Are there any good examples on how to create a WebM video file suitable for streaming to a web browser using the open-source WebM encoding library? Where should I begin? I am the owner of a small business, so I don't want to get into legal issues with FFMpeg, and I can't seem to figure out how the vpx_encoder.h is supposed to work. I am also interested in performing the reverse to create a video player in my application. I realize my question is similar to this one, however, I found neither of the two answers satisfactory.
To be more specific; the images are coming from a GDI+ bitmap object.
Take a look at my code, I used DEVIL to handle image file and manually convert pixels from RGB to YV12.
http://code.google.com/p/ortholab/source/browse/WebMEnc/WebMEnc.cpp
Related
I want to develop a slide-show kind of app that could be casted to smart TV, similar to showing a PowerPoint slide show. Standard Miracast solution via the Connect app does not work nicely since the phone resolution does not match the high resolution of the TV; not to count the fact that there is no way to hide the navigation bar with TryEnterFullscreenAsync. The images could be quickly rendered from vector sources. So my question is whether there is a way to generate MP4 on the fly.
As long as you can gerate the bitmaps on the fly, as you mentioned, then you can use FFmpeg to create the MP4.
Download ffmpeg source code and check the source of doc/examples/muxing.c
This example is pretty much doing this. Just replace the fill_yuv_image() by the actual thing you are rendering.
Don't forget to convert your pictures to YUV format. In this example, the encoder will need a YUV bitmap and you will probably render an RGB image. Google for swscale or even check the other examples from FFmpeg in order to solve this problem.
--
If you really want something Microsoft specific, then you must use the "Microsoft Media Foundation". There's a lot of samples here on how to encode and decode:
https://msdn.microsoft.com/en-us/library/windows/desktop/aa371827(v=vs.85).aspx
And you can use all these codecs:
https://msdn.microsoft.com/en-us/library/windows/desktop/ff819077(v=vs.85).aspx
Given that FFmpeg is the leading multimedia framework and most of the video/audio players uses it, I'm wondering somethings about audio/video players using FFmpeg as intermediate.
I'm studying and I want to know how audio/video players works and I have some questions.
I was reading the ffplay source code and I saw that ffplay handles the subtitle stream. I tried to use a mkv file with a subtitle on it and doesn't work. I tried using arguments such as -sst but nothing happened. - I was reading about subtitles and how video files uses it (or may I say containers?). I saw that there's two ways putting a subtitle: hardsubs and softsubs - roughly speaking hardsubs mode is burned and becomes part of the video, and softsubs turns a stream of subtitles (I might be wrong - please, correct me).
The question is: How does they handle this? I mean, when the subtitle is part of the video there's nothing to do, the video stream itself shows the subtitle, but what about the softsubs? how are they handled? (I heard something about text subs as well). - How does the subtitle appears on the screen and can be configured changing fonts, size, colors, without encoding everything again?
I was studying some video players source codes and some or most of them uses OpenGL as renderer of the frame and others uses (such as Qt's QWidget) (kind of or for sure) canvas. - What is the most used and which one is fastest and better? OpenGL with shaders and stuffs? Handling YUV or RGB and so on? How does that work?
It might be a dump question but what is the format that AVFrame returns? For example, when we want to save frames as images first we need the frame and then we convert, from which format we are converting from? Does it change according with the video codec or it's always the same?
Most of the videos I've been trying to handle is using YUV720P, I tried to save the frames as png and I need to convert to RGB first. I did a test with the players and I put at the same frame and I took also screenshots and compared. The video players shows the frames more colorful. I tried the same with ffplay that uses SDL (OpenGL) and the colors (quality) of the frames seems to be really low. What might be? What they do? Is it shaders (or a kind of magic? haha).
Well, I think that is it for now. I hope you help me with that.
If this isn't the correct place, please let me know where. I haven't found another place in Stack Exchange communities.
There are a lot of question in one post:
How are 'soft subtitles' handled
The same way as any other stream :
read packets from a stream to the container
Give the packet to a decoder
Use the decoded frame as you wish. Here with most containers supporting subtitles the presentation time will be present. All you need at this time is get the text and burn it onto the image at the same presentation time. There are a lot of ways to print the text on the video, with ffmpeg or another library
What is the most used renderer and which one is fastest and better?
most used depend on the underlying system. For instance Qt only wrap native renderers, and even has a openGL version
You can only be as fast as the underlying system allows. Does it support ouble-buffering? Can it render in your decoded pixel format or do you have to perform color conversion before? This topic is too broad
Better only depend on the use case. this is too broad
what is the format that AVFrame returns?
