I am using Django-PayPal plugin (http://github.com/johnboxall/django-paypal/tree/master), which works almost fine with one problem.
I followed integration process and think that everything is the same as in the guide.
But there is the problem, that I always get the INVALID response flag. I will not be able to determine the sucessfull IPN.
Do you know, how to not get the INVALID response in the IPN?
I know it's an old question, but some might still benefit from this.
You have to have "Payment Review" disabled for the PayPal test account you use to make the payment with. Then it should work as expected.
I'm developing a site using this at the moment, and when using the sandbox I get the correct responses for the payment status, however the buyers email is always marked as invalid.
I believe it's due to the sandbox environment.
I kept getting an INVALID response from IPN for such a long time....only to figure out that I was using the live server (www.paypal.com) instead of the sandbox (sandbox.paypal.com).
Related
How do I get a registration code or otherwise solve this problem?
While writing this question, I realized the crux of this problem is the bottom-most part of this question: I'm not getting the popup I'm supposed to get and when I enter the URL in a browser it says invalid registration code.
I'm attempting to develop an Alexa Voice Service application. Website/companion service only. I have gone through the Reference Implementation Guide twice and have double checked that all of the setup has been done correctly.
This is the server error I get: invalid registration code. I never did anything with a registration code and can't seem to find anything about a registration code (relevant to Alexa) anywhere after googling quite a bit.
Listening on port 3000
error: { [InvalidRegistrationCode: The provided registration code was invalid.]
name: 'InvalidRegistrationCode',
message: 'The provided registration code was invalid.',
status: 401 }
Error: Can't set headers after they are sent.
Here's the client output:
vlcj: (DefaultMediaPlayer.java:183)
addMediaPlayerEventListener(listener=com.amazon.alexa.avs.AVSAudioPlayer$1#4b3a4950)
There was a problem connecting to the Companion Service. Trying again in 2 seconds. Please make sure it is up and running.
[DEBUG] joining on thread Thread[Timer-0,5,com.amazon.alexa.avs.AVSApp]
There was a problem connecting to the Companion Service.
Trying again in 2 seconds. Please make sure it is up and running.
The AVS launcher opens too, and when I record something and send it I get:
com.amazon.alexa.avs.AVSException: 403 Invalid Access Token
The instructions mention (at the very bottom of the reference guide) that I need to:
Please register your device by visiting the following website on any system and following the instructions: https://localhost:3000/provision/************** That URL is supposed to pop something up once the companion service but that hasn't happened.
Any thoughts on how can I fix this?
I was following a good document Project: Raspberry Pi + Alexa Voice Service at https://github.com/amzn/alexa-avs-raspberry-pi . It describes all steps very well.
Please take a look at the following steps:
3 - Getting started with Alexa Voice Service
3.1 Register for a free Amazon Developer Account
3.4 Register your product and create a security profile.
6 - Enable Security Profile
This thread on the Amazon developer forums seems related: http://forums.developer.amazon.com/forums/thread.jspa?threadID=11327&tstart=0
Quoted response:
There are a number of potential issues causing that error.
You might be sending an invalid scope. Are you sending "alexa:all" as
the scope? Or, your security profile might not be correctly linked. Is
it selected in the dropdown on the developer portal?
Are you getting an access token from the companion service, or is the
text box blank? If you're not getting an access token, check that your
device serial number matches between the companion service and the
java client. If you're getting an access token, the problem is more
likely with your security profile.
You should also look at these threads to see if they're helpful...
(links removed due to reputation requirement)
If that doesn't help, you'll probably have more luck asking the AVS team directly on their forum site.
I have been trying to post some achievements in game with following code:
FB.API(FB.UserId +"/"+achievementType,
Facebook.HttpMethod.POST,
AchievementCallback,formData);
but the result is sometimes posted on my activity log and sometimes it fails to post with the message
"Unknown SSL protocol error in connection to graph.facebook.com:8000" while sometimes it is sucessful with post ID. I have tested the achievement files from facebook API explorer and also from POSTMAN plugin and it successfully posted it using both of them with post ID. But when I try to post the achievement from Unity3d it fails sometimes and works sometimes. Does anyone know what i am doing wrong while posting using UnitySDK?
