I have a strange issue on my Xcode 6. Today I worked at home and when finished a part of C++ code, I committed it on my personal git remote server.
Okay then I came to work, successfully checked it out and then built it. The first build was as usual, it took a few minutes to compile, but other one I made after correcting a code, simply have been done in a few milliseconds, like Xcode took a previously built version and use it this time.
And that was it! I notice I've got the previous functionality, like I use the first version of code, which I checked out after start my work computer.
So the question is - how to force Xcode 6 automatically clean the previous builds before compiling?
P.S. I also noticed that breakpoints changed their color from blue to gray. What have I done wrong here?
Resolved.
Looks like the matter in file's owner permissions. Trying to do sudo chown -R boss:staff /Users/boss/Codes/ made the issue gone.
Related
I have successfully installed the snippet designer (by Mathew Manela) and had successfully exported my own code snippet once from my VS 2017 by following the instruction from this site:
https://marketplace.visualstudio.com/items?itemName=vs-publisher-2795.SnippetDesigner
However, after I closed the VS2017 and come back and attempted to export another code snippet, I can no longer see the option to export code snippet after I highlighted the code and right clicked on it.
I wonder where has the functionality gone?
Also I no longer see the snippet explorer, which according to the link, it is located under view->other window. I did see it before I closed the vs 2017 application.
The snippet I originally created worked and is still working though, which amazes me.
I wonder what have I done incorrectly? How do I export another snippet?
I think I finally figured out what have I done wrong the hard way.
What I did earlier and probably should not have done was downloading the extension from the link above and clicked on it to install. It downloaded and installed like a champ, no complaint. It even worked for 1 time but then vanished in thin air the next time I got into VS2017. There is no way to find it. Maybe I am not supposed to click on the extension to install it outside of VS2017, but there was no warning or error message, which gave user the false impression that everything was fine.
Now, to fix the issue, I went into VS2017, Tools --> Extension And Updates and pick up the SnippetDesigner from there, re-installed it and closed VS2017 for it to finalize.
Then going back into VS 2017 and everything comes back!
Just posted my experience, hopefully someone else does not have to hit their head against the wall trying to figure out why SnippetDesigner is behaving the way I described above.
I'm a beginner in C++ and I started an Udemy course. In that course they recommend using CodeLite as IDE, so I decided to give it a try. In the course, they write a basic program that displays "Hello world!" to show how the IDE works. They compile then execute it, and a terminal window opens with the "Hello world!" message like normal.
In my case, after following the setup process step by step and using the exact same code as them, when I compile and execute the code, my terminal flashes for a split second and then disappears. In their video the terminal remains open but I thought that since they have an older version of CodeLite maybe in the newer one that I have, the terminal is supposed to close by default.
I went online and found people saying that a way of keeping the terminal open is by adding #include and system("pause"); on Windows, but in my case the terminal keeps behaving the same, and CodeLite doesn't report any problems. I've also tried cin.get(); with no success.
Any idea what could be causing this problem?
I had the same problem and I did these steps to solve the problem:
Uninstalled CodeLite.
Installed MinGW correctly.
Then reinstalled CodeLite.
Then did tutorial steps: Click Scan then select MinGW.
After I did these steps, it worked normally.
I had the same problem running Codelite on OpenSuse Leap 15.1. I eventually found a very simple answer. Go to the Settings menu, select Preferences and then Terminal, on the left towards the bottom. Change it to konsole to use the standard terminal, rather than the codelite-terminal.
I know this is an old question, but did not see the answer that worked for me. Debugging (F5) will close the terminal after completion.
However, running/executing (CTRL+F5) will not. Leaves terminal open. At least this is the case for me, and hopefully this helps someone out.
I know this is an old question, but CodeLite has a Project-level setting for "pause when execution ends" which will pause the program before the terminal closes so that you can see outputs and the like.
To turn on just right click on your project, go to settings, and it should be in the center of the general tab.
I went online and found people saying that a way of keeping the terminal open is by adding #include and system("pause");
And this is the wrong way to do it - the desire to leave the window open/closed is not meant to be controlled by your program; but the thing calling it. For example, you break the ability to run it as part of a headless script.
Much better would be to run it in debug and put a break point at the return of main, or to find the configuration option in your IDE that stops it closing the window.
I am not aware why CodeLite would behave like that. If you really added some pause or blocking call and it still closes, it looks like it is not really running the program (e.g. something breaks before that or something is misconfigured).
First, try to open a terminal yourself (e.g. cmd or PowerShell on Windows), and execute your compiled program there -- that way, the terminal will remain open. If that works, then compilation went fine, but something is wrong with CodeLite's configuration, most likely.
Otherwise, as a last resort, since using CodeLite is not strictly required, simply switch to another IDE/toolchain, e.g. Visual Studio (on Windows).
For some reason, after closing and reopening CodeLite, it now works, the terminal remains open when I run it from the IDE. I don't know what solved the problem since I've closed and reopened CodeLite at least 5 times before this without anything happening. Thanks for the help though.
