I just tried to compile the latest AzerothCore on Debian 9 and did not touch the source, just pulled it and used exactly the sh described in the installation guide. CMake gives me that error:
CMake Error: The following variables are used in this project, but they are set to NOTFOUND.
Please set them or make sure they are set and tested correctly in the CMake files:
ACE_INCLUDE_DIR (ADVANCED)
Debian 9 with the latest AzerothCore. Ace is definitely installed with their latest version.
Expected: No error.
Actual Result: Error.
sudo apt-get update then do sudo apt-get install libace-6.* libace-dev
current version working for myself at this time is 6.3.3.
Also, I don't use the sh installer, so not sure if that could be your issue.
I just use cmake ../ -DCMAKE_INSTALL_PREFIX=/home/youruser/azeroth-server/ -DCMAKE_C_COMPILER=/usr/bin/clang -DCMAKE_CXX_COMPILER=/usr/bin/clang++ -DTOOLS=0 -DSCRIPTS=1
I started with the TrinityCore requirements and sadly forgot to install the libace needed for AzerothCore. Needed to to sudo apt-get install libace-6.* libace-dev like DJ Boxer suggested.
Related
I have been trying to install ONOS using Bazel's new version i.e., Bazel-5.1.1 in Ubuntu 20.04 LTS for mininet/containernet. I have been having issues regarding Bazel build onos command. I have searched for the installation process all over and tried as well many. But have similar issues. Is there any link or article where there is a clear step-by-step procedure to do so? I am having a task for the installation which I need to finish in a week. Any help would be appreciated. Thanks in Advance.
The error I get:
sendate#sendate04:~/onos$ bazel build onos
ERROR: The project you're trying to build requires Bazel 3.7.2 (specified in /home/sendate/onos/.bazelversion), but it wasn't found in /home/sendate/.bazel/bin.
Bazel binaries for all official releases can be downloaded from here:
https://github.com/bazelbuild/bazel/releases
You can download the required version directly using this command:
(cd "/home/sendate/.bazel/bin" && curl -fLO https://releases.bazel.build/3.7.2/release/bazel-3.7.2-linux-x86_64 && chmod +x bazel-3.7.2-linux-x86_64)
I tried doing the steps given like downloading the same version and also tried to change the version in the .bazelversion file. But nothing succeeded in Bazel build.
1.bazel —-version
If you didn’t download bazel version 3.7.x download it. If you download java version 11.You need create java default symbolic link. It will be /bar/lib/jam. . Test echo $PATH it will give ONON path. Then run sudo apt install —-reinstall build-essential. Build onos
I have installed Opencv 2.4.8 on my Linux(ubuntu 14.04) machine and it works fine. When I'm trying to test SURF descriptor using sample code from the online official documentation the compiler gave me no such file or director error for #include<opencv2/nonfree/nonfree.hpp>
.
From this link i have tried to update the opencv library for the nonfree modules with but still no success.
To make history short how can include SURF descriptor to my project or any idea how to fix this?
sudo apt-get update
sudo add-apt-repository --yes ppa:xqms/opencv-nonfree
sudo apt-get update
sudo apt-get install libopencv-nonfree-dev
You need to enable OPENCV_ENABLE_NONFREE when you build your opencv version.
I guess it goes like this in the prompt command cmake -D OPENCV_ENABLE_NONFREE=ON ..
But if you prefer cmake GUI see the picture below.
picture
After downloading and untar the file "boost_1_56_0.tar.gz", I have installed Boost C++ library version "boost_1_56_0" in CentOS Linux.
I have run the following commands to install:
sudo ./bootstrap.sh --prefix=/usr/local
sudo ./b2 install.
I also added two paths to the PATH variable:
export PATH=$PATH:/usr/local/include/:/usr/local/lib/
It has been successfully installed. However when I checked the version it showed different version:
$ cat /usr/include/boost/version.hpp | grep "BOOST_LIB_VERSION"
#define BOOST_LIB_VERSION "1_33_1"
I have tried to install boost_1_55_0 as well in another folder but unfortunately still it shows version 1_33_1.
