I set up a virtual environment for a Django-React project. I have created the .bashrc in the user home directory, and .envrc file in the root folder of the project repo. But when I tried 'direnv allow' it always return '.envrc does not exit' with a weird referenced folder path. Can someone please help?
direnv allow error
direnv status
I'm doing it on Windows 11.
I tried to re-install everything and change the position of the folder from E to C driver. I also tried to rename the folder to anything else to see if any of it results in the weird folder path. But the error message remains.
Related
I'm just simply trying to open up a VS 2017 project. When I open the solution, I get the following error message:
Creation of the virtual directory http://localhost:58051/failed with the error: Filename: \?\C:\Users\Visual Studio 2017\Projects\Testing\Version 2.0.vs\config\applicationhost.config Error: Cannot write configuration file
I've checked the folders along the file path and they are not encrypted. All the folders along the file path have a black box for the Read Only attribute. When I go to the config folder and clear out the black box for the Read Only attribute and Apply the setting, I find if I exit and go back to the same folder, the black box reappears for the Read Only attribute. I've read that the black box doesn't really mean the Read Only attribute has been turned on. If the Read Only attribute was actually turned on, I should expect to see a check mark instead. However, this doesn't explain why I can't open the solution.
After I click the OK Button to the VS Error message, VS just says the solution is "(unavailable)" in the Solution Explorer.
Any help would be greatly appreciated.
I too had this problem with my project files located on OneDrive. The way I resolved it was I renamed the applicationhost.config file located in the ".vs\config" directory of your root project directory then reloaded the web project. This will create a new applicationhost.config file.
I had the same error message sharing a project between 2 machines via OneDrive and fixed it as follows:
1 - Closed VS.Net
2 - Opened [myappnamefolder].vs\config\applicationhost.config in Notepad
3 - Searched the open file for the filename in my error message (In your case C:\Users\Visual Studio 2017\Projects\Testing\Version 2.0.vs\config\applicationhost.config ).
It was found under system.applicationHost, sites, site name, application path, virtualDirectory - physicalPath
4 - Amended the physicalPath value to point to the valid path of the project's config file as above.
5 - Saved the applicationhost.config file
My paths were different because I had different home user directories on each machine. (User A & User B)
I have resolved this error with this way mention as below:
STEP 1:
Go to on that path
C:\Users\navz\OneDrive\Documents\IISExpress\config
STEP2:
When you reach on this folder "config"
in this folder we can see "applicationhost" file
STEP3:
Close the Visual studio existing project and delete the applicationhost file(see on Step 2 path)
Then open the existing project again, it will be reloaded automatically and work properly.
Had same problem then looked into vs\config\applicationhost.config and it was encrypted. I unencrypted file and solution loaded with no problems.
I've had this problem several times using VS 2017 with Onedrive. Resolved it by renaming the application.config and having VS recreate it. Just as well could have edited line in the file. See the Diff below as an example.
The config file is located in something like C:\Code\MyProject\.vs\config\.
I just encountered this error. I followed the steps in this answer: https://stackoverflow.com/a/50508207/1166163
When I tried to save my changes I realised TFS had marked the file as read-only, preventing VS from updating the value. Removing the read-only attribute fixed the problem.
None of the above worked for me. I ended up deleting and recloning the repo that was giving me problems. It then opened up just fine.
Windows 10 Defender was causing this for me. When I disabled control folder access it worked again. Odd, because it had been working with that setting on for a while.
my drives were different - but the main codebase was shared between the two machines - so on one it was in the d drive - so i mapped the parent subdirectory on the second machine to be the d drive ... which resulted in the same paths then on both ... i just had to open the solution from the d drive on the second machine
I am currently working on the cadasta - an open source organisation's - Django project.
They require you to run their platform in a virtual machine (virtualbox) using vagrant.
