I want to be able to see my formulas with actual data in them to help with troubleshooting.
So I want to get a regular expression that will put quotation marks around all non-cell-reference items.
I tried
Original formula
=IFERROR(
(($Q10*24*Q$2)*($O10*$O$2)*( ($T10+$V10)*$S$2)*($P10*$P$2))/($R10*$R$2),"Spec missing")
Desired output
="IFERROR(
(("&$Q10&"*24*"&Q$2&")*("&$O10&"*"&$O$2&")*( ("&$T10&"+"&$V10&")*"&$S$2&")*("&$P10&"*"&$P$2&"))/("&$R10&"*"&$R$2&"),""Spec missing"")"
When I copy the output and paste as text, I want to get a formula in the cell that outputs text looks like this:
="IFERROR(
((0.363194444444444*24*1)*(17348*1)*( (4.096+18.874368)*1)*(2519*1))/(3*1),""Spec missing"")"
I can then copy that down and that helps me troubleshoot the formula (or the data) if something weird is happening.
Solution I found:
I copy the formula and paste it in F10 (with an ' in front of it so it comes up as a text string), then paste the following:
="="""®EXREPLACE(regexreplace(F2,"\""","\""\"""),"(\$?[A-Z]{1,2}\$?\d+)","""&$1&""")&""""
Description: i) The first regexreplace (going from innermost to outermost) I use to escape all the quotes in the formula by replacing all double quotes with two double quotes, so that quotes in the original formula won't mess things up. ii) The second REGEXREPplace finds things that match the "$A1" (or "A1" or "A$1") pattern, allowing up to two letters (eg. "AA1" will work as well). iii) I put "="""& before and &"""" and after to finish the formula.
One problem I still have with this setup is that it doesn't handle cell references in another worksheet, such as "Rankings!A1". I'm not sure what sort of regular expression I'd be able to use that could match everything before the "!" that could be part of a sheet name without starting to match other things . . .
Related
Link To Spreadsheet
Sheet!1Name - Names are in Single Column
Sheet!2Names - Names are in First Name, Last Name columns.
What I'm trying to do is basically remove any suffixes, special characters, and spaces, capitalize that information, and combine it with information from another field.
I was able to figure out how to piece together some regex that seems to effectively get rid of suffixes and removes special characters. It's below. That's where my skill set stops.
={"PlayerKey";ARRAYFORMULA(UPPER(IF(ISBLANK(C2:C8),,PROPER(TRIM(REGEXREPLACE(C2:C8," Jr\.$| J$| Sr\.$| S$|IV$|III$|II$|\.|-|'",""))))))}
I'm having trouble nesting formulas - i believe what i need to do is nest both concat and substitute but not sure if that's the method to get the "Desired Output example" that is in the sheet. I'm also having trouble understanding what order to do things, which is why i'm having trouble with 2Name i think.
How's this in A1 of the new tab called MK.Help?
=ARRAYFORMULA({"Player Key";UPPER(TRIM(REGEXREPLACE(IF(MID(C2:C8,2,1)=".",INDEX(SPLIT(C2:C8," "),,1),LEFT(C2:C8))&D2:D8," Jr\.$| J$| Sr\.$| S$|IV$|III$|II$|\.|-|'",""))&E2:E8)})
I am trying to use formulas to find a row in my google spreadsheet document, however I have got a weird problem.
I am not able to find values when a cell contains a number (without any other characters).
Consider the following case
I have got two values
A1 - 32323232323
A2 - 323-23232-323
When I use the following formula
=FILTER(A:E,REGEXMATCH(B:B,"323-23232-323"))
It works fine, it successfully finds A2 value, however when I try to use the following formula
=FILTER(A:E,REGEXMATCH(B:B,"32323232323"))
It doesn't match any row, and I also tried the following formula
ADDRESS(MATCH("32323232323",B:B,0),1)
It doesn't work either, it only works when I remove quotes like that
ADDRESS(MATCH(32323232323,B:B,0),1)
But this doesn't work with REGEXMATCH.
Is there any way I can match numbers using a regex expression (exact number, without wildcards) ?
Thanks
=FILTER(A:A,REGEXMATCH(REGEXREPLACE(TO_TEXT(A:A),"-",""), "32323232323"))
to get both 323-23232-323 and 32323232323.
=FILTER(A:E,REGEXMATCH(TO_TEXT(B:B),"32323232323"))
to get number 32323232323.
Notes:
Converting to_text is a key here.
Change columns to yours.
I want to check if specific cell contain only numbers.
I know I should use RegExMatch but I get an error.
This is what I wrote : =if(RegExMatch(H2,[0-9]),"a","b")
I want it to say : write 'a' if H2 contains only numbers, 'b' otherwise.
Thank you
Try this:
=IF(ISNUMBER(H2,"A","B"))
or
=if(isna(REGEXEXTRACT(text(H2,"#"),"\d+")),"b","a")
One reason your match isn't working also - is that it in interpreting your numbers as text. the is number function is a bit more consistent, but if you really need to use regex, then you can see in the second formula where im making sure the that source text is matching against a string.
