I have multiple text files which have various xpaths in their content. I want to use Notepad++ to add one new node in these xpaths, but there are some exceptions where I dont want to do it and due to them I'm struggling with preparing the right RegEx statement.
The goal is to add FpML node in xpath after allocation node with below exceptions:
If allocation is preeceded by CRD_Structured
If node after allocation is FT_Extension
Note that allocation is repetable node and therefore in these text files it might be denoted with specific index in [].
Examples:
allocation[Out1]/#fpmlVersion --> allocation[Out1]/FpML/#fpmlVersion
allocation[Int1]/trade --> allocation[Int1]/FpML/trade
allocation[Out1]/FT_Extension --> no change
pathString="allocation[]" --> no change
CRD_Structured/allocation[FindAllocOut1]/TS_ORDER_ALLOC --> no change
I would not try and find one regex/replace to achieve this. Instead I would make the change in several steps. In brief, I would (in steps 2 and 3 below) insert a marker string into allocation for all cases that should not be changed then (at step 4) insert the wanted text and finally (step 5) remove the marker string.
In more detail.
Choose a marker string that does not occur within the text. The string !!! is used below.
Regex replace (CRD_Structured/a)(llocation) with \1!!!\2.
Regex replace (a)(llocation\[\w+\]/FT_Extension) with \1!!!\2.
Replace (a)(llocation\[\w+\]/) with \1!!!\2FpML/.
Replace !!! with nothing.
Note that step 4 also inserts the marker string. This is to prevent multiple insertions of FpML/.
Item 4 in the question is not clear. It may be that an addition to steps 2 and 3 is needed. This addition would regex replace ^(a)(llocation\[\w*\])$ with \1!!!\2. This assumes that the path string is the complete line.
Related
We have an old, grown project with thousands of php files and need to clean it up.
Throughout the whole project we do have a lot of function calls similar to:
trans('somestring1');
trans("SomeString2");
trans('more_string',$somevar);
trans("anotherstring4",$somevar);
trans($tx_key);
trans($anotherKey,$somevar);
All of those are embedded into the code and represent translation keys. I would like to find a way to extract all "translation keys" in all occurrences.
The PHP project is in VS Code, so a RegEx Search would be helpful to list the results.
Or I could search through the project with any other tool you would recommend
However I would also need to "export" just the strings to a textfile or similar.
The ideal result would be:
somestring1
SomeString2
more_string
anotherstring4
$tx_key
$anotherKey
As a bonus - if someone knows, how I could get the above list including filename where the result has been found - that would be really fantastic!
Any help would be greatly appreciated!
Update:
The RegEx I came up with:
/(trans)+\([^\)]*\)(\.[^\)]*\))?/gim
list the full occurrence - How can I just get the first part of the result (between Single Quotes OR between Double Quotes OR beginning with $)
See here: regexr.com/548d4
Here are some steps to get exactly what you want. Using this you can do a find and replace on your search results!
So you could do sequential regex find/replaces in the right circumstances.
The replace can be just within the search results editor and not affect the underlying files at all - which is what you want.
You can also have the replace action actually edit the underlying files if you wish.
[Hint: This technique can also make doing a find item a / replace with b in files that contain term c much easier to do.]
(1) Open a new search editor: Ctrl+Shift+P
(That command is currently unbound to a keybinding.)
(2) Paste this regex into the Search input box (with the regex option .* selected):
`(.*?)(\btrans\(['"]?)([^,'")]+)(.*)` - a relatively simple regex
regex101 demo
See my other answer for a regex to work with up to 6 entries per line:
(\s*\d+:\s)?((.*?)(\btrans\(['"]?)([^,'")]*)((.*?)(\btrans\(['"]?)([^,'")]*))?((.*?)(\btrans\(['"]?)([^,'")]*))?((.*?)(\btrans\(['"]?)([^,'")]*))?((.*?)(\btrans\(['"]?)([^,'")]*))?((.*?)(\btrans\(['"]?)([^,'")]*))?)(.*)
(3) You will get a list of files with the search results. Now open a Find widget Shift+F in this Search editor.
(4) Put the same regex into that Find input. Regex option selected. Put $3 into the Replace field. This only replaces in this Search editor - not the original files (although that can be done if you want it in some case). Replace All.
If using the 1-6 version regex, replace with:
$1$5 $9 $13 $17 $21 $25
(5) Voila. You can now save this Search Editor as a file.
The first answer works for one desired capture per line as in the original question. But that relatively simple regex won't work if there are two or more per line.
The regex below works for up to 6 entries per line, like
trans('somestring1');
stuff trans("SomeString2"); some content trans("SomeString2a");more stuff [repeat, repeat]
But it doesn't for 7+ - you'll need a regex guru for that.
Here is the process again with a twist of using a snippet in the Search Editor instead of a Find/Replace. Using a snippet allows more control over the formatting of the final result.
(1) Open a new search editor: Ctrl+Shift+P (That command is currently unbound to a keybinding.)
