I need help with a small problem.
I wrote a small program that reads every line of the text inside a .rd file to a string. But inside the text are some \ and when I output the strings the program think that the \ are escape characters.
What can I do to get the original text?
The Program run without an error.
Here is a small snippet of my code:
string find="something";
string replace="something2";
string line="";
fstream myfile;
myfile.open ("file.rb");
if (myfile.is_open())
{
while (getline(myfile,line))
{
cout << line << '\n';
if(line == find)
{
myfile << replace;
}
else
{
myfile << line;
}
}
myfile.close();
}
You should try using a unicode version of getline or you could try adding ios::binary to your stream constructor flags.
See this article for further info.
However, if you read in a string like "\0" from stdin or a file, it should be treated as two separate characters: '\' and '0'. There is no additional processing that you have to do.
Escaping characters is only used for string/character literals. That is to say, when you want to hard-code something into your source code.
Related
I'm fairly new to C++ so please forgive me if my terminology or methodology isn't correct.
I'm trying to write a simple program that:
Opens two input files ("infileicd" and "infilesel").
Opens a single output file "list.txt".
Compares "infilesel" to "infileicd" line by line.
If a line from "infilesel" is found in "infileicd", it writes that line from "infileicd" to "list.txt", effectively making a separate log file.
I am using the getline() function to do this but have run into trouble when trying to compare each file line. I think it might be easier if I could use only the substring of interest to use as a comparison.
The problem is that there are multiple words within the entire getline string and I am only really interested in the second one. Here are two examples:
"1529 nic1_mau_op_mode_3 "8664afm007-01" "1" OUTPUT 1 0 LOGICAL 4 4136"
"1523 pilot_mfd_only_sel "8664afm003-02" "1" OUTPUT 1 0 LOGICAL 4 4112"
"nic1_mau_op_mode_3" and "pilot_mfd_only_sel" are the only substrings of interest.
It would make it a lot easier if I could only use that second substring to compare but I don't know how to extract it specifically from the getline() function. I haven't found anything suggesting it is impossible to do this, but if it is impossible, what would be an alternative method for extracting that substring?
This is a personal project so I'm under no time contstraints.
Any assistance is greatly apprecated in advance. Here is my code (so far):
int main()
{
//Open the file to write the selected variables to.
ofstream writer("list.txt");
//Open the selected variabels file to be read.
ifstream infilesel;
infilesel.open("varsel.txt");
//Open the icd file to be read.
ifstream infileicd;
infileicd.open("aic_fdk_host.txt");
//Check icd file for errors.
if (infileicd.fail()){
cerr << "Error opening icd.\n" << endl;
return 1;
}
else {
cout << "The icd file has been opened.\n";
}
//Check selected variables file for errors.
if (infilesel.fail()){
cerr << "Error opening selection file.\n" << endl;
return 1;
}
else {
cout << "The selection file has been opened.\n";
}
//Read each infile and copy contents of icd file to the list file.
string namesel;
string nameicd;
while(!infileicd.eof()){
getline(infileicd, nameicd);
getline(infilesel, namesel);
if (nameicd != namesel){ //This is where I would like to extract and compare the two specific strings
infileicd; //Skip to next line if not the same
} else {
writer << nameicd << namesel << endl;
}
}
writer.close();
infilesel.close();
infileicd.close();
return 0;
}
So, based on what we discussed in the comments, you just need to toss the stuff you don't want. So try this:
string namesel;
string nameicd;
string junk;
while(!infileicd.eof()){
// Get the first section, which we'll ignore
getline(infileicd, junk, ' ');
getline(infilesel, junk, ' ');
// Get the real data
getline(infileicd, nameicd, ' ');
getline(infilesel, namesel, ' ');
// Get the rest of the line, which we'll ignore
getline(infileicd, junk);
getline(infilesel, junk);
Basically, getline takes a delimiter, which by default is a newline. By setting it as a space the first time, you get rid of the first junk section, using the same method, you get the part you want, and then the final portion goes to the end of the line, also ignoring it.
C++ ifstream get line change getline output from char to string
I got a text file.. so i read it and i do something like
char data[50];
readFile.open(filename.c_str());
while(readFile.good())
{
readFile.getline(data,50,',');
cout << data << endl;
}
My question is instead of creating a char with size 50 by the variable name data, can i get the getline to a string instead something like
string myData;
readFile.getline(myData,',');
My text file is something like this
Line2D, [3,2]
Line3D, [7,2,3]
I tried and the compiler say..
no matching function for getline(std::string&,char)
so is it possible to still break by delimiter, assign value to a string instead of a char.
Updates:
Using
while (std::getline(readFile, line))
{
std::cout << line << std::endl;
}
IT read line by line, but i wanna break the string into several delimiter, originally if using char i will specify the delimiter as the 3rd element which is
readFile.getline(data,50,',');
how do i do with string if i break /explode with delimiter comma , the one above. in line by line
Use std::getline():
std::string line;
while (std::getline(readFile, line, ','))
{
std::cout << line << std::endl;
}
Always check the result of read operations immediately otherwise the code will attempt to process the result of a failed read, as is the case with the posted code.