It is a raw format (enum AVPixelFormat), and depends on the codec. There is a list of YUV and RGB FOURCCs which cover most formats in ffmpeg. Programmatically you can access the table AVCodec::pix_fmts to obtain the pixel format a specific codec support.
I am looking for a fast way to load in a video file and to create images from them at certain intervals ( every second, every minute, every hour, etc.).
I tried using DirectShow, but it just ran too slow for me to start the video file and move to a certain location to get data and to save it out to an image. Even if I disabled the reference clock. Tried OpenCV, but it has trouble opening the AVI file unless I know the exact codec information. So if I know a way to get the codec information out from OpenCV I may give it another shot. I tried to use FFMPEG, but I don't have as much control over it as well as I would wish.
Any advice would be greatly appreciated. This is being developed on a Windows box since it has to be hosted on a Windows box.
MPEG-4 format is not an intra-coded format, so you can't just jump to a random frame and decode it on its own, as most frames only encode the differences from one or more other frames. I suspect your decoding is slow because when you land on a frame for which several other dependent frames to be decoded first.
One way to improve performance would be to determine which frames are keyframes (or sometimes also called 'sync' points) and limit your decoding to those frames, since these can be decoded on their own.
I'm not very familiar with DirectShow capabilities, but I would expect it has some API to expose sync points.
Also, I should mention that the QuickTime SDK on Windows is possibly another good option that you have for decoding frames from movies. You should first test that your AVI movies are played correctly in the QuickTime Player. And the QT SDK does expose sync points, see the section Finding Interesting Times in the QT SDK documentation.
ffmpeg's libavformat might work for ya...
I want to read in an .avi video file for a program that I am making. I have the file location saved as a string. Is there any good tutorials on using .avi files in c++ or does anyone know who to read one in? Is it the same as normal files?
I have a previously asked SO question that goes into better detail but here is what I want to do:
I am making a program that will detect faces (though OpenCV) As of now I have been given a video processor program that will detect each face on a frame, and return the frame as a image and the CvRec of the faces. I want to take these faces and test them to validate that they are all actually faces.
After I have all the faces (tested) I want to then take the images and test them together. I test the faces on each frame for size and distance changes. If the faces pass this for a frame length of two seconds, then I want to crop the face and make it the subject of each frame.
After each frame is cropped I then want to save the new video file for the user.
Hopefully that helps. If anyone needs a better explanation please let me know.
First of all, a little background.
What is AVI?
AVI stands for Audio Video Interleave. It is a special case of the RIFF (Resource Interchange File Format). AVI is defined by Microsoft and it is the most common format for audio/video data.
I assume you would want to read a avi file and decode the compressed video frames. AVI file is just like any other normal file and you can use fread()(in C) or iostream(in C++) to open an avi file and read it contents. But the contents of an avi file are video frames in a compressed format. The compression allows video content of bigger sizes to be efficiently packed in less memory space.To make any sense of this compressed data you would have to decode the encoded data format.You will have to study the standard which describes how AVI encoding is done and then extract and decode the frames. this raw video data now when fed to a video device will be displayed in video format.
It seems you are staying within OpenCV so things are easy. If OpenCV is compiled properly it is capable of delegating io/coding/decoding to other libraries. Quicktime and others for example, but best is to use ffmpeg. You open, read and decode everything using the OpenCV API which gives you the video frame by frame.
Make sure your OpenCV is compiled with ffmpeg support and then read the OpenCV tutorial on how to read/write AVI files. It's really easy.
Getting OpenCV to be built with ffmpeg support might be hard though. You might want to switch to an older version of OpenCV if you can't get ffmpeg running with the current one.
Personally i would not spent time trying to read the video by yourself and delegate the task to OpenCV. That's how it is supposed to be used.
I'm currently doing my Multimedia assignment where I have to create a new video using one video as a foreground and another as a background. OpenCV allows me to do just that: extracting images from each frame in video, processing them and putting the results back into a video format. However, OpenCV is only a computer vision library. Is there a library that allows me to do the same for sound? I'd like to extract sound (music, actually) from a video I'm using and put it into the final video.
You can use libavcodec library used in FFmpeg.
Try Tuna Audio Extracter (http://github.com/tuna74/TunaAudioExtracter). You can use the extracter part from that program.