I had the same issue. What I found wrong was that the compiler that I installed was 32bit and I was using the 64bit CodeLite version . Try Installing the 32bit CodeLite version and it should work fine.
It worked for me.
I had this problem also, I tried uninstalling and reinstalling code lite but the problem still occurred.
I went back and checked the Environment Variables in control panel and I had placed the systems variables in "Path" to the incorrect Bin directory.
I corrected the entry, uninstalled and reinstalled code lite again and the problem was resolved.
Hey I also had the same problem, doing the same course! What I did was to relocate my mingw-w64 folder, deleted the earlier path from environment variables and added the new path. I uninstalled CodeLite; not saving the user information. I actually downloaded the 14.0.0(64-bit) instead of the newer version 14.0.1(64 bit) . Then I did the steps that Frank tells you and it worked out for me.
I am completing the same Udemy course and encountered a similar problem of the console closing immediately. I encountered the problem for a workspace with 1.) a long name and 2.) ending with an underscore "_". I reduced the size of the folder name which also involved deleting the trailing underscore. This appears to have solved the problem. I encountered this problem with one of Frank's provided workspaces so I knew it was not a compiler issue.
I had an issue with section 20 of my Udemy course because it had parenthesis in the workspace folder name. "(STL)" at the end. Once I got rid of the special characters, it worked fine.
If pause("system"); or cin or restarting Program and whole PC solutions are not working, then make sure to:
Copy your code.
Create new Project and past your code there.
Make sure the new project is selected before trying to double-click it.
Notes:
You can now delete the old not working project and rename your new project.
I don't know what's the reason of the problem, but I did that and it worked for me.
You need to make sure if it is 64bits CodeLite then you have installed 64bits MinGW. Through the IDE itself, you can re-run the setup wizard
Restarting Codelite worked for me ...
I installed Visual Studio Code 1.1 with the C/C++ extension,
opened my C++ project and tried to use "Go to definition" in vain.
The "Go to definition" is not working at all.
Example, go to definition of a class member:
int i = m_myVar;
(I opened a simpler project with one file and it was working for this one)
In the end, what I want is good indexation of my big project, is there a way to install Intellisense?
I had a the same issue: F12 and Ctrl + Click and Right Click "Go To Definition" wasn't working.
The fix for me was:
Go to Extensions
Click "Disable All Installed Extensions"
Close and Reopen VS Code
Back to Extensions and "Enable All Extensions"
Essentially enable/disable all extensions fixed the issue.
I recently came across this same issue and after trying all of the suggested solutions I could find with no success, I found this article:
https://code.visualstudio.com/docs/setup/linux#_visual-studio-code-is-unable-to-watch-for-file-changes-in-this-large-workspace-error-enospc
Basically my project grew too large and VS code was no longer able to track all files, which messed up the "go to definition" functionality.
After following the steps on the link to increase the maximum number of files to be tracked, the issue was resolved.
The correction is pretty simple (tested on Ubuntu 18.04):
Add this line:
fs.inotify.max_user_watches=524288
to the end of the file /etc/sysctl.conf
After saving, run the following command:
sudo sysctl -p
Hopefully this will be useful to someone else, this has been bothering me for the last few days.
I had a similar problem except with Python and google searches for solutions kept bringing me back to this post so I figured I'd post my solution here in the hopes that it might help other people.
I was working on a remote cluster through VScode Remote and was getting similar errors to the original question(all 'go to ___' functionality was unavailable and was even getting a 'too large to track' error) and I thought I had to increase the number of watches, which didn't end up helping.
All I needed to do was install a python interpreter on the remote VScode server. This fixed my problem.
I believe vscode 1.1 (well, 1.1.1 actually) + the C++ extension (cpptools) is as much Intellisense as we can get for now.
You should load your big project with the "open folder" function to make vscode know about the other files.
https://blogs.msdn.microsoft.com/vcblog/2016/03/31/cc-extension-for-visual-studio-code/ warns about letting the indexing finish first (red icon in lower right corner during indexing) and mentions the current limitations on the source code parsing.
It wasn't working on my laptop as well after installing a few VSCode extensions. I decided to close and re-open VSCode with administrator permission and suddenly it sorted out.
I have been trying to fix this for a long time. In the end, what worked for me was simply reinstalling VSCode, then installing the latest C/C++ extension (v0.18.1). Then, in your .vscode/c_cpp_properties.json file, under includePath, add your include folder which has all your header files.
I tried the methods mentioned in this thread none of them seemed to work for me. A simple solution that worked for me is that I closed the current workspace and created a new workspace, added the folders which I required(same as the old workspace), and saved the new workspace. Waited for a couple of minutes to index and IntelliSense is able to find definitions now.
I am using VSCode 1.52.1 on Ubuntu 20.04.
In my case, for whatever reason,c_cpp_properties.json has become set to Disabled in ~/.config/Code/User/settings.json.
Manually changing it to Enabled solved the problem.
Fixed mine by UNCHECKING C_Cpp > Default > Limit Symbols To Included Headers
Your mileage may vary. Good luck!