(2) Paste this regex into the Search input box (with the regex option .* selected):
`((.*?)(\btrans\(['"]?)([^,'")]*)((.*?)(\btrans\(['"]?)([^,'")]*))?((.*?)(\btrans\(['"]?)([^,'")]*))?((.*?)(\btrans\(['"]?)([^,'")]*))?((.*?)(\btrans\(['"]?)([^,'")]*))?((.*?)(\btrans\(['"]?)([^,'")]*))?)(.*)`
regex101 demo
(3) You will get a list of files with the search results. Now select all your results individually with Ctrl+Shift+L.
(4) Trigger this keybinding:
{
"key": "alt+i", // whatever keybinding you like
"command": "editor.action.insertSnippet",
"when": "editorTextFocus",
"args": {
"snippet": "${TM_SELECTED_TEXT/((.*?)(\\btrans\\([\\'\\\"]?)([^,\\'\\\")]*)((.*?)(\\btrans\\([\\'\\\"]?)([^,\\'\\\")]*))?((.*?)(\\btrans\\([\\'\\\"]?)([^,\\'\\\")]*))?((.*?)(\\btrans\\([\\'\\\"]?)([^,\\'\\\")]*))?((.*?)(\\btrans\\([\\'\\\"]?)([^,\\'\\\")]*))?((.*?)(\\btrans\\([\\'\\\"]?)([^,\\'\\\")]*))?)(.*)/$4${8:+\n }$8${12:+\n }$12${16:+\n }$16${20:+\n }$20${24:+\n }$24/g}"
}
},
That snippet will be applied to each selection in your search result. This part ${8:+\n } is a conditional which adds a newline and some spaces if there is a capture group 8 - which would be a second trans(...) on a line.
Demo: (unfortunately, it doesn't properly show the Ctrl+Shift+L selecting all lines individually or the Alt+i snippet trigger)
I'm working on a project where I'm converting an implementation of a binary tree to an AVL tree, so I have a few files that contain lines like:
Tree<int>* p = new Tree<int>(*t);
all over the place. The goal I have in mind is to use a vim regex to turn all instances of the string Tree into the string AVLTree, so the line above would become:
AVLTree<int>* p = new AVLTree<int>(*t);
the regex I tried was :%s/Tree/AVLTree/g, but the result was:
AVLTree<int>* p = new Tree<int>(*t);
I looks to me like when vim finds something to replace on a line it jumps to the next one, so is there a way to match multiple strings on the same line? I realize that this can be accomplished with multiple regex's, so my question is mostly academic.
Credit on this one goes to Marth for pointing this out. My issue was with vim's gdefault. By default it's set to 'off', which means you need the /g tag to make your search global, which is what I wanted. I think mine was set to 'on', which means without the tag the search is global, but with the tag the search is not. I found this chart from :help 'gdefault' helpful:
command 'gdefault' on 'gdefault' off
:s/// subst. all subst. one
:s///g subst. one subst. all
:s///gg subst. all subst. one
I have a text file in Notepad++ that contains about 66,000 words all in 1 line, and it is a set of 200 "lines" of output that are all unique and placed in 1 line in the basic JSON form {output:[{output1},{output2},...}]}.
There is a set of characters matching the RegEx expression "id":.........,"kind":"track" that occurs about 285 times in total, and I am trying to either single them out, or copy all of them at once.
Basically, without some super complicated RegEx terms, I am stuck because I can't figure out how to highlight all of them at once, and also the Remove Unbookmarked Lines feature does not apply because this is all in one line. I have only managed to be able to Mark every single occurrence.
So does this require a large number of steps to get the file into multiple lines and work from there, or is there something else I am missing?
Edit: I have come up with a set of Macro schemes that make the process of doing this manually work much faster. It's another alternative but still takes a few steps and quite some time.
Edit 2: I intended there to be an answer for actually just highlighting the different sections all at once, but I guess that it not possible. The answer here turns out to be more useful in my case, allowing me to have a list of IDs without everything else.
You seem to already have a regex which matches single instances of your pattern, so assuming it works and that we must use Notepad++ for this:
Replace .*?("id":.........,"kind":"track").*?(?="id".........,"kind":"track"|$) with \1.
If this textfile is valid JSON, this opens you up to other, non-notepad++ options, like using Python with the json module.
Edited to remove unnecessary steps
First, I'm using EditPadPro for my regex cleaning, so any answers given should work within that environment.
I get a large spreadsheet full of data that I have to clean every day. I've managed to get it down to a couple of different regexes that I run, and this works... but I'm curious to see if it's possible to reduce down to a single regex.
Here is some sample data:
3-CPC_114851_70095_70095_CAN-bre
3-CPC_114851_70095_70095_CAN
b11-ao1-113775-bre
b7-ao-114441
b7-ao-114441-bre
b7-ao1-114441
b7-ao1-114441-bre
http://go.nlvid.com/results1/?http://bo
go.nlv/results1/?click
b4-sm-1359
b6-sm-1356-bre
1359_195_1453814569-bre
1356_104_1456856729
b15-rad-8905
b15-rad-8905-bre
Here is how the above data needs to end up:
114851-bre
114851
113775-bre
114441
114441-bre
114441
114441-bre
http://go.nlvid.com/results1/
go.nlv/results1/
sm-1359
sm-1356-bre
sm-1359-bre
sm-1356
rad-8905
rad-8905-bre
So, there are numerous rules, such as:
In cases of more than 2 underscores, the result needs to contain only the value immediately after the first underscore, and everything from the dash onwards.