Your formula is right, simple you forget the double quotes at regexmatch function's regular_expression .
This is the right formula: =if(RegExMatch(B20,"[0-9]"),"a","b")
=REGEXREPLACE(“text”,”regex”,”replacement”)
It spits out the entire content but with the regular expression matched content replaced. =REGEXREPLACE(A2,[0-9],"a")
=REGEXREPLACE(A2,![0-9],"b")//not sure about not sign.
will fill a cell with the same text as A2, but with the 0-9 becoming an a!
First, I'm using EditPadPro for my regex cleaning, so any answers given should work within that environment.
I get a large spreadsheet full of data that I have to clean every day. I've managed to get it down to a couple of different regexes that I run, and this works... but I'm curious to see if it's possible to reduce down to a single regex.
Here is some sample data:
3-CPC_114851_70095_70095_CAN-bre
3-CPC_114851_70095_70095_CAN
b11-ao1-113775-bre
b7-ao-114441
b7-ao-114441-bre
b7-ao1-114441
b7-ao1-114441-bre
http://go.nlvid.com/results1/?http://bo
go.nlv/results1/?click
b4-sm-1359
b6-sm-1356-bre
1359_195_1453814569-bre
1356_104_1456856729
b15-rad-8905
b15-rad-8905-bre
Here is how the above data needs to end up:
114851-bre
114851
113775-bre
114441
114441-bre
114441
114441-bre
http://go.nlvid.com/results1/
go.nlv/results1/
sm-1359
sm-1356-bre
sm-1359-bre
sm-1356
rad-8905
rad-8905-bre
So, there are numerous rules, such as:
In cases of more than 2 underscores, the result needs to contain only the value immediately after the first underscore, and everything from the dash onwards.
In cases where the string contains "-ao-", "-ao1-", everything prior to the final numeric string should be removed.
If a question mark is present, everything from the mark onwards should be removed.
If the string contains "-sm-" or "-rad-", everything prior to those alpha strings should be removed.
If the string contains 2 underscores, averything after the first numeric string up to a dash
(if present) should be removed, and the string "sm-" should be prepended.
Additionally there is other data that must be left untouched, including but not limited to:
113535|24905|24905
as well as many variations on this pattern of xxxxxx|yyyyy|zzzzz (and not always those string lengths)
This may be asking way too much of regex, I'm not sure as I'm not great with it. But I've seen some pretty impressive things done with it, so I thought I'd put this out to the community and see what you come back with.
Jonathan, I can wrap all of those into one regex, except the last one (where you prepend sm- to a string that does not contain sm). It is not possible in this context, because we cannot capture "sm" to reuse in the replacement, and because there is no "conditional replacement" syntax in EPP.
That being said, you can achieve what you want in EPP with two regexes and one macro to chain the two.
Here is how.
The solution below is tested in EPP.
Regex 1
Press Ctrl + Sh + F to enter Search / Replace mode
Enter the following Search and Replace in the appropriate boxes
At the top right of the Search bar, click the Favorite Searches pull-down, select "Add", give it a name, e.g. Regex 1
Search:
(?mx)^
(?=(?:[^_\r\n]*?_){3})[^_\r\n]+?_([^_\r\n]+)[^-\r\n]+(-[^\r\n]+)?
|
[^\r\n]*?-ao1?-\D*([^\r\n]+)
|
([^\r\n?]*)(?=\?)[^\r\n]+
|
[^\r\n]*?-((?:sm|rad)-[^\r\n]+)
Replace:
\1\2\3\4\5
Regex 2
Same 1-2-3 steps as above.
Search
^(?!(?:[^_\r\n]*?_){3})(?=(?:[^_\r\n]*?_){2})(\d+)(?:[^-\r\n]+(-[^\r\n]+)?)
Replace
sm-\1\2
Chaining Regex 1 and Regex 2
Top menu: Macros, Record Macro, give it a name.
Click the Favorite searches pulldown, select Regex 1
Hit Replace All.
Click the Favorite searches pulldown, select Regex 2
Hit Replace All.
Macros, Stop recording.
Whenever you want to do your sequence of replacements, pull it by name under the Macros menu.
Testing This
I have tested my "Jonathan macro" on your input. Here is the result:
114851-bre
114851
113775-bre
114441
114441-bre
114441
114441-bre
http://go.nlvid.com/results1/
go.nlv/results1/
sm-1359
sm-1356-bre
sm-1359-bre
sm-1356
rad-8905
rad-8905-bre
Try this:
Toggle the Search Panel : SHIFT+CTRL+F
SEARCH: .*?((?:sm-|rad-)?(?:(?:\d+|[\w\.]+\/.*?))(?:-\w+)?$)
REPLACE: $1
Check REGEX and WORDS
Click Replace All or Hit CTRL+ALT+F3
Check the image below:
I recently discussed editors with a co-worker. He uses one of the less popular editors and I use another (I won't say which ones since it's not relevant and I want to avoid an editor flame war). I was saying that I didn't like his editor as much because it doesn't let you do find/replace with regular expressions.
