I'm trying to start a work in vscode , latest C++ plugin version supports ms debugger, so as I'm mostly working under windows it was a signal to try this.
c++ tools plugin from MS and cmake tools were installed.
my test project was however not built . the problem is clear , but I need an advice from experienced vscode users how to solve this right.
cmake doesn't see vc compiler.
(after using QtCreator) I expected that vscode could detect vc installation... however that's not so. ok, I have a two ways:
fill environment variables INCLUDE/LIB/PATH with a headers, libs and binaries
just run vcvarsall.bat x64
Second way is a simple and reliable. so final question is:
how to run .bat at the begining of vscode start?
(I don't mean write another bat/cmd, prepare the environment and run vscode inside the same script after that)
Although the question is fairly old, I'll try to give a useful answer, in case others stumble across, just like I did.
I believe what you are trying to achieve is not possible. Code inherits the environment it was started with. If you did not launch it from a developer command prompt, you will not be able build and debug. (Building might be possible if every task first starts the vcvarsall.bat, but that slows things down by a lot. Debugging I think will still not work.)
If you are willing to, you can check out vector-of-bools CMake Tools extension which does build automation as well as automatic MSVC detection. It builds using CMake (thus you need to write your build scripts using CMake), but it will take care of building just by pressing F7, like what most VS users are familiar with.
I installed Visual Studio Code 1.1 with the C/C++ extension,
opened my C++ project and tried to use "Go to definition" in vain.
The "Go to definition" is not working at all.
Example, go to definition of a class member:
int i = m_myVar;
(I opened a simpler project with one file and it was working for this one)
In the end, what I want is good indexation of my big project, is there a way to install Intellisense?
I had a the same issue: F12 and Ctrl + Click and Right Click "Go To Definition" wasn't working.
The fix for me was:
Go to Extensions
Click "Disable All Installed Extensions"
Close and Reopen VS Code
Back to Extensions and "Enable All Extensions"
Essentially enable/disable all extensions fixed the issue.
I recently came across this same issue and after trying all of the suggested solutions I could find with no success, I found this article:
https://code.visualstudio.com/docs/setup/linux#_visual-studio-code-is-unable-to-watch-for-file-changes-in-this-large-workspace-error-enospc
Basically my project grew too large and VS code was no longer able to track all files, which messed up the "go to definition" functionality.
After following the steps on the link to increase the maximum number of files to be tracked, the issue was resolved.
The correction is pretty simple (tested on Ubuntu 18.04):
Add this line:
fs.inotify.max_user_watches=524288
to the end of the file /etc/sysctl.conf
After saving, run the following command:
sudo sysctl -p
Hopefully this will be useful to someone else, this has been bothering me for the last few days.
I had a similar problem except with Python and google searches for solutions kept bringing me back to this post so I figured I'd post my solution here in the hopes that it might help other people.
I was working on a remote cluster through VScode Remote and was getting similar errors to the original question(all 'go to ___' functionality was unavailable and was even getting a 'too large to track' error) and I thought I had to increase the number of watches, which didn't end up helping.
All I needed to do was install a python interpreter on the remote VScode server. This fixed my problem.
I believe vscode 1.1 (well, 1.1.1 actually) + the C++ extension (cpptools) is as much Intellisense as we can get for now.
You should load your big project with the "open folder" function to make vscode know about the other files.
https://blogs.msdn.microsoft.com/vcblog/2016/03/31/cc-extension-for-visual-studio-code/ warns about letting the indexing finish first (red icon in lower right corner during indexing) and mentions the current limitations on the source code parsing.
It wasn't working on my laptop as well after installing a few VSCode extensions. I decided to close and re-open VSCode with administrator permission and suddenly it sorted out.
I have been trying to fix this for a long time. In the end, what worked for me was simply reinstalling VSCode, then installing the latest C/C++ extension (v0.18.1). Then, in your .vscode/c_cpp_properties.json file, under includePath, add your include folder which has all your header files.
I tried the methods mentioned in this thread none of them seemed to work for me. A simple solution that worked for me is that I closed the current workspace and created a new workspace, added the folders which I required(same as the old workspace), and saved the new workspace. Waited for a couple of minutes to index and IntelliSense is able to find definitions now.
I am using VSCode 1.52.1 on Ubuntu 20.04.
In my case, for whatever reason,c_cpp_properties.json has become set to Disabled in ~/.config/Code/User/settings.json.
Manually changing it to Enabled solved the problem.
Fixed mine by UNCHECKING C_Cpp > Default > Limit Symbols To Included Headers
Your mileage may vary. Good luck!
Have you saved your workspace? Or did you just open a folder with File->Open Folder? This question already has many answers, but none of them address this case, which was my issue.
The question is not specific enough for me to know if you are having the exact same symptoms as my case.
If:
You have not saved your workspace. vscode doesn't say "(workspace)" at the top of the window.
None of the goto functions are working, but instead report: "No ___ found for ____"
The tag parser database icon in the bottom right is always there but only reports "Parsing open files", rather than telling you how many files have been parsed.
Then:
Try saving your workspace.
