So i am using Wso2 and when i try to create i get this error
[LDAP: error code 65 - no structural object class provided]
I also got some other mapping errors before that but after mapping correctly the Wso2 attributes to LDAP attributes they went away but now i am stuck on this error. From searching around i found that this error means that the operation that i am trying to do is violating the object class rules for the entry.
How can i get more about what the violation is about so that i can do something about it ?
You can try enabling debug logs for user.core component. In <product_home>/repository/conf/log4j.properties file, uncomment the following entry and restart the server. Then add a user again and check the wso2carbon.log file.
#log4j.logger.org.wso2.carbon.user.core=DEBUG
Related
I added some custom error messages to the APIM according to documentation https://apim.docs.wso2.com/en/4.0.0/troubleshooting/error-handling/ - I created custom file in
<API-M_HOME>/repository/deployment/server/synapse-configs/default/sequences and added references to that file in some of the default files in that directory (so that it is called to transform error message).
Everything seemed to be working just fine until the restart of WSO2 - after that, changes made to default files were present, but the custom file was removed, so that custom error message handling didn't work.
I resolved this by adding non-removable attribute (chattr +i) to the file, but I wonder is there other, more elegant way to prevent the file from being deleted every time restart is being made?
There are 'template' files placed in: <API-M_HOME>/repository/resources/apim-synapse-config. Maybe, those files are overriding files in the ../synapse-configs/default/ location.
Second thing, which came on my mind, is using specific High Avability scenario. Where artifacts are shared files in system as the content synchronization mechanism, it can override local changes.
At the startup gateway removes these files. You can add the following configuration to the deployment.toml and place the file in the sequence directory.
Sample Config:
[apim.sync_runtime_artifacts.gateway.skip_list]
apis = ["api1.xml","api2.xml"]
endpoints = ["endpoint1.xml"]
sequences = ["post_with_nobody.xml"]
local-entries = ["file.xml"]
For your case:
[apim.sync_runtime_artifacts.gateway.skip_list]
sequences = ["name_of_the_file.xml"]
Refer - https://apim.docs.wso2.com/en/latest/install-and-setup/setup/distributed-deployment/deploying-wso2-api-m-in-a-distributed-setup/#configure-the-gateway-nodes
I run wso2 apim 2.0.1 snapshot on windows, and when i modify subscription tier and save, it report below exception, and although the bill plan changed , but the API still display FREE label.
[2016-08-12 15:30:02,504] ERROR - EventProcessorAdminService Error while deleting the execution plan file
org.wso2.carbon.event.processor.core.exception.ExecutionPlanConfigurationException: Error while deleting the execution plan file
at org.wso2.carbon.event.processor.core.internal.util.EventProcessorConfigurationFilesystemInvoker.delete(EventProcessorConfigurationFilesystemInvoker.java:124)
......
Caused by: java.nio.file.InvalidPathException: Illegal char <:> at index 2: /D:/emman/PROJECT/AA/apimgmt/wso2am-2.0.1-SNAPSHOT/repository/deployment/server/\executionplans
at sun.nio.fs.WindowsPathParser.normalize(WindowsPathParser.java:182)
at sun.nio.fs.WindowsPathParser.parse(WindowsPathParser.java:153)
at sun.nio.fs.WindowsPathParser.parse(WindowsPathParser.java:77)
at sun.nio.fs.WindowsPath.parse(WindowsPath.java:94)
at sun.nio.fs.WindowsFileSystem.getPath(WindowsFileSystem.java:255)
at java.nio.file.Paths.get(Paths.java:84)
at org.wso2.carbon.event.processor.core.internal.util.EventProcessorUtil.validateFilePath(EventProcessorUtil.java:387)
at org.wso2.carbon.event.processor.core.internal.util.EventProcessorConfigurationFilesystemInvoker.delete(EventProcessorConfigurationFilesystemInvoker.j
ava:109)
... 65 more
[2016-08-12 15:30:02,539] ERROR - ThrottlePolicyDeploymentManager Error while deploying policy to global policy server.Error while deleting the execution plan file
[2016-08-12 15:30:02,541] INFO - subscription-policy-edit:jag SubscriptionPolicy [policyName=Gold, description=Allows 5000 requests per minute, defaultQuotaPolicy=QuotaPolicy [type=requestCount, limit=RequestCountLimit [requestCount=5000,
toString()=Limit [timeUnit=min, unitTime=1]]]rateLimitCount=-1, tenantId=-1234,ratelimitTimeUnit=NA]
As per your logs, error happens due to invalid file path below.