In cases where the string contains "-ao-", "-ao1-", everything prior to the final numeric string should be removed.
If a question mark is present, everything from the mark onwards should be removed.
If the string contains "-sm-" or "-rad-", everything prior to those alpha strings should be removed.
If the string contains 2 underscores, averything after the first numeric string up to a dash
(if present) should be removed, and the string "sm-" should be prepended.
Additionally there is other data that must be left untouched, including but not limited to:
113535|24905|24905
as well as many variations on this pattern of xxxxxx|yyyyy|zzzzz (and not always those string lengths)
This may be asking way too much of regex, I'm not sure as I'm not great with it. But I've seen some pretty impressive things done with it, so I thought I'd put this out to the community and see what you come back with.
Jonathan, I can wrap all of those into one regex, except the last one (where you prepend sm- to a string that does not contain sm). It is not possible in this context, because we cannot capture "sm" to reuse in the replacement, and because there is no "conditional replacement" syntax in EPP.
That being said, you can achieve what you want in EPP with two regexes and one macro to chain the two.
Here is how.
The solution below is tested in EPP.
Regex 1
Press Ctrl + Sh + F to enter Search / Replace mode
Enter the following Search and Replace in the appropriate boxes
At the top right of the Search bar, click the Favorite Searches pull-down, select "Add", give it a name, e.g. Regex 1
Search:
(?mx)^
(?=(?:[^_\r\n]*?_){3})[^_\r\n]+?_([^_\r\n]+)[^-\r\n]+(-[^\r\n]+)?
|
[^\r\n]*?-ao1?-\D*([^\r\n]+)
|
([^\r\n?]*)(?=\?)[^\r\n]+
|
[^\r\n]*?-((?:sm|rad)-[^\r\n]+)
Replace:
\1\2\3\4\5
Regex 2
Same 1-2-3 steps as above.
Search
^(?!(?:[^_\r\n]*?_){3})(?=(?:[^_\r\n]*?_){2})(\d+)(?:[^-\r\n]+(-[^\r\n]+)?)
Replace
sm-\1\2
Chaining Regex 1 and Regex 2
Top menu: Macros, Record Macro, give it a name.
Click the Favorite searches pulldown, select Regex 1
Hit Replace All.
Click the Favorite searches pulldown, select Regex 2
Hit Replace All.
Macros, Stop recording.
Whenever you want to do your sequence of replacements, pull it by name under the Macros menu.
Testing This
I have tested my "Jonathan macro" on your input. Here is the result:
114851-bre
114851
113775-bre
114441
114441-bre
114441
114441-bre
http://go.nlvid.com/results1/
go.nlv/results1/
sm-1359
sm-1356-bre
sm-1359-bre
sm-1356
rad-8905
rad-8905-bre
Try this:
Toggle the Search Panel : SHIFT+CTRL+F
SEARCH: .*?((?:sm-|rad-)?(?:(?:\d+|[\w\.]+\/.*?))(?:-\w+)?$)
REPLACE: $1
Check REGEX and WORDS
Click Replace All or Hit CTRL+ALT+F3
Check the image below:
Given the following file path:
/Users/Lawrence/MyProject/some/very/interesting/Code.scala
I would like to generate the following using a single regex replace (the root can be a constant):
some.very.interesting
This is for the purpose of generating a snippet for Sublime Text which can automatically insert the correct package/namespace header for my scala/java classes :)
Sublime Text uses the following syntax for their regex replace patterns (aka 'substitutions'):
{input/regex/replace/flags}
Hence why an iterative approach cannot be taken - it has to be done in one pass! Also, substitutions cannot be nested :(
If you know the maximum number of nested folders.You can specify that in your regex.
For 1 to 3 nested folders
Regex:/Users/Lawrence/MyProject/(\w+)/?(\w+)?/?(\w+)?/[^/]+$
Replace:$1.$2.$3
For 1 to 5 nested folders
Regex:/Users/Lawrence/MyProject/(\w+)/?(\w+)?/?(\w+)?/?(\w+)?/?(\w+)?/[^/]+$
Replace:$1.$2.$3.$4.$5
Given the constraints this is only thing you can do
Input
/Users/Lawrence/MyProject/some/very/interesting/Code.scala
Regex
^/Users/Lawrence/MyProject/[^/]+/[^/]+/[^/]+/Code.scala
or
^/[^/]+/[^/]+/[^/]+/([^/]+)/([^/]+)/([^/]+)/
Replace
\1.\2.\3
Update
This gets you closer, but not exactly it:
Regex
(^/Users/Lawrence/MyProject/|/Code\.scala$|/)
Replacement
.
Output would be:
.some.very.interesting.
Without multiple replacements in a single line and without recursive back references it's going to be hard.
You might have to do a second replacement, replacing something like this with an empty string (if you can):
(^\.|\.$)