I installed Visual Studio Code 1.1 with the C/C++ extension,
opened my C++ project and tried to use "Go to definition" in vain.
The "Go to definition" is not working at all.
Example, go to definition of a class member:
int i = m_myVar;
(I opened a simpler project with one file and it was working for this one)
In the end, what I want is good indexation of my big project, is there a way to install Intellisense?
I had a the same issue: F12 and Ctrl + Click and Right Click "Go To Definition" wasn't working.
The fix for me was:
Go to Extensions
Click "Disable All Installed Extensions"
Close and Reopen VS Code
Back to Extensions and "Enable All Extensions"
Essentially enable/disable all extensions fixed the issue.
I recently came across this same issue and after trying all of the suggested solutions I could find with no success, I found this article:
https://code.visualstudio.com/docs/setup/linux#_visual-studio-code-is-unable-to-watch-for-file-changes-in-this-large-workspace-error-enospc
Basically my project grew too large and VS code was no longer able to track all files, which messed up the "go to definition" functionality.
After following the steps on the link to increase the maximum number of files to be tracked, the issue was resolved.
The correction is pretty simple (tested on Ubuntu 18.04):
Add this line:
fs.inotify.max_user_watches=524288
to the end of the file /etc/sysctl.conf
After saving, run the following command:
sudo sysctl -p
Hopefully this will be useful to someone else, this has been bothering me for the last few days.
I had a similar problem except with Python and google searches for solutions kept bringing me back to this post so I figured I'd post my solution here in the hopes that it might help other people.
I was working on a remote cluster through VScode Remote and was getting similar errors to the original question(all 'go to ___' functionality was unavailable and was even getting a 'too large to track' error) and I thought I had to increase the number of watches, which didn't end up helping.
All I needed to do was install a python interpreter on the remote VScode server. This fixed my problem.
I believe vscode 1.1 (well, 1.1.1 actually) + the C++ extension (cpptools) is as much Intellisense as we can get for now.
You should load your big project with the "open folder" function to make vscode know about the other files.
https://blogs.msdn.microsoft.com/vcblog/2016/03/31/cc-extension-for-visual-studio-code/ warns about letting the indexing finish first (red icon in lower right corner during indexing) and mentions the current limitations on the source code parsing.
It wasn't working on my laptop as well after installing a few VSCode extensions. I decided to close and re-open VSCode with administrator permission and suddenly it sorted out.
I have been trying to fix this for a long time. In the end, what worked for me was simply reinstalling VSCode, then installing the latest C/C++ extension (v0.18.1). Then, in your .vscode/c_cpp_properties.json file, under includePath, add your include folder which has all your header files.
I tried the methods mentioned in this thread none of them seemed to work for me. A simple solution that worked for me is that I closed the current workspace and created a new workspace, added the folders which I required(same as the old workspace), and saved the new workspace. Waited for a couple of minutes to index and IntelliSense is able to find definitions now.
I am using VSCode 1.52.1 on Ubuntu 20.04.
In my case, for whatever reason,c_cpp_properties.json has become set to Disabled in ~/.config/Code/User/settings.json.
Manually changing it to Enabled solved the problem.
Fixed mine by UNCHECKING C_Cpp > Default > Limit Symbols To Included Headers
Your mileage may vary. Good luck!
Have you saved your workspace? Or did you just open a folder with File->Open Folder? This question already has many answers, but none of them address this case, which was my issue.
The question is not specific enough for me to know if you are having the exact same symptoms as my case.
If:
You have not saved your workspace. vscode doesn't say "(workspace)" at the top of the window.
None of the goto functions are working, but instead report: "No ___ found for ____"
The tag parser database icon in the bottom right is always there but only reports "Parsing open files", rather than telling you how many files have been parsed.
Then:
Try saving your workspace.
If you have multiple versions of a language on your PC, specify the exact language you are using in the VScode(in my case, I am using Python, so I must specify the version to the python Interpreter in VS Code)
If you could not do it whatsoever, then uninstall all the other versions that you don't use and then if you go to VS Code, it will ask the version to be used, and you would have only one version, so when you select the version, the "Go To Definition" will be activated.
I was having a similar issue with java on Ubuntu 20.04 using OpenJDK version 11 (openjdk-11-jdk in apt). At first I didn't have the JRE installed, so I installed it and it still didn't work.
Afterwards, I went to the CTRL + SHIFT + P menu and then to Java: Configure Java Runtime, there I saw in the Java Tooling Runtime tab that /usr/lib/jvm/java-11-openjdk-amd64 was selected, changed it to /usr/lib/jvm/java-1.11.0-openjdk-amd64 just to see if it would work, and after a restart it did. I'm not sure why this is, but I hope it may help somone else.
For python ensure your code analysis settings are correct. In my case the languageServer was accidentally set to 'None'. Reverting it to 'default' or 'pylance' did the trick.
Just to inform if none of above works then
In my case i was using Kite extension in my VS code, I just disabled it and it worked. I think kite extension is blocking this feature.
OS: Linux Ubuntu 22.04
if you encountered with following error:
"The .NET Core SDK cannot be located. .NET Core debugging will not be enabled. Make sure the .NET Core SDK is installed and is on the path."
