I have a php application calling the Graph API. It's been working for almost a year and stopped working today with the following error:
Fatal error: Uncaught OAuthException: This IP can't make requests for that application. thrown in /mnt/var/vcap.local/dea/apps/nn-6-38e7eee3a80186c674057d8c08ede661/app/vendor/facebook/php-sdk/src/base_facebook.php on line 1133
The server is through appfog and the hostname is: nn.aws.af.cm
I've looked through posts suggesting that I add the IP to a whitelist. This did not solve the problem. (54.236.159.122)
I'd appreciate it if someone could provide the correct answer. Thanks in advance for your time.
Related
I am having a recurring issue with shinyproxy (currently 2.5.0 - based on Springboot) hosted within a kubernetes cluster (currenty a single node). I'm using Auth0 with SAML. Traffic goes through a Nginx ingress controller that does TLS termination and has a fairly basic configuration. What I don't understand is that I will get the following error, but only once in a while. If I try to login, I will get the error, but then after that, if I go back to the login page and try to log in again, everything works fine.
o.s.security.saml.log.SAMLDefaultLogger : AuthNResponse;FAILURE;[Auth0 URN];;;org.opensaml.common.SAMLException: InResponseToField of the Response doesn't correspond to sent message a12g399012cidi7i2i3ha3ha4h6e6jc
at org.springframework.security.saml.websso.WebSSOProfileConsumerImpl.processAuthenticationResponse(WebSSOProfileConsumerImpl.java:175)
at org.springframework.security.saml.SAMLAuthenticationProvider.authenticate(SAMLAuthenticationProvider.java:88)
at org.springframework.security.authentication.ProviderManager.authenticate(ProviderManager.java:199)
at org.springframework.security.authentication.ProviderManager.authenticate(ProviderManager.java:219)
...
This made me think of a cookies problem, however adjusting the shinyproxy server/proxy configuration for cookies did not change anything. Shinyproxy configuration has:
server:
secure-cookies: true
proxy:
same-site-cookie: None
In the browser when I try to log in I get the following error message:
Error
Status code: 200
Message: Error validating SAML message
Stack Trace:
org.springframework.security.authentication.AuthenticationServiceException: Error validating SAML message
...
Anyone has an idea of what I am missing? I would really appreciate it! Thank you!
I've followed closely this tutorial which is great.
Everything worked fine until today, where when I log with github I get this error:
HTTPError at /oauth/complete/github/
403 Client Error: Forbidden for url: https://github.com/login/oauth/access_token
What am I missing / what could I have changed?
I'm currently developping a Website with social networks login.
Everything works fine (google, facebook and twitter) but not github: after some attempts, I'm getting now a 403.
The problem in Django is that 403 errors dont show the HTML content that come with the error!
I had to run in Debug mode and add a breakpoint in the file
/usr/local/lib/python3.7/site-packages/requests/models.py
line 940 / where there's the code raise HTTPError(http_error_msg, response=self)
Inspecting the variable self.content.decode("utf-8") showed me that I've been restricted (for no logical reason - what's more strange is that the same code, on my same PC but under Windows, works like a charm).
I'm hoping the technical team at github will explain what went wrong...
How do I get a registration code or otherwise solve this problem?
While writing this question, I realized the crux of this problem is the bottom-most part of this question: I'm not getting the popup I'm supposed to get and when I enter the URL in a browser it says invalid registration code.
I'm attempting to develop an Alexa Voice Service application. Website/companion service only. I have gone through the Reference Implementation Guide twice and have double checked that all of the setup has been done correctly.
This is the server error I get: invalid registration code. I never did anything with a registration code and can't seem to find anything about a registration code (relevant to Alexa) anywhere after googling quite a bit.
Listening on port 3000
error: { [InvalidRegistrationCode: The provided registration code was invalid.]
name: 'InvalidRegistrationCode',
message: 'The provided registration code was invalid.',
status: 401 }
Error: Can't set headers after they are sent.
Here's the client output:
vlcj: (DefaultMediaPlayer.java:183)
addMediaPlayerEventListener(listener=com.amazon.alexa.avs.AVSAudioPlayer$1#4b3a4950)
There was a problem connecting to the Companion Service. Trying again in 2 seconds. Please make sure it is up and running.
[DEBUG] joining on thread Thread[Timer-0,5,com.amazon.alexa.avs.AVSApp]
There was a problem connecting to the Companion Service.
Trying again in 2 seconds. Please make sure it is up and running.
The AVS launcher opens too, and when I record something and send it I get:
com.amazon.alexa.avs.AVSException: 403 Invalid Access Token
The instructions mention (at the very bottom of the reference guide) that I need to:
Please register your device by visiting the following website on any system and following the instructions: https://localhost:3000/provision/************** That URL is supposed to pop something up once the companion service but that hasn't happened.
Any thoughts on how can I fix this?
I was following a good document Project: Raspberry Pi + Alexa Voice Service at https://github.com/amzn/alexa-avs-raspberry-pi . It describes all steps very well.
Please take a look at the following steps:
3 - Getting started with Alexa Voice Service
3.1 Register for a free Amazon Developer Account
3.4 Register your product and create a security profile.
6 - Enable Security Profile
This thread on the Amazon developer forums seems related: http://forums.developer.amazon.com/forums/thread.jspa?threadID=11327&tstart=0
Quoted response:
There are a number of potential issues causing that error.
You might be sending an invalid scope. Are you sending "alexa:all" as
the scope? Or, your security profile might not be correctly linked. Is
it selected in the dropdown on the developer portal?
Are you getting an access token from the companion service, or is the
text box blank? If you're not getting an access token, check that your
device serial number matches between the companion service and the
java client. If you're getting an access token, the problem is more
likely with your security profile.
You should also look at these threads to see if they're helpful...
(links removed due to reputation requirement)
If that doesn't help, you'll probably have more luck asking the AVS team directly on their forum site.
I have installed new site in Joomla 2.5 and it was working fine at first,(front end and back end),
but today when I wanted to do some changes in the back end, after I log in to the site, It shows this error:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator to inform of the time the error occurred and of anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
I read some questions that were like my problem,
I made some changes in configuration.php file as below:
$log_path='./logs';
$tmp_path = './tmp';
but it did not work.
Please help me:)
I am trying a GET request from Facebook for a batch of ids using my app access token separated by a comma.
Please find below the call:
https://graph.facebook.com/?ids=1374186930,100005305471358,1516423103,100003031846875,100002939786624,100004705179654,522691095,100002893804783,100005269178084,1417831236,100004652521769,100003511989378,100002394692546,1646211152,1092931510,100000152985362,100004151552444,100004122698187,100001574061632,100005007584068&access_token=<my_app_access_token>&format=json
Facebook returns an error intermittently for some of these requests with an HTTP status code of 502.
I've tried fetching for these ids using the graph API explorer as well as the app access token later. They have been fetched properly. I have performed some research, but all issues of Facebook were related to open graph and 502 is "Bad Gateway Error". Since mine is not a web app, I cannot even refresh a browser to make the call again. This is a normal call made to Facebook API.
The error returned by Facebook is html which contains the following message:
"Sorry, something went wrong. We're working on getting this fixed as soon as we can."
Since they have given this response, I want to know if someone is facing this issue as well and if somebody could tell me, when this will be resolved.
This is affecting the other calls as well and there is a delay in the fetching.
Thanks in advance.
The Error 502 means that the message is too large. I do not know exactly the maximum size. Curiosity. What language are you using??
Good Bye