He said he's never wanted to do that, which was surprising since it's something I find myself doing all the time. However, off the top of my head I wasn't able to come up with more than one or two examples. Can anyone here offer some examples of times when they've found regex find/replace useful in their editor? Here's what I've been able to come up with since then as examples of things that I've actually had to do:
Strip the beginning of a line off of every line in a file that looks like:
Line 25634 :
Line 632157 :
Taking a few dozen files with a standard header which is slightly different for each file and stripping the first 19 lines from all of them all at once.
Piping the result of a MySQL select statement into a text file, then removing all of the formatting junk and reformatting it as a Python dictionary for use in a simple script.
In a CSV file with no escaped commas, replace the first character of the 8th column of each row with a capital A.
Given a bunch of GDB stack traces with lines like
#3 0x080a6d61 in _mvl_set_req_done (req=0x82624a4, result=27158) at ../../mvl/src/mvl_serv.c:850
strip out everything from each line except the function names.
Does anyone else have any real-life examples? The next time this comes up, I'd like to be more prepared to list good examples of why this feature is useful.
Just last week, I used regex find/replace to convert a CSV file to an XML file.
Simple enough to do really, just chop up each field (luckily it didn't have any escaped commas) and push it back out with the appropriate tags in place of the commas.
Regex make it easy to replace whole words using word boundaries.
(\b\w+\b)
So you can replace unwanted words in your file without disturbing words like Scunthorpe
Yesterday I took a create table statement I made for an Oracle table and converted the fields to setString() method calls using JDBC and PreparedStatements. The table's field names were mapped to my class properties, so regex search and replace was the perfect fit.
Create Table text:
...
field_1 VARCHAR2(100) NULL,
field_2 VARCHAR2(10) NULL,
field_3 NUMBER(8) NULL,
field_4 VARCHAR2(100) NULL,
....
My Regex Search:
/([a-z_])+ .*?,?/
My Replacement:
pstmt.setString(1, \1);
The result:
...
pstmt.setString(1, field_1);
pstmt.setString(1, field_2);
pstmt.setString(1, field_3);
pstmt.setString(1, field_4);
....
I then went through and manually set the position int for each call and changed the method to setInt() (and others) where necessary, but that worked handy for me. I actually used it three or four times for similar field to method call conversions.
I like to use regexps to reformat lists of items like this:
int item1
double item2
to
public void item1(int item1){
}
public void item2(double item2){
}
This can be a big time saver.
I use it all the time when someone sends me a list of patient visit numbers in a column (say 100-200) and I need them in a '0000000444','000000004445' format. works wonders for me!
I also use it to pull out email addresses in an email. I send out group emails often and all the bounced returns come back in one email. So, I regex to pull them all out and then drop them into a string var to remove from the database.
I even wrote a little dialog prog to apply regex to my clipboard. It grabs the contents applies the regex and then loads it back into the clipboard.
One thing I use it for in web development all the time is stripping some text of its HTML tags. This might need to be done to sanitize user input for security, or for displaying a preview of a news article. For example, if you have an article with lots of HTML tags for formatting, you can't just do LEFT(article_text,100) + '...' (plus a "read more" link) and render that on a page at the risk of breaking the page by splitting apart an HTML tag.
Also, I've had to strip img tags in database records that link to images that no longer exist. And let's not forget web form validation. If you want to make a user has entered a correct email address (syntactically speaking) into a web form this is about the only way of checking it thoroughly.
I've just pasted a long character sequence into a string literal, and now I want to break it up into a concatenation of shorter string literals so it doesn't wrap. I also want it to be readable, so I want to break only after spaces. I select the whole string (minus the quotation marks) and do an in-selection-only replace-all with this regex:
/.{20,60} /
...and this replacement:
/$0"¶ + "/
...where the pilcrow is an actual newline, and the number of spaces varies from one incident to the next. Result:
String s = "I recently discussed editors with a co-worker. He uses one "
+ "of the less popular editors and I use another (I won't say "
+ "which ones since it's not relevant and I want to avoid an "
+ "editor flame war). I was saying that I didn't like his "
+ "editor as much because it doesn't let you do find/replace "
+ "with regular expressions.";
The first thing I do with any editor is try to figure out it's Regex oddities. I use it all the time. Nothing really crazy, but it's handy when you've got to copy/paste stuff between different types of text - SQL <-> PHP is the one I do most often - and you don't want to fart around making the same change 500 times.
Regex is very handy any time I am trying to replace a value that spans multiple lines. Or when I want to replace a value with something that contains a line break.
I also like that you can match things in a regular expression and not replace the full match using the $# syntax to output the portion of the match you want to maintain.
I agree with you on points 3, 4, and 5 but not necessarily points 1 and 2.
In some cases 1 and 2 are easier to achieve using a anonymous keyboard macro.
By this I mean doing the following:
Position the cursor on the first line
Start a keyboard macro recording
Modify the first line
Position the cursor on the next line
Stop record.
Now all that is needed to modify the next line is to repeat the macro.
I could live with out support for regex but could not live without anonymous keyboard macros.