Normally Vscode remains unable to locate .Net sdk. need to set path manually.
sudo ln -s /snap/dotnet-sdk/current/dotnet /usr/local/bin/dotnet
restart omnisharp & restart vscode
No need to do anything. Just close and re-open. It will work.
I also faced similar problem. In my mac os cmnd + 'click' is used to 'go to definition' then it suddenly stoped working. If that is the case then please follow these steps:
restart vs code
restart pc
uninstall all extensions and reinstall again followed by a pc restart.
I had a similar issue with the extension C/C++ installed. I solved it by downloading an older version of the extension and upgrading to the last version. Somehow it solved the problem...
I am developing a C++ project with Xcode.
My Xcode keeps crashing out of nowhere. It does so often that it is nearly impossible to work at all. I have been using Xcode 6 until now. Since it kept crashing, I just thought I would format everything. I did a clean install of Yosemite and then downloaded Xcode 7 beta 2 from the official Apple Developer page. I installed it on my clean system, then pulled my repo and tried to work. Still the same problem.
Here is the log of the crash:
http://pastebin.com/t4gMWa95
I have looked around SO and many answers suggested that this could be related to source control. However, I tried to disable source control from my settings and still it crashes as often as before.
Anyone can give me an idea on what is going on? This is frustrating...!
Hmm the crash is in clang::DiagnosticRenderer::emitDiagnostic which presumably is redering errors and warnings. Could there be something odd about your warnings? Or something that is echoed in warnings classnames, scource file names, paths to source files? Does it happen when there is so little code as to have no or few diagnostics? But first - make a new XCode project and add your source to that, see if the new one works better.
Go to Users>[UserName]>Library>Preferences
Search for "xcode" inside the "Preferences" folder
Move all the resulting files (I had 6 files when I searched) to Desktop
Restart your Mac
Now open Xcode and see if its crashing
These steps solved my problem. Hope this helps...
I'm having a quite big C++ project in Netbeans. It takes about 3 minutes for it to compile (with -j5 mode enabled).
I'm using my VM server (FreeBSD) hosted on Windows 8 and using SFTP option to compile.
Everything is working like a charm except that it looks like Netbeans is always making clean while compiling (no clean messages appearing in the output console though!). It's really annoying for me to wait 3 minutes for each change I have to make in my source code.
My friend had a similar issue some time ago - it was related to the Netbeans timestamps files (different time setting on the local & remote VM machine). In my case the VM machine time setting is the same as on my PC.
I am currently running Netbeans version 7.3.1 (because later & latest version are having some odd SFTP issue not working correctly). I've also tried the latest beta build including earlier versions and it doesn't seem to solve my problem.
Whats the problem? I will appreciate every solution.
There is excellent article "Make Dependency Checking" on this topic by NetBeans team which is worth reading to understand this behaviour.
NetBeans internally uses make utility for dependency checking defined in Makefile. When we create a new project in NetBeans, it enables "Full rebuild" feature. This leads to this particular behaviour.
However if want to avoid this, we can change this particular feature to "Incremental rebuild".
For complete information and to understand its consequences, please refer the above article from NetBeans team.
What the title says. All options in the "Build" tab are grayed out, and run and debug are grayed out in the "Run" tab. I can fix it by giving mono root, but I'm not too keen on having that as a permanent solution.
I have tried creating a new "Hello world" solution just for testing, tried different project file formats(vs 20xx, mono 1.0), reinstalling mono, installing/uninstalling monodevelop-debugger-gdb...
I've been able to run programs before, no idea what happened.
Using linux mint 12 and monodevelop 2.6
Any other info you might need?
I suggest you upgrade to the latest Monodevelop version (3.04). In past releases there was a little bug that allowed what you describe to happen. In my experience it was project specific, meaning, when happened, happened only in one project, usually the last one I was working on.
In the meantime here is a simple workaround to use when that problem happens:
When that happened to me in the past (using version Monodevelop 2.6 on Ubuntu) I found that if I open, compile and run successfully another project, and then go back to try and compile the problematic project (in which the 'Build' options were greyed out) - the problem is solved and all 'Build' menu options become be available again.
I don't know what the bug was, but as I mentioned above, I did not experience the same bug in Monodevelop 3.04, so I recommend you upgrade.
Hope that helps!
I am trying to use Ganymede CDT to index our large codebase. It is painfully slow, can take a whole night to index the C++ files. Same project takes only 5 seconds to index with exuberant ctags 5.7.
Is there some way to find what the root of the problem is and to speed it up?
Maybe turn on logging in CDT, or some obscure option somewhere that I missed?
If you use the "full indexer" this would not surprise me. I'm using the "fast indexer", it is very fast and works pretty well (even with wxWidgets).
You can change your indexer settings in Window->Preferences->C/C++->Indexer.
Do you know if this is a regression from 5.0.0? In that case you should definitely open a bugreport.
Is all of your code in the same project? That may have an impact.
We have a similar problem with Eclipse under Windows; in our case, it is because of an old version of cygwin.
To know if you have the same issue, just check with Process Explorer if Eclipse spawns cygpath.exe, and it does not complete in a reasonable time.
In case this is the cause of the problem, then it is enough to just put the last version of cygpath.exe and cygwin1.dll in eclipse directory, and then you are done.
Good luck!