As I enter their repository, and run their server using ./runserver, I am all of a sudden getting a CompileError which says:
File to import not found or unreadable: bootstrap-sass/assets/stylesheets/bootstrap/variables. Parent style sheet: /vagrant/cadasta/core/static/css/_variables.scss.
on line 74 of core/static/css/_variables.scss
#import "bootstrap-sass/assets/stylesheets/bootstrap/variables";
Following this link: https://github.com/jrief/djangocms-cascade/issues/130,
I found that libsass is already installed, and so I tried installing bootstrap-sass inside the VM, but it did no good. Everything was working fine until I renamed the cadasta-platform directory (i.e their github repo that I cloned, and so the main project is included inside this folder only.) and refreshed. I even tried running the server again, but couldn't get through this error. I suppose renaming the directory shouldn't be the cause?
I have no clue on how to proceed. Please help.
EDIT: After renaming the project folder to the same name solved this error. If anyone would ever like to answer this question, please explain why renaming the project directory produces an error like this? As I believe, I think renaming should not be an issue?
I am trying to add the application manifest to a program built with C++Builder 2006, by following this article.
(The manifest is to obtain admin rights for my program, which contains "setup" in his name and so it triggers the “This program may not have installed correctly” warning).
I have the MyApp_Setup.exe.manifest in the project folder, along with the MyApp_Setup1.rc file, which is present in the project.
When i try to build, i get:
[RC Fatal Error] MyApp_Setup1.rc(1): File creation failed
What i'm doing wrong, or what should I do?
question edited 'cause i messed up the filenames and the output error didn't matched
Found the problem.
In the project options I always set an "_obj" output folder, but the resource compiler WANTS an existing "debug_build" folder to write the .res file.
It don't create the directory, hence the error in the file creation.
If i remove the "Obj" option, or once you have the "Debug_Build" folder present, everything compiles.
so i downloaded codeblocks codeblocks-13.12mingw-setup-TDM-GCC-481.exe
when i try to run main.cpp i get this error message:
Failed to open 'C:\Users\$imba\Documents\Codeblocks projects\test\main.cpp'.
this is a detailed summary of what i did prior to opening main.cpp
i selected the defaults all the way through the end. I created a seperate folder (called Codeblocks projects) in my documents to save the projects in.
now when i went to create a new folder, i selected console application, C++ and then i named my project test. i decided to create the project in the Codeblocks projects folder that i created. the resulting filename comes out to be C:\Users\$imba\Documents\Codeblocks projects\test\test.cbd
i then selected
GNU GCC Compiler,
'Create Debug Configuration: Debug'
output dir: bin\Debug\
object dir.: obj\Debug\
i selected create Release configuration,: 'Release'
output dir.: bin\release\
objects output dir.: obj\ Release
Finish
when i double click on main.cpp is when i get the error message
Failed to open 'C:\Users\$imba\Documents\Codeblocks projects\test\main.cpp'.
please help, i need this program for my course.
Try saving it in a folder in C:\, like C:\Cpp\. Code::Blocks may be having problems with the space or the $ in the file path.
I just created a new folder CB-Project under my D: drive where I have codeblocks installed.
You may want to look in the directory that you have CB installed in first, you may also find this in program file (x86) or the codeblocks sub directory. Look for a file named that may have proj or project in it's name. If you don't find it you can just create a new folder. You will have to put the new folder name in the CB path so it will find it.
When I build, it succeeds with no errors. However, when I run from the IDE, I get an error (my image fails to load because it cannot find the directory).
However, if I go into the folder and run the program(.exe) it finds the image directory perfectly.
mTextures.Load(Textures::Background, "../GFX/Background.png");
^the line of code giving the directory.
I assume this is a problem with a setting I didn't enter correctly in my compiler?
I am using Code::Blocks on Windows.
Your debugger's current directory (i.e. the current directory used when you execute the application from within codeblock) is probably incorrect. Check your project settings, and fix the current directory to your target directory (the one which contains the executable itself).
Specific instructions are here.
It's because you're using a relative path in your file name:
"../GFX/Background.png"
the .. is saying "go up one directory form the current directory". If you want to be able to run your program anywhere, use an absolute path, something like:
"/home/me/GFX/Background.png"
Add the full path where the image exist with double slash.
mTextures.Load(Textures::Background, "C:\\Program Files\\..\\..\\GFX\\Background.png");