/D:/emman/PROJECT/AA/apimgmt/wso2am-2.0.1-SNAPSHOT/repository/deployment/server/\executionplans
I had a look at code. It reads the first part of this path from <RepositoryLocation> tag of carbon.xml file. By default, it should look like this.
<RepositoryLocation>${carbon.home}/repository/deployment/server</RepositoryLocation>
Please verify if you have the same in carbon.xml. If you are getting this error with the same config, please change it to the absolute path like below and try again.
D:\emman\PROJECT\AA\apimgmt\wso2am-2.0.1-SNAPSHOT\repository\deployment\server
To make your path more linux-like I used this trick.
Share your carbon home folder. Change carbon.xml setting RepositoryLocation in //machinenaam/share.
We have consumed a third party web service and are trying to invoke it from an winform application. However when I instantiate the web service the following System.InvalidOperationException exception is thrown:
System.InvalidOperationException was unhandled
Method notesservicev1.exportNotes can not be reflected.
The XML element 'GetNotesInfoRequest' from namespace
'http://www.excelacom.com/century/cm/notes/service/webservice/request/v1'
references a method and a type.
Change the method's message name using WebMethodAttribute or change the
type's root element using the XmlRootAttribute.
I got a link:
Method 'XYZ' cannot be reflected
But I am not getting what exactly I should do ?
After checking the above link I get the solution.
GetNotesInfoRequest is used by two Web Service methods as there RequestElementName. That's why I was getting the ambiguity.
Thanks :)
i am using the Redmine.3.1.0.Then i have installed redmine_re plugin.But when i try to save the requirement using the Redmine_re plugin i am getting the following error
NameError (undefined local variable or method `connection' for #<ReArtifactRelationship:0x800ddb0>):
lib/plugins/acts_as_list/lib/active_record/acts/list.rb:220:in `bottom_item'
lib/plugins/acts_as_list/lib/active_record/acts/list.rb:214:in `bottom_position_in_list'
lib/plugins/acts_as_list/lib/active_record/acts/list.rb:205:in `add_to_list_bottom'
lib/redmine/sudo_mode.rb:63:in `sudo_mode'
pls suggest how to resolve this error
#ste26054
I did not develop this plugin, but I think the support for redmine 3.1.0 is only partial at the moment. (And you may get other errors even after fixing this).
I believe you are getting an error because of this: Deprecate #connection in favour of accessing it via the class
And your error is related to this file:
In this method:
def scope_condition()
"#{connection.quote_column_name("source_id")} = #{quote_value(self.source_id)}
AND
#{connection.quote_column_name("relation_type")} = #{quote_value(self.relation_type)}"
end
Try to add self.class. in front of connection
You may have to repeat this for other files in the code.
If your changes are working, I would suggest you to submit a pull request on their plugin github page :)
I have a bug in my 404 setup. I know that because, when I try to reach some page which doesn't exist, I get my server error template. But that templates is useless because it doesn't give me any debug info. In order to get django's debug page, I need to set DEBUG=True in settings file. But if I do that, bug doesn't appear because django doesn't try to access my buggy 404 setup. So what do you guys think? This is in my root urls file:
handler404 = 'portal.blog.views.handlenotfound' And this is in portal.blog.views.handlenotfound:
def handlenotfound(request):
global common_data
datas = {
'tags' : Tag.objects.all(),
'date_list' : Post.objects.filter(yayinlandi=True).dates("pub_date","year")
}
data.update(common_data)
return render_to_response("404.html",datas)
Edit:
I guess I also need to return a HttpResponseNotFound right?
If I had to debug this kind of errors, I would either
temporarily turn the handler into a simple view served by a custom url, so that django's internal mechanisms don't get into the way, or
(temporarily) wrap the handler code in a try..except block to log any error you may have missed
Anyway, are you sure your handler doesn't get called if DEBUG=true?
data.update(common_data) should be datas.update(common_data).
(Incidentally, data is already plural: the singular is datum.)