How to send string in utf-8 to irc server? - c++

I have an irc bot written in c++ with the use of Qt library. I store console text input in std::string , and then i'm using QSocket to post it on irc chat. But the problem is im want to use special signs (polish letters), which dont appear properly on chat. What is the problem?
The way i use QSocketis:
void Socket::poster(const QByteArray send)
{
mSocket->write(send);
mSocket->flush();
mSocket->reset();
}
QByteArray i create from std::string and std::cin
he code's long so i only post the parts crucial for the specific functonality which fails
Socket class (which is the main class in the program, providing data to other classes):
#############################################################
protected:
QSslSocket *mSocket;
--------------------
connect(mSocket, SIGNAL(readyRead()),
this, SLOT(readyReady())
--------------------
//console input:
QThread *thread = new QThread;
consoleInput = new ConsoleInput();
consoleInput->startConsole(thread, mSocket);
consoleInput->moveToThread(thread);
thread->start();
-------------------
void Socket::readyReady()
{
QString data;
data2 = data;
mSocket->ReadOnly;
while(mSocket->canReadLine())
{
data = mSocket->readLine();
}
mSocket->reset();
}
---------------------
void Socket::poster(const QByteArray send) //sending to irc from many classes news, console itd
{
mSocket->write(send);
mSocket->flush();
mSocket->reset();
}
-------------------
ConsoleInput class (which takes console input, which is later sent to irc chat):
###############################
void ConsoleInput::run()
{
std::cout << "!ConsoleInput::run()" << "\n";
while(1){
std::string input;
std::getline(std::cin, input);
determineOption(input);
if(input[0] != '/' || input[0] != '\\')
postInput(input);
input.clear();
}
}
----------------------------------
void ConsoleInput::postInput(std::string &input)
{
if(input[0]=='/')
return; //this prevents bot poting "/command" to channel
std::string lineToPost;
std::cout << "!lineToPost - input " << input << "\n";
ColourManipulation c;
lineToPost = "PRIVMSG #grunge " + c.addColours(input) + "\r\n";
emit mySignal(QByteArray::fromStdString(lineToPost)); // problem
}

Make sure std::cin/cout can accept & show non-ascii characters
Check the code can accept & show non-ascii characters:
std::string input;
std::getline(std::cin, input);
std::cout << input;
If you don't have problems with non-ascii characters in console itself
You need:
Know in which encoding the data originally comes from console to std::string &input.
std::string type per se uses no encoding -- it will return the bytes
you put in it -
What encoding does std::string.c_str() use?.
Import the bytes into QString using necessary encoding convertion
Export the resulting QString to UTF-8 encoded QByteArray (QByteArray itself is just an array of bytes too).
Write the QByteArray to a socket.
You can write something like the following:
/*
From doc: QTextCodec::codecForLocale()
Returns a pointer to the codec most suitable for this locale.
The codec will be retrieved from ICU where that backend is in use,
otherwise it may be obtained from an OS-specific API.
In the latter case, the codec's name may be "System".
*/
QTextCodec *codec = QTextCodec::codecForLocale(); // In most cases, it is not UTF-8
// Or set the encoding explicitly:
//QTextCodec *codec = QTextCodec::codecForName("Shift-JIS"); // put your input encoding here
QTextDecoder *decoder = codec->makeDecoder();
QByteArray chunk = QByteArray::fromStdString(input);
QString string = decoder->toUnicode(chunk);
delete decoder;
emit mySignal(string.toUtf8());
Be note that you can avoid std::string and use QString only:
QString is more comfortable to use, and, once received the data correctly, it always stores data in the same known format internally, despite of std::string, which has no idea what data it stores.
How to read from console to QString directly:
QTextStream in(stdin);
in.setCodec(<your console codec>);
QString input = in.readLine();
See QTextCodec and QTextStream.
Read also The Absolute Minimum Every Software Developer Absolutely, Positively Must Know About Unicode and Character Sets (No Excuses!)

