I want to create a forest plot with the metan ado in Stata. This works fine so far - but I can't solve two problems:
How do I manage that the value range on the x-axis does not already start at the headings but afterwards?
How do I label the column on the far right with "p-value"?
Can someone assist with this?
The code I used is:
metan or_num lci_num uci_num, label (namevar=Variable) by(sort_variable) xlabel(0,1,2,3,4,5,6) xsize(10) ysize(8) null(1) effect(Odds ratio) labtitle(Subgroup) nohet nobetween nooverall nosubgroup nosecsub lcols() rcols(p_num) astext(40) boxscale(0)
Related
I use Oracle APEX (v22.1) and on a page I created a (line) chart, but I have the following problem for the visualization of the graphic:
On the y-axis it is not possible to show the values in the format 'hh:mi' and I need a help for this.
Details for the axis:
x-axis: A date column represented as a string: to_char(time2, 'YYYY-MM')
y-axis: Two date columns and the average of the difference will be calculated: AVG(time2 - time1); the date time2 is the same as the date in the x-axis.
So I have the following SQL query for the visualization of the series:
SELECT DISTINCT to_char(time2, 'YYYY-MM') AS YEAR_MONTH --x-axis,
AVG(time2 - time1) AS AVERAGE_VALUE --y-axis
FROM users
GROUP BY to_char(time2, 'YYYY-MM')
ORDER BY to_char(time2, 'YYYY-MM')
I have another problem to solve it in another way: I am not familiar with JavaScript, if the solution is only possible in this way. Because I started new with APEX, but I have seen in different tutorials that you can use JS. So, when JS is the only solution, I would be happy to get a short description what I must do on the page.
(I don't know if this point is important for this case: The values time1 and time2 are updated daily.)
On the attributes of the chart I enabled the 'Time Axis Type' under Settings
On the y-axis I change the format to "Time - Short" and I tried with different pattern like ##:## but in this case you see for every value and also on the y-axis the value '01:00' although the line chart was represented in the right way. But when I change the format to Decimal the values are shown correct as the line chart.
I also tried it with the EXTRACT function for the value like 'EXTRACT(HOUR FROM AVG(time2 - time1))|| ':' || EXTRACT(MINUTE FROM AVG(time2 - time1))' but in this case I get an error message
So where is my mistake or is it more difficult to solve this?
ROUND(TRUNC(avg(time2 - time1)/60) + mod(avg(time2 - time1),60)/100, 2) AS Y
will get close to what you want, you can set Y Axis minimum 0 maximum 24
then 12.23 means 12 hour and 23 minutes.
I have the below graph created by Proc sgplot. Since the labels of values on the xaxis is too long, I want to put them in two lines. For example, instead of "T2 to T3 (Pre-pandemic to initial pandemic)", I'd like to have
line 1: T2 to T3
line 2: (Pre-pandemic to initial pandemic)" .
I have created these labels using proc format. Thanks for your help.
Consider the options FITPOLICY and SPLITCHAR for the XAXIS statement.
For you, this would be
xaxis ... fitpolicy=split splitchar="(";
For further details, consult the documentation.
I have a data in Excel and I have uploaded in power bi, created a visualisation using a chart which looks like -
blank, CP, Jj10 are basically my y axis and dashes are my bars of horizontal chart. I have tried to show how my chart looks like because I don't get any other option
(Blank)-------------998
CP-----------56
Jj10--------44
0BN--------------77
Hi-po---2
Naas-------21
There is a column named performance (sheet_name=Empl_data) and what I want is to replace the blanks with Non-GT in power bi with creating a new column.
What my output should look like -
(Non-GT)-------------998
CP-----------56
Jj10--------44
0BN--------------77
Hi-po---2
Naas-------21
I have tried this -
Non-GT = IF(ISBLANK('Empl_data'[performance]),"Non-GT",'Empl_data'[performance])
What i get is
Non-GT----------------964
(Blank)-------------34
CP-----------56
Jj10--------44
0BN--------------77
Hi-po---2
Naas-------21
I just want to replace blanks with Non-TSG completely but still it shows blank. Please help me out to solve the problem and please let me know if I have made clear what my prblm is.
My data -
Empl_id
Empl_name
performance
99807
Somman paul
0076
Richards.M
8870
Maheen Josef.T
11209
Dojar Farah
6651
Macklegn Sagoe
Hi-po
551
Cada Farez
Jj10
12
Qwezy Goha
Hi-po
6567
Beheriop Produse
CP
2227
John semmers
0BN
656
Majeeio .f
80100
Drejju Yan
Is it actually Blank where it is showing nothing? First confirm there are spaces or really null in the data, then apply conditions as bellow-
Non-GT =
IF(
'Empl_data'[performance] = BLANK() || 'Empl_data'[performance] = "",
"Non-GT",
'Empl_data'[performance]
)
Q: Where you are transforming data with that condition? Power Query Editor? Or creating Measure or Calculated column?
I am trying to get two plots on one figure using matplotlib's subplots() command. I want the two plots to share an x-axis and have one legend for the whole plot. The code I have right now is:
observline = mlines.Line2D([], [], color=(1,0.502,0),\
markersize=15, label='Observed',linewidth=2)
wrfline=mlines.Line2D([], [], color='black',\
markersize=15, label='WRF',linewidth=2)
fig,axes=plt.subplots(2,1,sharex='col',figsize=(18,10))
df08.plot(ax=axes[0],linewidth=2, color=(1,0.502,0))\
.legend(handles=[observline,wrfline],loc='lower center', bbox_to_anchor=(0.9315, 0.9598),prop={'size':16})
axes[0].set_title('WRF Model Comparison Near %.2f,%.2f' %(lat,lon),fontsize=24)
axes[0].set_ylim(0,360)
axes[0].set_yticks(np.arange(0,361,60))
df18.plot(ax=axes[1],linewidth=2, color='black').legend_.remove()
plt.subplots_adjust(hspace=0)
axes[1].set_ylim(0,360)
axes[1].set_yticks(np.arange(0,361,60))
plt.ylabel('Wind Direction [Degrees]',fontsize=18,color='black')
axes[1].yaxis.set_label_coords(-0.05, 1)
plt.xlabel('Time',fontsize=18,color='black')
#plt.savefig(df8graphfile, dpi = 72)
plt.show()
and it produces four figures, each with two subplots. The top is always empty. The bottom is filled for three of them with my 2nd dataframe. The indices for each dataframe is a datetimeindex in the format YYYY-mm-DD HH:MM:SS. The data is values from 0-360 nearly randomly across the whole time series, which is for two months.
Here is an example of each figure produced:
I wonder if you could help me figure it out a quite simple question of how I can save an extracted statistic from a regression in a separate dataset (or file), and also add more statistics from the other regression to it later?
For example, the statistic from one regression can be extracted as e(f) and from another one is also as e(f).
Roger Newson's parmest is great for dealing with "resulsets," which are Stata datasets created from the output of a Stata command. The help file has a nice example of combining three regressions into a single file that I modified here to include R^2 [stored in e(df_r)]:
sysuse auto, clear
tempfile tf1 tf2 tf3
parmby "reg price weight", lab saving(`"`tf1'"', replace) idnum(1) idstr(M1) escal(r2)
parmby "reg price foreign", lab saving(`"`tf2'"', replace) idnum(2) idstr(M2) escal(r2)
parmby "reg price weight foreign", lab saving(`"`tf3'"', replace) idnum(3) idstr(M3) escal(r2)
drop _all
append using `"`tf1'"' `"`tf2'"' `"`tf3'"'
list idnum idstr es_1, noobs nodis