Though it is possible to specify a different delimiter in getline() it could mistakenly process two invalid lines as a single valid line. Recommend retrieving each line in full and then split the line. A useful utility for splitting lines is boost::split().
I'm running out of hair to pull out, so I thought maybe someone here could help me with this frustration.
I'm trying to read a file line by line, which seems simple enough, using getline(). Problem is, my code seems to keep ignoring the \n, and putting the entire file into one string, which is problematic to say the least.
void MakeRandomLayout(int rows, int cols)
{
string fiveByFive = "cubes25.txt";
string fourByFour = "cubes16.txt";
ifstream infile;
while (true) {
infile.open(fourByFour.c_str());
if (infile.fail()) {
infile.clear();
cout << "No such file found";
} else {
break;
}
}
Vector<string> cubes;
string cube;
while (std::getline(infile, cube)) {
cubes.add(cube);
}
}
Edits: Running OSX 10.7.
The infinite loop for the file is unfinished, will eventually ask for a file.
No luck with extended getline() version, tried that earlier.
Same system for dev and build/run.
The text file i'm reading in looks as follows:
AAEEGN
ABBJOO
ACHOPS
AFFKPS
AOOTTW
CIMOTU
DEILRX
DELRVY
DISTTY
EEGHNW
EEINSU
EHRTVW
EIOSST
ELRTTY
HIMNQU
HLNNRZ
Each string is on a new line in the file. The second one that I'm not reading in is the same but 25 lines instead of 16
Mac software recognizes either '\r' or '\n' as line-endings, for backward compatibility with Mac OS Classic. Make sure that your text editor hasn't put '\r' line endings in your file when your processing code is expecting '\n' (and verify that the '\n' characters you think are in the middle of the string aren't in fact '\r' instead.
I suspect that you are failing to display the contents of Vector correctly. When you dump the Vector, do you print a \n after each entry? You should, because getline discards the newlines on input.
FYI: the typical pattern for reading line-by-line is this:
Vector<string> cubes;
string cube;
while(std::getline(infile, cube)) {
cubes.add(cube);
}
Note that this will discard the newlines, but will put one line per entry in Vector.
EDIT: For whatever it is worth, if you were using an std::vector, you could slurp the file in thusly:
std::ifstream ifile(av[1]);
std::vector<std::string> v(
(std::istream_iterator<std::string>(ifile)),
std::istream_iterator<std::string>());
I am trying to read a file line by line using the code below :
void main()
{
cout << "b";
getGrades("C:\Users\TOUCHMATE\Documents\VS projects\GradeSystem\input.txt");
}
void getGrades(string file){
string buf;
string line;
ifstream in(file);
if (in.fail())
{
cout << "Input file error !!!\n";
return;
}
while(getline(in, line))
{
cout << "read : " << buf << "\n";
}
}
For some reason it keeps returning "input file error!!!". I have tried to full path and relative path (by just using the name of the file as its located in the same folder as the project). what am I doing wrong?
You did not escape the string. Try to change with:
getGrades("C:\\Users\\TOUCHMATE\\Documents\\VS projects\\GradeSystem\\input.txt");
otherwise all the \something are misinterpreted.
As Felice said the '\' is an escape. Thus you need two.
Or you can use the '/' character.
As windows has accepted this as a directory separator for a decade or more now.
getGrades("C:/Users/TOUCHMATE/Documents/VS projects/GradeSystem/input.txt");
This has the advantage that it looks much neater.
first, if you wanna say '\' in a string, you should put '\\', that's the path issue.
then, the string buf is not in connect to your file..
The backslash in C strings is used for escape sequences (e.g. \n is newline, \r carriage return, \t is a tabulation, ...), thus your string is getting garbled because for each backslash+character sequence the compiler is replacing the corresponding escape sequence. To enter backslashes in a C string you have to escape them, using \\:
getGrades("C:\\Users\\TOUCHMATE\\Documents\\VS projects\\GradeSystem\\input.txt");
By the way, it's int main, not void main, and you should return an exit code (usually 0 if everything went fine).
I managed to successfully read the text in a file but it only reads until it hits an empty space, for example the text: "Hi, this is a test", cout's as: "Hi,".
Removing the "," made no difference.
I think I need to add something similar to "inFil.ignore(1000,'\n');" to the following bit of code:
inFil>>text;
inFil.ignore(1000,'\n');
cout<<"The file cointains the following: "<<text<<endl;
I would prefer not to change to getline(inFil, variabel); because that would force me to redo a program that is essentially working.
Thank you for any help, this seems like a very small and easily fixed problem but I cant seem to find a solution.
std::ifstream file("file.txt");
if(!file) throw std::exception("Could not open file.txt for reading!");
std::string line;
//read until the first \n is found, essentially reading line by line unti file ends
while(std::getline(file, line))
{
//do something line by line
std::cout << "Line : " << line << "\n";
}
This will help you read the file. I don't know what you are trying to achieve since your code is not complete but the above code is commonly used to read files in c++.
You've been using formatted extraction to extract a single string, once: this means a single word.
If you want a string containing the entire file contents:
std::fstream fs("/path/to/file");
std::string all_of_the_file(
(std::istreambuf_iterator<char>(filestream)),
std::istreambuf_iterator<char>()
);