Have you saved your workspace? Or did you just open a folder with File->Open Folder? This question already has many answers, but none of them address this case, which was my issue.
The question is not specific enough for me to know if you are having the exact same symptoms as my case.
If:
You have not saved your workspace. vscode doesn't say "(workspace)" at the top of the window.
None of the goto functions are working, but instead report: "No ___ found for ____"
The tag parser database icon in the bottom right is always there but only reports "Parsing open files", rather than telling you how many files have been parsed.
Then:
Try saving your workspace.
If you have multiple versions of a language on your PC, specify the exact language you are using in the VScode(in my case, I am using Python, so I must specify the version to the python Interpreter in VS Code)
If you could not do it whatsoever, then uninstall all the other versions that you don't use and then if you go to VS Code, it will ask the version to be used, and you would have only one version, so when you select the version, the "Go To Definition" will be activated.
I was having a similar issue with java on Ubuntu 20.04 using OpenJDK version 11 (openjdk-11-jdk in apt). At first I didn't have the JRE installed, so I installed it and it still didn't work.
Afterwards, I went to the CTRL + SHIFT + P menu and then to Java: Configure Java Runtime, there I saw in the Java Tooling Runtime tab that /usr/lib/jvm/java-11-openjdk-amd64 was selected, changed it to /usr/lib/jvm/java-1.11.0-openjdk-amd64 just to see if it would work, and after a restart it did. I'm not sure why this is, but I hope it may help somone else.
For python ensure your code analysis settings are correct. In my case the languageServer was accidentally set to 'None'. Reverting it to 'default' or 'pylance' did the trick.
Just to inform if none of above works then
In my case i was using Kite extension in my VS code, I just disabled it and it worked. I think kite extension is blocking this feature.
OS: Linux Ubuntu 22.04
if you encountered with following error:
"The .NET Core SDK cannot be located. .NET Core debugging will not be enabled. Make sure the .NET Core SDK is installed and is on the path."
Normally Vscode remains unable to locate .Net sdk. need to set path manually.
sudo ln -s /snap/dotnet-sdk/current/dotnet /usr/local/bin/dotnet
restart omnisharp & restart vscode
No need to do anything. Just close and re-open. It will work.
I also faced similar problem. In my mac os cmnd + 'click' is used to 'go to definition' then it suddenly stoped working. If that is the case then please follow these steps:
restart vs code
restart pc
uninstall all extensions and reinstall again followed by a pc restart.
I had a similar issue with the extension C/C++ installed. I solved it by downloading an older version of the extension and upgrading to the last version. Somehow it solved the problem...
I am developing a C++ project with Xcode.
My Xcode keeps crashing out of nowhere. It does so often that it is nearly impossible to work at all. I have been using Xcode 6 until now. Since it kept crashing, I just thought I would format everything. I did a clean install of Yosemite and then downloaded Xcode 7 beta 2 from the official Apple Developer page. I installed it on my clean system, then pulled my repo and tried to work. Still the same problem.
Here is the log of the crash:
http://pastebin.com/t4gMWa95
I have looked around SO and many answers suggested that this could be related to source control. However, I tried to disable source control from my settings and still it crashes as often as before.
Anyone can give me an idea on what is going on? This is frustrating...!
Hmm the crash is in clang::DiagnosticRenderer::emitDiagnostic which presumably is redering errors and warnings. Could there be something odd about your warnings? Or something that is echoed in warnings classnames, scource file names, paths to source files? Does it happen when there is so little code as to have no or few diagnostics? But first - make a new XCode project and add your source to that, see if the new one works better.
Go to Users>[UserName]>Library>Preferences
Search for "xcode" inside the "Preferences" folder
Move all the resulting files (I had 6 files when I searched) to Desktop
Restart your Mac
Now open Xcode and see if its crashing
These steps solved my problem. Hope this helps...
I'm having a quite big C++ project in Netbeans. It takes about 3 minutes for it to compile (with -j5 mode enabled).
I'm using my VM server (FreeBSD) hosted on Windows 8 and using SFTP option to compile.
Everything is working like a charm except that it looks like Netbeans is always making clean while compiling (no clean messages appearing in the output console though!). It's really annoying for me to wait 3 minutes for each change I have to make in my source code.
My friend had a similar issue some time ago - it was related to the Netbeans timestamps files (different time setting on the local & remote VM machine). In my case the VM machine time setting is the same as on my PC.
I am currently running Netbeans version 7.3.1 (because later & latest version are having some odd SFTP issue not working correctly). I've also tried the latest beta build including earlier versions and it doesn't seem to solve my problem.
Whats the problem? I will appreciate every solution.
There is excellent article "Make Dependency Checking" on this topic by NetBeans team which is worth reading to understand this behaviour.
NetBeans internally uses make utility for dependency checking defined in Makefile. When we create a new project in NetBeans, it enables "Full rebuild" feature. This leads to this particular behaviour.
However if want to avoid this, we can change this particular feature to "Incremental rebuild".
For complete information and to understand its consequences, please refer the above article from NetBeans team.