Related

How to get datas send by Protobuf with a QTcpSocket [duplicate]

This question already has answers here:
Correct way to losslessly convert to and from std::string and QByteArray
(3 answers)
Closed 3 years ago.
I'm new on protobuf and QTcpServer/Socket and I want to read my .proto data send by my client, but when i'm reading the data, the QString done is empty
For now, I just want to send a message that say "hello" when my client is connected. The QByteArray returning by QTcpSocket::readAll is NOT empty, but the QString created with the bytes is empty.
Here is my .proto ultra basic one :
syntax = "proto3";
package protobuf;
message Message
{
string content = 2;
}
write functions :
// When i'm connecting to the server i create a PlayerManager and i call this function with message = "hello"
void Server::sendMessageToPlayer(const PlayerManager& playerManager, const QString& message)
{
auto messageProto = new protobuf::Message;
messageProto->set_content(message.toStdString());
playerManager.socketManager()->sendData(*messageProto);
}
// I serialize the protobuf
template <typename protobufType>
void sendData(const protobufType& protobuf)
{
std::string dataToSend;
if (!protobuf.SerializeToString(&dataToSend))
{
// This never pass -> the protobuf is well serialize
qDebug() << "The protobuf send cannot be serialized, please, make sure that you used protobufs correctly";
}
// Before i write it
write(dataToSend);
}
void SocketManager::write(const std::string& data)
{
// I tried this but it's not working either
// QTextCodec* codec = QTextCodec::codecForName("CP1251");
// QString codecData = codec->toUnicode(data.c_str());
QByteArray block;
QDataStream out(&block, QIODevice::WriteOnly);
out.setVersion(QDataStream::Qt_5_10);
out << data.c_str();
_tcpSocket->write(block);
qDebug() << block;
}
read functions :
void SocketManager::read()
{
QByteArray bytes = _tcpSocket->readAll();
qDebug() << bytes;
// Doesn't work either
// QTextCodec* codec = QTextCodec::codecForName("CP1251");
// QString data = codec->toUnicode(bytes);
QString data(bytes);
qDebug() << data;
emitMessageType(data.toStdString());
}
void SocketManager::emitMessageType(const std::string& data)
{
// Protobufs can parse an empty string (and so, emit signal), to avoid that, the function will tell you if data
// are empty, then return
if (data.empty())
{
qDebug() << "Datas are empty";
return;
}
protobuf::Message message;
if (message.ParseFromString(data))
{
emit messageProtoReceived(message);
return;
}
qDebug() << "The data send cannot be translate, please, make sure that you used protobufs correctly";
}
So, I would like that my client receive "hello" when he is connected but my debug are :
Server side :
"\x00\x00\x00\b\x12\x05hello\x00"
Client side
"\x00\x00\x00\b\x12\x05hello\x00"
""
Datas are empty
When I use QTextCodec (commented lines of the code) the debug are :
Server side :
"\x00\x00\x00\x0E\x00\x12\x00\x05\x00h\x00""e\x00l\x00l\x00o"
Client side
"\x00\x00\x00\x0E\x00\x12\x00\x05\x00h\x00""e\x00l\x00l\x00o"
"\u0000\u0000\u0000\u000E\u0000\u0012\u0000\u0005\u0000h\u0000e\u0000l\u0000l\u0000o"
The data send cannot be translate, please, make sure that you used protobufs correctly
So the QByteArea is parse, but protobuf don't succeed to parse the given string.
Thanks for reading, I hope youc ould help me
Not sure if it's the case but the documentation says that the default constructor of a QString that takes a QByteArray:
The given byte array is converted to Unicode using fromUtf8(). Stops copying at the first 0 character, otherwise copies the entire byte array.
So probably, you are having some troubles whit the conversion.
As alternative, you can try ParseFromArray method, instead of converting a QByteArray into a std::string.
const auto byteArray = _tcpSocket->readAll();
protobuf::Message message;
if (!message.ParseFromArray(byteArray.data(), byteArray.size())) {
qDebug() << "Failed to parse person.pb.";
}
out << data.c_str() inside SocketManager::write might discard at first \0. Try converting to QByteArray as described at Correct way to losslessly convert to and from std::string and QByteArray to ensure the whole string is sent.