Can anyone here tell me how I can fix this issue?
Because of this issue, I am unable to configure Graph_tool; it shows following error:
checking for boostlib >= 1.53.0... configure: error: We could not detect the boost libraries (version 1.53 or higher). If you have a staged boost library (still not installed) please specify $BOOST_ROOT in your environment and do not give a PATH to --with-boost option. If you are sure you have boost installed, then check your version number looking in . See http://randspringer.de/boost for more documentation>
Your bootstrap path is /usr/local. Make sure your BOOST_ROOT points to your bootstrapped folder, not the installed 1.33 version.
I have been trying to install GLFW and GLFW3, using Terminal to install
sudo apt-get install GLFW
sudo apt-get install GLFW3
Whenever I do so, I get results such as
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package glfw3
I have been trying to install GLFW for two hours now, and I'm getting a bit impatient. Also I'm very new to Linux (Mint), so I apologize if I'm doing something stupid...
EDIT:
No matter what I try, my program encounters
/home/myusername/Desktop/basic_window.cpp:11:21: fatal error: GL/glfw.h: No such file or directory
#include <GL/glfw.h>
^
compilation terminated.
Having a frustrating time with this, not sure why this is much more complicated than the other libraries I've installed so far.
I have been trying to install GLFW and GLFW3, using Terminal to install...
On Mint 17, it looks like you need to install libglfw2. So perform a sudo apt-get install libglfw2.
If you plan on developing against it, then install libglfw-dev instead. Notice the lack of a version number.
If interested, perform apt-cache search glfw
In Debian-based systems such as Ubuntu and Mint, library packages typically have names that begin with "lib", and development headers (for compiling new programs that use the library) are in a separate package whose name ends with "-dev".
Ubuntu 14.04 has GLFW 2 packaged as libglfw2 and libglfw-dev. Mint doesn't seem to have those packages, but you can probably use the Ubuntu ones since Mint 17 is based on Ubuntu 14.04.
GLFW 3 isn't in Ubuntu 14.04, but it looks like it'll be in 14.10 (as libglfw3 and libglfw3-dev).
Unless you really need GLFW 3 specifically, you're probably better off sticking with the packaged GLFW 2. Packages get easy automatic upgrades; compiling stuff "by hand" is a good way to end up with lots of cruft in your system with no automatic upgrade or uninstall.
Download GLFW source packages from their website.
Extract the folder glfw-3.0.4 from the tarball
Open console
Navigate to the folder you just extracted and go inside of it using cd
Type cmake . (be sure you include the dot)
If cmake . fails, then type the following as root:
apt-get install cmake
If you don't think you're root then type the following:
sudo apt-get install cmake
If that doesn't work then type the following as root, or add sudo if you're not root:
apt-get install build-essential cmake
Once you have cmake installed, navigate back to the folder and try cmake . again.
I am trying to install Qt 4.6.2 on ubuntu. When I run the configure script I get the following error message "You don't seem to have 'make' or 'gmake' in your PATH. cannot proceed".
On echo of the PATH variable I get
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
on running the command
$which make , I get
/usr/bin/make
How do I proceed with this issue? I seem to have the make in the path env variable but still the config script throws cannot find make or gmake?
It not the problem of make or gmake, nor PATH, Just because you unzip the tarball without -a option. so, to solve this problem, just use 'unzip -a *.zip', it will be fine.
I recently encountered this error in a fedora32 docker container, because the which utility was not installed. I was compiling Qt 5.12.9.
dnf install which fixed the problem.
You should have been installed build-essentials but did not restart try either to restart or type:
export MAKE=/usr/bin/make
and make sure with echo $MAKE
I downloaded the source again. I am able to run configure without any problems. Seems like there was an issue with the earlier source.
you should install build essentials
sudo apt-get install build-essential
and typesudo apt make install