Note: I have hosted these files on Github. Example AchievementFileLink
If anyone has suggestion please let me know.
The workaround I found out for this is whenever the above error happens I again send the request in the callback method to post achievement and it gets published on my game activity successfully. This should not be the intended behaviour and is very bad practice but for time being ill take this as an answer.
I'm trying to post a feed on my wall or on the wall on some of my friends using Graph API. I gave all permissions that this application needs, allow them when i make the request from my page, I'm having a valid access token but even though this exception occurs and no feed is posted. My post request looks pretty good, the permissions are given. What do I need to do to show on facebook app that I'm not an abusive person. The last think I did was to dig in my application Auth Dialog to set all permission I need there, and to write why do I need these permissions.
I would be very grateful if you tell me what is going on and point me into the right direction of what do I need to do to fix this problem.
Had the same problem. I figured out that Facebook was refusing my shortlinks, which makes me a bit mad...but I get the point because its possible that shortlinks can be used to promote malicious content...so if you have shortlinks as part of your test, replace them w the full url...
I believe this message is encountered for one of the two reasons :
Your post contains malicious links
You are trying to make a POST request over a non-https connection.
The second one is not confirmed but I have seen that behavior. While same code in my heroku hosted app worked fine, it gave this #368 error on my 000webhost hosted .tk domain which wasn't secured by SSL
Just in case anyone is still struggling with this, the problem occurs when you put URLs or "action links" that are not in your own app domain, if you really need to post to an extarnal page, you'll have to post to your app first, then redirect from there using a script or something. hope that helps.
also it's better in my opinion to use HTTPS links, as sometimes i've seen a behaviour where http links would be rejected, but that's intermittent.
I started noticing that recently as well when running my unit tests. One of the tests I run is submitting a link that I know Facebook has blocked to verify that I handle the error correctly. I used to get this error:
Warning: This Message Contains Blocked Content: Some content in this message has been reported as abusive by Facebook...
But starting on July 4th, I started receiving this error instead:
(#368) The action attempted has been deemed abusive or is otherwise disallowed'
Both errors indicate that Facebook doesn't like what you're publishing.
I'm using Recaptcha within Django. I was using the following tutorial to integrate it in my web application: http://www.marcofucci.com/tumblelog/26/jul/2009/integrating-recaptcha-with-django/
The captcha doesn't show up on my machine. Instead of the captcha the following error message is displayed:
An internal error occurred: 4A6376441D250.ADE1949.3546A435
(I get a different code each time).
To which domain did you sign the recaptcha? If you entered "127.0.0.1" in the registration make sure you use this one and not "localhost".
Today, I got this error on one of my client's website.
It was working great but suddenly it stop working. Then upon googling I find this link and renewed my API key.
But after I switched to Secure (SSL Enabled) side of my website then It stops working again.
Then, In I got this function there
recaptcha_get_html(PUBLIC_KEY, $error, true);
The third argumentation use the SSL Server, I've to enable it.
This fixed everything for me.
I'm trying to implement Facebook Connect on a website with .NET MVC using C#.
I've followed the instructions here: http://wiki.developers.facebook.com/index.php/Trying_Out_Facebook_Connect step by step. I can make the login work as in that when I log in through the site I'm also logged into Facebook.
In order to work with this in the server I think I need to access the cookies Facebook is supposed to leave like:
APIKEY_user
APIKEY_session_key
...
as mentioned here http://wiki.developers.facebook.com/index.php/Verifying_The_Signature.
The thing is I'm not getting any of these cookies. I've googled and it seems like I'm the only person with this problem. Any ideas as to what I could be doing wrong ? Has this happened to anyone else ?
The issue was that I was developing locally using localhost.
I resolved the problem by changing the settings for the application to point to a certain web address instead of localhost and changing my hosts file lo point that same web address to 127.0.0.1
from the UI/client-side perspective, always insure you have the correct path indicated for the xd_receiver file in your FB.init() method.
Firecookie is very useful for seeing what Cookies are/aren't being set.