Qt and GSM encoding

Hi i am developping an open source sms application and i am using Qt. But now i have various problem with the encodings.
I am using this library for various pdu encoding and decoding https://sourceforge.net/projects/pdulib/
In gsm there 3 main encodings Default 7bit alphabet, UCS2 and 8bit data. So when For 7bit encoding the library expect std::string argument so i am passing it like this
QString message = lineEdit->toPlainText();
std::string msg_to_pass = message.toStdString();
The sms is correctly sended but when there is accent characters the sms arrives with bad characters like 'C?' the sign of bad charset/encoding. Note that it is the phone that show it. So decoding error is very low.
But when i am using the UCS2 encoding
QString message = lineEdit->toPlainText();
std::wstring msg_to_pass = message.toStdWString();
because the library requires std::wstring for UCS2 the characters with accent got printed well. But the problem is when i am decoding a sms received. I have modified function of this library to suit my needs but again characters with accent have a problem. Here is the function
template<class MsgT>
void PrintUserData(const MsgT& msg, QString &message)
{
if (MsgT::DefaultAlphabet == msg.alphabet())
{
message = QString::fromStdString(msg.template userData<typename MsgT::DefaultUserData>().userData());
std::cout << "User Data: " << msg.template userData<typename MsgT::DefaultUserData>().userData() << std::endl;
}
else if(MsgT::UCS2Alphabet == msg.alphabet())
{
QTextStream ts(stdout);
message = QString::fromStdWString( msg.template userData<typename MsgT::UCS2UserData>().userData());
qInfo()<< message;
std::wcout << L"User Data: " << msg.template userData<typename MsgT::UCS2UserData>().userData() << std::endl;
}
else if(MsgT::EightBitDataAlphabet == msg.alphabet())
{
qInfo()<< "3";
const std::vector<unsigned char>& data = msg.template userData<typename MsgT::EightBitUserData>().userData();
std::cout << "User Data: ";
PrintBinary(data.begin(), data.end());
std::cout << std::endl;
}
}
I have tested various pdu lib for C++ and this seems to be the best for me.
My think is that i am doing something bad with the std::string and std::wstring but i can't figure what.
Also i know that UCS2 is UTF-16 but i have read that there is small differences.
My locale is FR (French)
I am using Qt 5.9
Sorry for my english.

toLocal8bit send over TCP

Im creating TCP Server/Client application in QT Creator framework. I want to get some data from UI input field and send it over TCP.
Im doing something like this in client application:
void MainWindow::on_btn_login_clicked()
{
QByteArray text = (ui->login_input->text()).toLocal8Bit();
char* out = text.data();
connection->ConnectAndSendData(out);
}
and in the ConnectAndSendData function:
void TcpConnect::ConnectAndSendData(const char* data)
{
socket = new QTcpSocket(this);
int port = 1234;
socket->connectToHost("localhost", port);
if(socket->waitForConnected(3000))
{
qDebug() << "connected to s. localhost at port " << port;
socket->flush();
socket->write(data, sizeof(data));
qDebug() << data << "\n";
socket->waitForReadyRead();
char* serverresponse;
socket->read(serverresponse, 128);
if(serverresponse == MESSAGE_LOGINRQ)
socket->write(data);
socket->flush();
socket->close();
}
else
{
/**/
}
}
and the data in line socket->write(data, sizeof(data)); is properly send to server, but when server echoes it, it looks like "something/x00/x00/x00/x00" or somethinglike that. Also when i to do something like this:
#define MESSAGE_WANTLOGIN "wanlogin"
socket->write(MESSAGE_WANTLOGIN, sizeof(MESSAGE_WANTLOGIN));
message is messed up with those null signs.
on the server side receiving data look as simple as:
void Thread::readyRead()
{
socket->flush();
QByteArray data = socket->readAll();
qDebug() << "data received: " << data;
if(data == MESSAGE_WANTLOGIN)
{
socket->write(MESSAGE_LOGINRQ);
} else
{
qDebug() << "error not messageloginrq";
}
}
and like u can assume, though i send "wanlogin" message, server receiving something like "wanlogin/x00/x00" and this if obviously returns false.
this trash is applied on the end of data, and this impossible to check what message was send. The other thing is that maximum size of send data is 8 chars, but also to data of this length trash is applied so it looks like "wanlogin/x00/x00"; however, when i type more chars, for example 10, the send data is just cut to 8 signs, with no /x00s.
So my question is how to clear data from those /x00s and how to send more than 1 byte of information(i need it e.g. to send login and password of user). Sorry if there's some stupid mistake, its my first client/server application which also using multithreading for each client.
sizeof(data) is 4 or 8 depending if you are on a 32-bit or 64-bit machine. It is not the size of your data, but the size (in byte) of a pointer.
So what happens is that your actual wanlogin is in fact a 6 character string, and you end up sending 2 more bytes. In this case you are lucky: the char array returned by data() is null-terminated, so you have one extra 0 that you can access, but accessing the second 0 is undefined behavior i.e anything can happen.
The solution is to use strlen() instead of sizeof. Or, better, to directly call write() with a QByteArray by changing ConnectAndSendData(const char* data) to ConnectAndSendData(const QByteArray &data).
void MainWindow::on_btn_login_clicked()
{
const QByteArray text = (ui->login_input->text()).toLocal8Bit();
connection->ConnectAndSendData(text);
}
void TcpConnect::ConnectAndSendData(const QByteArray & data)
{
socket = new QTcpSocket(this);
quint16 port = 1234;
socket->connectToHost("localhost", port);
if(socket->waitForConnected(3000))
{
qDebug() << "connected to s. localhost at port " << port;
socket->write(data);
...
}
...
}

