bit versions. In my opinion, Embarcadero is not demonstrating often enough how simple it is to add other target platforms. So, to ease all developer's pain if this is not known in advance, I have found three web pages on the Embarcadero site. The first one has pretty pictures of creating a FireMonkey desktop application. Step 5 has the screen capture of the Target Platforms | Add Platform sub-menu choice for adding the Mac OS X platform. It is here titled Creating Your First FireMonkey Application for Desktop Platforms (C++): http://docwiki.embarcadero.com/RADStudio/XE2/en/Creating_Your_First_FireMonkey_Application_for_Desktop_Platforms_%28C%2B%2B%29
The more terse and no picture procedure is here titled Steps in Creating Cross-Platform Applications:
http://docwiki.embarcadero.com/RADStudio/XE2/en/Steps_in_Creating_Cross-Platform_Applications
The Windows centric procedure and a small screen capture is here titled 64-bit Cross-Platform Application Development for Windows:
http://docwiki.embarcadero.com/RADStudio/XE3/en/64-bit_Cross-Platform_Application_Development_for_Windows
I have found on an Embarcadero forum post that an upgrade to the Update 1 XE3 release from the original XE3 release has a Target Platform selection issue. There can be an internal path setting or two that is incorrect, and possibly having to change an original XE3 project file (.cbproj) to enable Win64. Apparently the original release project file has this set to false.
XE5 (note version five as of December 2013) is supposed to have 64-bit Windows support for both console and forms applications (e.g. VCL, FireMonkey Desktop, FireMonkey Metropolis), OS X, iOS (Android coming sometime soon). For the complete list, review the C++Builder feature matrix pdf for all of the XE5 details:
http://www.embarcadero.com/products/cbuilder/cbuilder-feature-matrix.pdf
Since the XE3 Update 1 has been shown to resolve Target Platform selection issues, when compared to the original XE3, there should not be any weird behaviors. I have also come across an Embarcadero post that states from a TeamB member that for mobile applications, the Target Platform choices are filtered such that mixing a desktop platform project with a mobile one is not allowed. So, if one wanted to try creating a desktop application and then with a mouse click force it into an iPhone, some other development tool will have to be used. C++Builder and/or Delphi will not attempt to squeeze desktop components onto a mobile device. You have to start with a mobile application project. Here is the forum link:
https://forums.embarcadero.com/thread.jspa?threadID=96371
(End Edit)
If curious about my overall background, I have used C++Builder since version one, Visual Studio .NET (C# 1.0) and Visual Studio 2010 Ultimate. It seems like Visual Studio concentrates on C# more than any other language. There are eighteen C# projects and fifteen C++ projects when selecting File | New Project. To reach the Visual Studio C++ project area, make sure to reach it by opening the "Other Languages" sub-tree.
In recent Internet posts between Visual Studio latest and greatest and C++Builder latest and greatest, purchase prices vary in the thousands of dollars. Even if never ever having an installation to upgrade either tool, C++Builder remains a bargain compared to Visual Studio. Please conduct thorough research before spending your hard earned cash. Hopefully both tools have 30-day trial installations to compare side by side, as your mileage may vary.

Windows ListView control (or similar) that can have multiple columns of checkboxes?

OK, so my Windows application involves a window that, among other things, has a list of objects in a pane. Each object has 8 boolean values that need to be determined — so I'd like a list of the objects, with eight columns of checkboxes after. I'm not using MFC, should that be relevant.
ListView looks the way I want it to, but apparently it doesn't accept checkboxes in SubItems (the LVS_EX_CHECKBOXES style only gives each row a checkbox on the left).
So what I need is some kind of alternative to ListView that does allow this. I've been looking, but nothing I've found seems to work.
I have seen reference to some DataGridView control, but I don't see that as an option in my Visual Studio 2010 "toolbox" — how does one access it, is it even available for non-MFC C++ projects? Most references to it seem to be for VB or C#.
Another thing I found is is this custom ListView, but it, again, seems to be for C# and not C++. I'd certainly accept suggestions on how to use this resource in my code, if there's a simple way to interface with the C# dialogue (I'm completely unfamiliar with C#).
Anyway, any thoughts, suggestions, or tips anyone has, would be most appreciated!
EDIT: This should maybe go in a new question, but it doesn't really seem deserving an entire question on its own: MFC seems to have more support for this kind of thing (insofar as most of the custom controls I can find to download are for MFC). My project does not actually require being non-MFC, it just is, at the moment. How much work am I looking at to convert it?
Well, I've taken the plunge and started using MFC; the CGridCtrl I downloaded seems to be working pretty well, though I still have a lot of work on it. I'm going to call this the answer, then, since there doesn't seem to be another forthcoming.

Display PNG on Visual Studio form

I'm working on a C++ application in Visual Studio (non-MFC) and was surprised to find that I can't add a PNG image to a dialog in the designer which seems a little backward as I can in most other IDEs that I've used. So either a) there is something I'm missing or b) there is a way to do it with code. I'm hoping that it's a but b would be fine.
Any advice suggestions on this?
Thanks,
J
Calling the dialog template editor a "designer" would be rather a stretch. It hasn't changed in the past 15 years or so, neither has the underlying API. An API that doesn't support PNGs, only BMPs. Getting PNG support is possible, GDI+ is available on any Windows version since 2000. But you have to code it yourself.
This is a solved problem, there are excellent class libraries available for UI development, along with tooling to do what you want to do. Qt is one of them if you want to stick with C++.