If you have multiple versions of a language on your PC, specify the exact language you are using in the VScode(in my case, I am using Python, so I must specify the version to the python Interpreter in VS Code)
If you could not do it whatsoever, then uninstall all the other versions that you don't use and then if you go to VS Code, it will ask the version to be used, and you would have only one version, so when you select the version, the "Go To Definition" will be activated.
I was having a similar issue with java on Ubuntu 20.04 using OpenJDK version 11 (openjdk-11-jdk in apt). At first I didn't have the JRE installed, so I installed it and it still didn't work.
Afterwards, I went to the CTRL + SHIFT + P menu and then to Java: Configure Java Runtime, there I saw in the Java Tooling Runtime tab that /usr/lib/jvm/java-11-openjdk-amd64 was selected, changed it to /usr/lib/jvm/java-1.11.0-openjdk-amd64 just to see if it would work, and after a restart it did. I'm not sure why this is, but I hope it may help somone else.
For python ensure your code analysis settings are correct. In my case the languageServer was accidentally set to 'None'. Reverting it to 'default' or 'pylance' did the trick.
Just to inform if none of above works then
In my case i was using Kite extension in my VS code, I just disabled it and it worked. I think kite extension is blocking this feature.
OS: Linux Ubuntu 22.04
if you encountered with following error:
"The .NET Core SDK cannot be located. .NET Core debugging will not be enabled. Make sure the .NET Core SDK is installed and is on the path."
Normally Vscode remains unable to locate .Net sdk. need to set path manually.
sudo ln -s /snap/dotnet-sdk/current/dotnet /usr/local/bin/dotnet
restart omnisharp & restart vscode
No need to do anything. Just close and re-open. It will work.
I also faced similar problem. In my mac os cmnd + 'click' is used to 'go to definition' then it suddenly stoped working. If that is the case then please follow these steps:
restart vs code
restart pc
uninstall all extensions and reinstall again followed by a pc restart.
I had a similar issue with the extension C/C++ installed. I solved it by downloading an older version of the extension and upgrading to the last version. Somehow it solved the problem...
I'm successfully cross compiling C++ code to run on a raspberyy pi from a Windows 7 machine through Eclipse Kepler SR1. Although the compilation is successful, there is a problem with the error parsing on the editor. It's showing red lines (errors) for functions/definitions such as cout, endl, string, etc.
When I click on Project->C/C++ Index->Search for Unresolved Includes I can see that it complains that bits/c++config.h, bits/c++allocator.h and similar files are unresolved. So, I did a grep and found these and included the director under Project Properties->C/C++ Build->Settings->Tool Settings->Cygwin C/C++ Compiler->Includes and Eclipse just crashes. I noticed that it generates the attached log file. This seems like a nasty bug or a huge error on my part. Is there a way to resolve this issue?
Here is the error log file.
This answer not pretend to be a solution. Just a set of thoughts
There are many-many bugs in CDT. Try latest development versions in hope that someone fixed your issue.
Update sites (to install/update via "Help"->"Install new software"->"Add..." dialog):
http://download.eclipse.org/tools/cdt/builds/luna/milestones (for Luna milestones)
http://download.eclipse.org/tools/cdt/builds/8.4/nightly (for 8.4 nighlies )
Or download directly from CDT page.
You can also check their Bugzilla and forums if there are bug report for that issue and solutions/workarounds. And surely you can check out CDT source code and actively participate in bug fix ;)
Personally, I use latest milestones, because of indexer: 8.4 better understands C++11.
Hope it helps.
I have a fairly large fortran90 project in Photran. I find that sometimes the editor just hangs or is very slow. Saving a file or using ctrl+/ for commenting lines seems to trigger this slowness. Any solutions to this?
I do have refactoring turned on as I find it useful to navigate, turning that off seems to help some. Any other solutions?
I am using eclipse-Galileo, photran 5.0 on linux OS. I have jdk 6 as my java environment. Will updating to Helios and a later photran make a difference? Is it easy to update to Helios?
Edit: Just checked TOP, the cpu is working at 100% when I am trying to save a file! And I even have the refactoring turned off.
Here is the answer to this question from the photran mailing list...
http://dev.eclipse.org/mhonarc/lists/photran/msg01691.html
See the rest of the thread for more information.
The only solution for now seems to be to turn off refactoring.
I was able to reproduce the issues with Photran refactoring on and off when using the same workspace with different Eclipse versions. I think you have to remove your ~/.eclipse and ~/workspace/.metadata directories and have a fresh start. I have been using the latest Eclipse (Kepler) with Photran refactoring on/off without any issue.
I just installed eclipse-cdt 3.2.2 on Linux (Mint). The content assist feature which pops up when you do a "." or "->" on a struct or struct pointer, is extremely slow and freezes the entire IDE for around 10-20 seconds.
This I feel, is because it searches through the entire include directory /usr/include that comes by default for any C project that you create.
How can this issue be solved?
Thanks..
You have bug 196203 which points to this page with some settings to perform.
It includes:
how to make Eclipse actually use Sun's Java solving the "Eclipse is horribly slow" problem caused by bug 45347.
raising the default heap size.