Get the checksum of an open QIODevice

i need the checksum of a file and found this, which works perfectly fine. Now i want to change this function to take a pointer to a QIODevice that has been opened before with the following lines:
if (!file.open(QFile::ReadOnly | QFile::Text))
{
...
}
This is passed to read (reader.read(&file);) as device:
bool XmlReader::read(QIODevice* device)
{
QByteArray b = fileChecksum(device);
...
}
This is my implementation of fileChecksum. It returns a checksum, but i am caught in a loop forever and i am getting an xml parse error. What am i doing wrong here?
QByteArray XmlReader::fileChecksum(QIODevice* device)
{
if (device->isOpen())
{
QCryptographicHash hash(QCryptographicHash::Sha256);
if (hash.addData(device)) {
return hash.result();
}
}
return QByteArray();
}
EDIT
right after QByteArray b = fileChecksum(device); i do:
qDebug() << "Checksum: " << b.toHex();
whick keeps printing and printing and printing...
The parse error is: premature end of document which is rubbish.
Hope this helps.
Since the lines of code that eventually caused the error are not in view I can only speculate about what happened.
The function fileChecksum called hash.addData(device) which read the QIODevice until the end and kept the cursor position there.
Most likely you tried to read from the QIODevice afterwards which would explain the premature end of documen message.
As a fast workaround you can just try to reset the position afterwards with
auto pos = device->pos();
QByteArray b = fileChecksum(device);
device->seek(pos);
But you should only read the data once if you can (to support non random-access QIODevices too). For example you can store the result in a QBuffer and use that as a QIODevice. Like this:
bool XmlReader::read(QIODevice* device)
{
QByteArray contents = device->readAll();
QBuffer buffer(&contents);
device = &buffer;//you can also just use &buffer from here on out instead of overwriting the pointer
QByteArray b = fileChecksum(device);
device->reset();
/* ... further reads from device here */
}

QLocalSocket to QLocalServer message being corrupted during transfer

I haven't been able to find a similar issue, so here goes:
I'm sending a QString from a QLocalSocket to a QLocalServer across two applications. The receiving (QLocalServer) application does receive the message, but it seems the encoding is completely wrong.
If I send a QString = "x" from the QLocalSocket (client), I'm getting a foreign (Chinese?) symbol in the QLocalServer. My code is literally copied from the Nokia Developer website
If I printout the message via QDebug, I get "??". If I fire it in a message box, Chinese characters are printed. I've tried re-encoding the received message to UTF-8, Latin1, etc., with no luck.
Code is as follows:
//Client
int main(int argc, char *argv[])
{
QLocalSocket * m_socket = new QLocalSocket();
m_socket->connectToServer("SomeServer");
if(m_socket->waitForConnected(1000))
{
//send a message to the server
QByteArray block;
QDataStream out(&block, QIODevice::WriteOnly);
out.setVersion(QDataStream::Qt_4_7);
out << "x";
out.device()->seek(0);
m_socket->write(block);
m_socket->flush();
QMessageBox box;
box.setText("mesage has been sent");
box.exec();
...
}
//Server - this is within a QMainWindow
void MainWindow::messageReceived()
{
QLocalSocket *clientConnection = m_pServer->nextPendingConnection();
while (clientConnection->bytesAvailable() < (int)sizeof(quint32))
clientConnection->waitForReadyRead();
connect(clientConnection, SIGNAL(disconnected()),
clientConnection, SLOT(deleteLater()));
QDataStream in(clientConnection);
in.setVersion(QDataStream::Qt_4_7);
if (clientConnection->bytesAvailable() < (int)sizeof(quint16)) {
return;
}
QString message;
in >> message;
QMessageBox box;
box.setText(QString(message));
box.exec();
}
Any help is highly appreciated.
The client is serializing a const char* while the server is deserializing a QString. These aren't compatible. The former literally writes the string bytes, the latter first encodes to UTF-16. So, I guess on the server side, the raw string data "fff" is being decoded into a QString as though it were UTF-16 data... perhaps resulting in character U+6666, 晦.
Try changing the client to also serialize a QString, i.e.
// client writes a QString
out << QString::fromLatin1("fff");
// server reads a QString
QString message;
in >> message;